DateCityStateEmployerBody PartEvent
2021-11-04LulaGaSAC Wireless LLCMultiple head locationsStruck by object or equipment
A 3-inch rigid steel pipe was being set under a raised concrete slab. The pipe struck an employee in the upper torso and head. The employee suffered facial fractures and a skull fracture and was hospitalized.
2021-10-30Saint MarysPaMersen USA St. Marys - PA CorpFingertip(s)Compressed or pinched by shifting objects or equipment
Three employees were installing louvers using a crane (one employee in the crane, two on the ground). The crane raised a louver and an employee's right index and middle fingers were pinched between the top of the louver and the bottom of a catwalk. Both fingertips were amputated.
2021-10-29KohlerWiKOHLER CO.Fingertip(s)Caught in or compressed by equipment or objects
An employee was moving packed ware from the end of a conveyor to a pallet using a hoist. As the employee raised the hoist, her left index finger became pinched on the lifting device, resulting in a fingertip amputation.
2021-10-28LubbockTxSIMFLO, LLCChest, except internal location of diseases or disordersOther fall to lower level 6 to 10 feet
At about 3:00 p.m. on October 28, 2021, an employee was on a work platform, which had been raised by a forklift 8-10 feet off the floor so he could access the control box for an overhead door that had stopped working. A door on the platform swung open and the employee fell backward to the floor, landing on the back left side of his body. He suffered six broken ribs on the left side and was hospitalized.
2021-10-26NorthbrookIlArgo Roofing CompanyHead and neckFall through surface or existing opening 16 to 20 feet
On October 26, 2021, at approximately 10:25 a.m. an employee was performing roofing work on a commercial building and was walking backward moving a propane tank with a handcart. While moving the propane tank, the employee tripped over the raised lip of an unprotected skylight and fell through it to the concrete floor 20 feet below. The employee sustained a fractured cervical vertebra and multiple skull fractures.
2021-10-21JonesboroArDelta Materials HandlingMultiple body partsStruck by falling object or equipment, n.e.c.
An employee was standing under the slip sheet attachment of a forklift, which was raised in the air as the employee installed a lift chain. The push-pole attachment fell on the employee and resulted in severe injuries to the shoulder, back, legs, and hip. The employee was hospitalized.
2021-10-20HooverAlCahaba Services LLCLumbar regionOther fall to lower level more than 30 feet
An employee set up an aerial lift with two outriggers positioned on a road and the other two on an embankment. The employee raised the aerial lift approximately 45-50 feet high to prepare to trim a tree when the embankment gave way and caused one of the lift's legs to slide. The lift fell over and the employee landed on the ground outside of the basket, resulting in compression back fractures at the L1 and L4 vertebrae and damage to the L1, L3, and L4 vertebrae that required hospitalization. The
2021-10-11Saint LouisMoCauttrell Enterprises, Inc.Leg(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was standing beside a stack of steel beams that had been lifted with an overhead crane. After trying to move the chain with the hook away from under the stack, the employee raised the crane. The chain hooked back onto the beams, causing them to fall onto the employee and to fracture both legs.
2021-10-01Kansas CityMoFedEx GroundArm(s)Other fall to lower level
An employee was loading a trailer with the flap raised when they fell into the belly of the trailer and fractured an arm.
2021-09-27OrangeTxDeep South Cleaning & RiggingAnkle(s)Other fall to lower level less than 6 feet
An employee was attempting to access the front of a third-party trailer to prepare to land a motor for a site. The employee stepped onto the passenger-side drop axle with his left foot and the drop axle was raised, causing it to roll. The employee lost footing and fell 46 inches to the ground. The employee's left ankle was fractured.
2021-09-24RobinsonIlHershey Chocolate & Confectionery CorporationFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
On 09/24/2021, at approximately 4:30 PM, three employees were cleaning a toffee cooker. The toffee cooker consists of an upper plate and a lower plate that are raised and lowered to separate the cooker. The toffee cooker was locked out/tagged out. Once the toffee cooker was cleaned, the gasket was installed and it was ready to be closed up. Lockout/tagout was removed. The injured employee reached to adjust the seal as the lower piece come up into place and their right little finger got caught be
2021-09-24San MarcosTxHEB Distribution CenterThigh(s)Nonroadway collision with object other than vehicle, n.e.c.
An employee was operating a stand-up forklift carrying a raised load. The forklift struck a structure above it in a warehouse. It fell over and landed on the employee, who suffered a laceration to an artery in the inner thigh.
