DateCityStateEmployerBody PartEvent
2020-01-15ZavallaTexasAWP, Inc.Multiple body partsPedestrian struck by forward-moving vehicle in work zone
An employee was setting up a lane closure. A Truck Mounted Attenuator (TMA) was stationed in the roadway with the crash cushion in the downward position. The arrow board was mounted on the TMA in the upward position with the arrow activated instructing the traffic to move over. The pilot vehicle with a trailer attached was approximately 102 feet in front of the TMA. The employee was between the pilot vehicle and the TMA, standing on the berm of the road with one foot on the berm and one foot on
2017-01-19BillingsMontanaWindstone Medical Packaging Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was preparing to unload a truck mounted shipping container by activating the dock plate which is manually operated with a handle. While lowering the dock plate onto the back of the truck, the dock plate recoiled upon striking the right side of the truck causing the plate not to clear the truck as required to lay flat for unloading operations. The employee's left ring finger was pinched between the steel dock plate and left side steel edge of the dock plate.
2016-08-26LewisburgOhioCaldwell Ready MixFinger(s), fingernail(s)Compressed or pinched between two stationary objects
An employee was checking bolts on a truck mounted rolling concrete mixer. The employee reached for a wrench that was stuck on the mixer and pinched the right index finger between the wrench and truck mounted pedestal. The initial injury was a severe laceration that later became a surgical amputation.
2016-07-13WyattWest VirginiWaco Oil & Gas CompanyHip(s)Other fall to lower level less than 6 feet
An employee slipped off the bottom rung of a truck mounted ladder and fell to the ground, resulting in a fractured right hip.