Accidents can happen at any time, and they can be very costly. In this article, we will look at a few machinery accidents that have occurred in Pueblo Colorado in recent years. We’ll explore the causes of these accidents, and discuss what steps businesses can take to avoid them.
Accident Statistics
In the past two years, there have been a total of six accidents involving Pueblo Colorado machinery. Injuries in these accidents range from minor to serious, and four of them have resulted in fatalities.
One of the most serious accidents occurred on July 8th, 2014, when a grain auger operated by an eighth-generation farmer tore through the roof of his barn, causing massive structural damage. The farmer was killed as a result of the accident, and his three sons were seriously injured.
On October 12th, 2013, a tractor-trailer collided with a Pueblo Colorado snowplow while both vehicles were traveling on I-25. The snowplow operator was fatally injured in the accident and four other people were taken to the hospital with injuries.
On February 21st, 2013, a mobile crane collapsed while lifting a load into a warehouse in Pueblo. The crane operator was fatally injured in the accident and two other people were taken to the hospital with injuries.
In each of these six accidents, it is unclear what caused the machinery to malfunction or fail. However, all six accidents have led to at least one person being injured and one person dead. It is important for
Manufacturing Companies
Manufacturing companies located in Pueblo Colorado include
| Cs Wind America, Inc. CF&i Steel, L.P. Atlas Pacific Engineering Company Summit Pressed Brick & Tile Co Inc Colorado Best Block, LLC Haddonstone Management Company Mountain States Sheet Metal Company |
Pueblo Diversified Industries, Inc. Pewag Traction Chain Inc. Cooper & Turner Manufacturing LLC Folium Biosciences, LLC Jurgens, Inc. Pueblo Truss Co Inc Western Scrap Processing Co., Inc. |
With its close proximity to Denver and the Rocky Mountains, Pueblo is a great location for manufacturing companies.
Machinery Accidents
In Pueblo Colorado, machinery accidents can happen due to a number of reasons. Some common causes of these accidents include operator error, defective equipment, and faulty mechanics. Regardless of the cause, when machinery accidents occur there is always potential for serious injury or death.
Here are some examples of machinery accidents that have occurred in Pueblo Colorado:
In 2009, a construction worker was injured when a piece of equipment he was using malfunctioned and fell on him.
In 2011, a tractor-trailer rig collided with a tanker truck, causing an explosion that injured several people. The tractor-trailer rig was driving without proper lights and received registered owner status without having undergone required safety inspections.
In 2012, a grain silo collapsed after being struck by lightning. The collapse caused the silo to fill with water and release its load of corn onto the ground, resulting in injuries to several people.
Pueblo Colorado machinery accidents can be devastating, and the consequences of an accident can last a lifetime. If you have been involved in a machinery accident in Pueblo Colorado and suffered injuries, contact a machinery accident lawyer. A lawyer can help you determine the extent of your injuries and what legal options are available to you.