2021-09-17ArlingtonTxCSI Calendering, IncFingertip(s)Nonroadway collision with other vehicle
Two employees were backing out a pair of forklifts. The forklift in the rear stopped, with its forks still raised, and began to advance. A pallet on the forks struck the right hand of the employee who was operating the forklift in front. His middle fingertip was amputated.
2021-09-07CamdenNjEMR Eastern LLCHand(s)Compressed or pinched by shifting objects or equipment
An employee was adjusting a car lift arm when the lift arm raised up, pinning the employee's hand between the lift arm and a car. The employee sustained fractures to the hand.
2021-09-01CullmanAlU.S.A. Healthcare-LTC, L.L.C.Thigh(s)Fall on same level due to tripping on uneven surface
An employee tripped and fell on a raised area of the floor and sustained a fracture to their femur.
2021-08-25LincolnNeGana Trucking & ExcavatingLeg(s)Struck by falling object or equipment, n.e.c.
Employees were trying to fix a hose on a skid loader's concrete breaker attachment. The skid loader attached to the breaker, raised it, and began to rotate it forward to give the mechanic access. The breaker fell off the skid loader and broke the right leg of the mechanic, who was standing to the left front of the skid loader.
2021-08-20DallasTxBetsy Ross Flag Girl, Inc.BODY SYSTEMSIndirect exposure to electricity, greater than 220 volts
An employee was positioning a pole to be raised up. The pole hit an overhead power line and the employee was shocked.
2021-08-19TopekaKsMidway Sales & Distributing, IncMultiple body partsOther fall to lower level
An employee fell backward from a truck bed to the ground, hitting raised concrete. He suffered injuries to the left shoulder and ribs and was hospitalized.
2021-07-31BlythevilleArH and M Construction Co., Inc.Finger(s), fingernail(s)Struck by falling object or equipment, n.e.c.
An employee was lying on a concrete slab immediately next to an unloader. The unloader had been raised on a hydraulic jack so the employee could make a shim adjustment to it. When the employee lowered the unloader after making the adjustment, it fell and struck the employee, who suffered a 10-inch horizontal laceration to the chest; the amputation of three fingers on the left hand; a cut to the left side of the head; cuts on the upper right arm; and bruises to the back, left hip, and right shoul
2021-07-27BrentonWvDiversified Gas & Oil CorporationFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee raised a well pump jack and placed the top and bottom rod clamps on the lifting rod. The bottom rod clamp slipped, causing the well pump jack to lower and amputate the employee's left thumb.
2021-07-16MontgomeryAlSabel Steel Service, Inc.Multiple face locationsStruck by dislodged flying object, particle
An employee was putting wood under a 500-pound steel cutout that had been raised by a magnet crane. The cutout fell from the crane and hit the wood, which flew up and struck the employee in the face. The employee suffered a broken front jaw and several broken teeth.
2021-07-15BellefontaineOhSpartanNashArm(s)Other fall to lower level 6 to 10 feet
On July 15, 2021, at 12:55 p.m., an employee stepped off a raised selection area onto a pallet in order to reach product when the pallet shifted, causing the employee to fall approximately 6.5 feet onto a pallet of product. The employee was hospitalized with a fractured right arm.
2021-07-09GrapevineTxWorldwide Flight ServicesFinger(s), fingernail(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee raised a pallet with his forklift in order to record information written on the pallet. While he was recording the information, the pallet slipped off the forklift's tines and crushed his finger. The finger was amputated.
2021-07-09SpringfieldIlE.L. Pruitt CompanyLeg(s)Other fall to lower level 11 to 15 feet
An employee was climbing a fixed ladder to access a raised mezzanine, slipped, and fell 8-12 feet to the concrete floor. The employee suffered a fractured leg.
2021-07-07DallasTxAmerican Fire Protection Group, IncHand(s), except finger(s)Compressed or pinched by shifting objects or equipment
An employee was in a manlift mounted on a forklift. When the manlift was raised, the employee's right hand was pinched between the lift bucket and a ceiling joist. The employee suffered a broken knuckle.
2021-06-22LagrangeOhUnited States Postal ServiceMultiple body partsOther fall to lower level
On June 22, 2021, an employee was working from a raised scissor lift, stepped backward, and fell from the lift onto the ground. The employee suffered a concussion and spinal fractures.
2021-06-01TillarArTimber Producers Selma Sawmill Division, LLCAnkle(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was removing the bands from a package of 12-foot logs, which had been raised on a forklift and supported at each end with more logs. When the employee cut the last band, the logs fell on his ankles and broke both of them.
