Industrial plaster mixers are used in a variety of industries to make products like sealants, adhesives, and coatings. They are also used to make concrete, brick, and other masonry products. The process of using an industrial plaster mixer involves combining a number of different types of plaster powder together to form a slurry. The goal is to create a mixture that is thick enough to be used as a coating or sealant, but still flexible enough to be worked with easily.
Industrial plaster mixers can present a variety of hazards if not operated and maintained properly. Understanding the different types of accidents that these machines can cause is essential to keeping workers safe.
Here are some of the most common types of industrial plaster mixers and their potential accident causes:
Pipe Mixers: These mixers use pipes to move the plaster material around. If the pipe is not running smoothly or if it becomes obstructed, the mixer can start to shake and cause the plaster to fly out. This can lead to serious injuries.
Piston Mixers: These mixers use pistons to create a smooth mixture of plaster and water. If the piston becomes stuck, the mixer can start to shake and cause the plaster to fly out. This can lead to serious injuries.
Cone Mixers: These mixers use a series of cones to help disperse the plaster mixture evenly throughout the machine. If one of the cones becomes faulty, it can cause the mixer to shake and throw the plaster out in all directions. This can lead to serious injuries.
Here are four other common industrial plaster mixer related accidents:
Overdose: A worker may be injured if they are exposed to too much plaster while mixing the material. This could lead to serious burns or even death.
Overmixing: Plaster can become too thick and hard, leading to problems with the finished product. If this happens, it can cause the machine to break down and produce dangerous fumes.
Impact: Mixers can be knocked over or hit by objects while in use, leading to injuries. If the machine is filled with plaster, this could result in an explosion.
Falls: Mixers can fall off of tables or platforms, causing injury or death. If the machine is moving when it falls, it could cause serious damage or even fatalities.
Discharge: One common type of accident is the accidental discharge of the mixer. This occurs when something goes wrong with the machine, and the power is accidentally turned on. This can result in a mixture of plaster and water being released suddenly into the air. If this mixture is breathed in, it can cause respiratory problems.
Collisions: Another common type of accident is the collision between two machines. When two machines are operating close to each other, it is difficult to see what is going on and there is a high chance of an accident happening. Injuries can occur when one machine hits another, or when parts from one machine fall onto or into another machine.
Thermal Runaway: This happens when too much heat is applied to the machine, and it starts to spin out of control. The faster the mixer spins, the greater the amount of heat that is generated. This can lead to a fire, which can be very dangerous and destructive.
If you have been injured by a plaster mixer, it is important to contact an attorney. Depending on the extent of your injuries, you may be entitled to compensation. An attorney can help you identify any legal rights that you may have and can provide advice on how to pursue them.