Industrial Powered Post Hole Diggers are used to dig trenches, holes, and ditches. They’re powered by an engine that runs on diesel or gasoline. The engine is mounted on a shaft that’s connected to the digger’s arm. This arm has a post hole digging blade on it. The blade is attached to a motor that turns it. This motor powers the blade, which digs the trench, hole, or ditch.
Here are some examples of accidents that can happen when using an industrial powered post hole digger:
-Broken chain or belt – This is one of the most common accidents with these machines. If the chain or belt breaks, the machine will become uncontrollable and could cause serious injury or even death.
-Rollover – Another common accident is when the machine rolls over. If this happens, it can be dangerous if you are near it at the time. The machine could start moving quickly and easily overturning, which could result in injuries. Keep a safe distance from these machines at all times.
-Slippage – One of the most dangerous aspects of using an industrial powered post hole digger is if the ground becomes slippery. If this happens, the machine could quickly start moving in unexpected directions and could cause serious injury or even death
Some accidents that have occurred with post hole diggers are as follows:
An industrial powered post hole digger was inoperable when a contractor attempted to use it to dig a trench for a water main. The machine tipped over, dumping the operator and the machine into the trench. The operator was pronounced dead at the scene.
An industrial powered post hole digger was involved in an accident that caused injuries to the operator. The machine was traveling down a hill when it apparently lost power and began to roll backwards. The operator was unable to stop the machine quickly enough and it rolled into a group of trees, severing the operator’s arm.
According to reports, a worker was using an industrial powered post hole digger when it malfunctioned and began digging into the ground at high speed. The machine quickly became out of control, causing it to crash into another machine and cause significant damage. The operator was also injured in the accident.
Recently, an accident occurred with a post hole digger that left two people injured. The digger was operating in a confined area when the engine suddenly seized up, causing the machine to overturn. As a result, the two workers were thrown into the air and sustained injuries.
If you have been injured by a powered post hole digger, you should contact an attorney. Powered post hole diggers are dangerous machines and can cause serious injuries if they are not used correctly. An attorney can help you pursue compensation for your injuries.