2021-05-26AlbertvilleAlTyson Foods, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was checking a strapping machine that was not working. The employee raised the platform on the strapping machine from the deck and was caught between one of the rollers and the metal platform. The employee suffered an amputation to the right pinky finger and was hospitalized.
2021-05-23GreenupIlEvapco, Inc.Thigh(s)Climbing or stepping up or down-single episode
After changing an air filter in an attic area, a mechanic was getting down from a raised area (2-3 feet) when she suffered a left femur fracture resulting in hospitalization and surgery.
2021-05-20DaltonGaUnited Weavers of America, Inc.Multiple body partsOther fall to lower level
An employee was retrieving carpet rolls from a shelf located about nine feet above the ground while standing on a platform that was raised on the forks of a forklift in order to reach the shelf. Two of the platform brackets broke off causing the platform to tilt to one side. The employee lost balance and fell onto the concrete floor, resulting in a fractured left leg and a concussion. The employee was hospitalized.
2021-05-19GibsontonFlDHL Supply ChainToes(s), toenail(s)Struck by swinging part of powered vehicle
An employee was making a delivery to a customer location. The employee's foot was caught between the truck's liftgate and the rear bumper as the liftgate was raised causing a crushing injury to his right big toe.
2021-05-10OxfordMsOxford University TransitThigh(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was working on a bus. The bus slid off the jack it had been raised on and landed on the employee's inner thigh, injuring it.
2021-04-27NeedmorePaMellott Wood Preserving, IncorporatedHand(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was clearing backed-up ties on a trimming line. When the machine was turned back on, the chain raised quickly and crushed his left hand between the timber and the chain.
2021-04-26MogadoreOhRubbermaid Inc.Hip(s)Fall on same level due to tripping over an object
An employee was removing boxes off the main conveyor when she tripped on boxes that were on the floor. The employee fell forward onto the ground and landed between the steps that lead to the raised pallet. The employee's right hip was fractured.
2021-04-21Blue SpringsMoGreatLIFE KCShoulder(s) and arm(s)Struck by falling object or equipment, n.e.c.
An employee was trimming trees from a raised bucket. A branch fell into the employee, knocking them out of the basket. The employee suffered a broken left arm, a broken left shoulder, and back injuries.
2021-04-12AlbertvilleAlAmericold Logistics, LLCThigh(s)Collision between a moving and standing vehicle, nonroadway
An employee was operating a stand-up forklift when it backed into the raised forks of another, parked forklift. The employee suffered lacerations to the back of his left thigh.
2021-04-12WareMaGillespie CorporationShoulder(s), including clavicle(s), scapula(e)Other fall to lower level less than 6 feet
An employee was working in an elevator that was being built. While stepping from the floor of the elevator (which was raised 4 feet off the floor on sawhorses) to an 8-foot fiberglass ladder, he missed his rung and fell backwards, landing on his shoulder on the floor. He suffered a shoulder injury.
2021-04-09FargoNdMagnum Contracting, Inc.NonclassifiableOther fall to lower level 11 to 15 feet
An employee was climbing an extension ladder with his tools in a bucket. As he reached the top of the ladder and raised the bucket to the third floor, he fell from the ladder onto the decking of the second floor 15 feet below. He suffered a broken vertebra.
2021-03-30HoustonTxJesse MunozEye(s)Other fall to lower level more than 30 feet
A hardware installer was working on the fourth level of an apartment construction site. The employee was reaching for hardware that was on a forklift that had been raised to the fourth level and fell to the ground. The employee sustained a broken orbital bone, and lacerations to the face, torso, and right arm near the armpit.
2021-03-30GreenwoodArForsgren IncBODY SYSTEMSIndirect exposure to electricity
An employee was spotting a dump truck. The truck raised its bed into a high-voltage overhead powerline while the employee was touching a hopper connected to the truck. The employee was shocked.
2021-03-01South Chicago HeightsIlCosmos Manufacturing, Inc.Ankle(s) and leg(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee and a coworker were manually transferring a die set (593 pounds) from a maintenance table to an industrial cart. The cart consists of a stationary platform and a lift platform controlled by a chain and hydraulic cylinder operable by foot pump. After the two employees pulled the die set onto the raised lift platform from the table, the chain over the hydraulic cylinder came free from the threaded rod and nut that serve as an anchor point on the stationary platform, causing the lift pl
2021-02-25AshlandOhCabinet RestylersFinger(s), fingernail(s)Struck against moving part of machinery or equipment
An employee was using a table saw to cut molding pieces and amputated their right index finger. The guard was raised at the time.
2021-01-23BathMeGeneral DynamicsJaw, chinStruck by falling object or equipment, n.e.c.
A rigging hook had just been unhooked from a pipe that a crane had lowered. While the crane's cables were being raised, the hook caught onto the racking that was bracing the pipes. The tip of the hook broke off and struck an employee in the jaw, lacerating and possibly breaking it.
2020-10-15RochesterNyUniversity at RochesterBrainFall on same level while climbing stairs, steps, or curbs
An employee tripped on a raised curb near a building entrance. The employee fell across the sidewalk, striking their head on the base of a concrete pillar.
2020-10-09BraintreeMaWollaston AlloysFingertip(s)Caught in or compressed by equipment or objects
An employee was attempting to line up machined holes in a repaired gear box assembly's base plate to bolt it into the gear box cabinet. The gear box assembly was being raised into position and the employee was correcting the alignment when the gear box assembly shifted and caught his right hand between the upper interior cabinet and the gear box assembly resulting in amputation of the ring and middle fingertips.
2020-10-09WarrenPaUnited Refining CompanyFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
While working in the Rigger Shop, an employee was using channel lock pliers to disconnect two pieces of pipe that were bolted together. The pipe was raised by a crane. When the top bolt was removed, a portion of the pipe was pulled upward, and the other portion fell to floor. The employee's finger was pinched between lower handle of pliers and the portion of pipe supported by the crane. The employee suffered an amputation to his left ring finger.
2020-10-02Pine BluffArEvergreen Packaging, LLCLower leg(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was clearing a jam in front of the wood sorter gate before the chipper in-feed conveyor. The jammed wood had pushed the sorter gate up to nearly the full-open position. The employee attached a chain-fall to one of the jammed logs. As the log was raised, the rest of the jam was relieved and fell on the conveyor below. The sorter gate then closed on the employee's right leg crushing it between the gate, a piece of wood and the surrounding frame. The employee's lower right leg was fract
2020-10-02LincolnNeKawasaki Motors Manufacturing Corporation, U.S.A.Chest, except internal location of diseases or disordersMultiple types of overexertion involving outside sources
An employee suffered a collapsed lung while lifting a jet ski hull that was raised on a hoist, pushing it sideways four feet to the press, and lowering it into place on the bonding machine. The employee was hospitalized.
2020-09-29El PasoTxDustrol Inc.Finger(s), fingernail(s)Struck by swinging part of powered vehicle
An employee was preparing to lift the averaging arm on a milling machine and place it in the locked position so the milling machine could back up and get into position to start a new cut on asphalt. The milling machine started backing up. Another employee grabbed the averaging arm by the end to help the first employee; it raised unbalanced, the opposite end teetered, stuck into the asphalt surface, and the end the second employee was holding lifted. The employee's right index and middle fingers
2020-09-28PhiladelphiaPaDietz & WatsonPelvisOther fall to lower level less than 6 feet
An employee was standing on the forks of a ride-on electric pallet jack which were raised approximately 9-12 inches from the floor to retrieve a box that was approximately six feet from ground level. The employee's knee gave out and the employee fell to the ground hitting the forks of the pallet jack in the process. The employee sustained a possible pelvic fracture.
2020-09-08DefianceOhBLACK HORSE CARRIERS INCMultiple body partsOther fall to lower level
An employee was loading a truck when he tripped over a pallet and fell from the raised gate to the ground. The employee was hospitalized with a broken wrist and pelvis.
2020-09-05BellevilleIlLowes Home Centers LLCHead, neck, and trunkOther fall to lower level less than 6 feet
On 9/5/2020, at approximately 10:40 a.m., a Lowe's employee was making a delivery at a customer's home. The employee had positioned a washer on the lift gate of the delivery truck and was attempting to step around the washer when he fell off the lift gate, which was raised several feet off the ground. As the employee fell, he grabbed the washer and pulled it down on top of him. The washer landed on his abdomen. He was hospitalized with fractured ribs, a fractured C7 vertebra, and a head injury.
2020-09-02Daytona BeachFlHalifax Health Services, LLCUpper arm(s)Fall on same level due to tripping on uneven surface
While walking across the parking lot, an employee tripped on a section of raised asphalt and fell to the ground. The employee was hospitalized with a fractured upper right arm.
2020-08-28Chippewa FallsWiHuffcutt Concrete LLCFingertip(s)Caught in running equipment or machinery, n.e.c.
On August 28, 2020, an employee was affixing the D-ring of a pallet lifting device to the sling hook of an overhead crane when the crane's hook was raised. The employee's left thumb was caught between the crane hook and the D-ring, and the thumb tip was amputated.
2020-08-28YorkvilleIlCemen-Tech Inc.Elbow(s)Other fall to lower level 11 to 15 feet
An employee was trying to repair an auger in a volumetric cement mixer when the employee fell 7 to 13 feet out of a raised bucket truck to the ground below. The employee suffered fractures to the elbow, resulting in surgery and hospitalization.
2020-08-26TheodoreAlWolseley Industrial GroupFingertip(s)Caught in running equipment or machinery during regular operation
An employee was helping a crane operator move a valve off a pallet. The employee hooked up the valve by the shaft. When it was raised, the valve shifted and caught the employee's right index finger against the crane block. The fingertip was amputated.
2020-08-25NewtownPaJAMES D. MORRISSEY, INC.Ankle(s)Struck by falling object or equipment
An employee was cleaning the bottom lock area of a raised dump truck bed when a chunk of asphalt fell down the bed and hit him, fracturing his ankle.
2020-08-13DecaturAlA-LERT Construction Services, Inc.Foot (feet)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was spotting a forklift as it moved a 11,642-pound steel shaft. The shaft moved, and when the forklift tines were raised it was knocked off its wooden end supports. It rolled over onto the employee's foot, crushing the top and middle parts of the foot. The foot was amputated just below the ankle.
2020-08-10WestburyNyEdison Power ConstructorsHand(s)Direct exposure to electricity, greater than 220 volts
An employee was in a bucket truck in the raised position to perform power line repairs. While removing some foliage from the power lines, the employee was shocked by the power lines, and sustained burns to both hands.
2020-08-01VestaviaAlUnited Towing and TransportForearm(s)Struck by other falling powered vehicle
An employee was under a disabled vehicle that had been raised on a flatbed truck. The vehicle rolled off the bed of the truck and its tire landed on the employee's right forearm, causing multiple fractures.
2020-07-22McconnelsvilleOhioGEORGE J. IGEL & COMPANY, INC.Fingertip(s)Struck by swinging part of powered vehicle
A road project was utilizing two excavator mounted drilling attachments, which have telescoping Kelly bars to make the drill bit go down into the ground. Two mechanics came out to inspect the Kelly bars. The injured mechanic was facing the excavator operator and signaled the operator to raise the boom, but the Kelly bar raised/collapsed instead. The injured mechanic’s right hand slipped into the inner and outer Kelly bars of the drill and the first, middle, and ring fingers were injured. The top
2020-07-20HomosassaFloridaEagle Buick GMCChest, except internal location of diseases or disordersCaught in running equipment or machinery during maintenance, cleaning
An employee was under a truck using a stethoscope to diagnose a problem. The rear of the truck was on a lift, raised about 1 foot; the front of the truck was on the ground. The employee was pinned under a spinning tire and sustained chest compression.
2020-07-14Tipp CityOhioMENARD, INC.Leg(s)Other fall to lower level
An employee was on the raised platform of an order selector. While trying to reach something, he fell to the ground resulting in fractures to both legs.
2020-06-29San AntonioTexasArnold Oil CompanyHand(s)Caught in or compressed by equipment or objects
An employee was doing maintenance work on a raised automotive lift. The lift's automated locking mechanism failed and it dropped, trapping his hands beneath it. Both hands were severely lacerated. The employee was hospitalized.
2020-06-27Oklahoma CityOklahomaG L Z Acoustics, LLC BrainOther fall to lower level less than 6 feet
An employee was working on a scaffold raised to a height of approximately four feet to install can light trim and sheet rock the ceiling. As the employee exited the end of the scaffold, he mis-stepped on the rung of the ladder integrated to the scaffold. He fell backward and struck his head on the wall. His hard hat fell off and then his head struck the floor. He was hospitalized for a fractured skull and bleeding in the brain.
2020-06-25Palmetto BayFloridaEnvirowaste Services Group, IncPelvisStruck by other falling powered vehicle
A mechanic was working under a vehicle that had been raised on jacks. The jacks were released and the vehicle came down; its tires rolled toward the employee's back and he suffered a broken pelvis.
2020-06-25ElizabethNew JerseyHome DepotFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
A truck's lift gate was raised while the driver's hand was on it. The gate pinched the driver's left thumb,
2020-06-22HuttoTexasBWT's Welding & Associates, Inc. BrainOther fall to lower level
An employee was on a forklift's forks, which had been raised so he could unwrap a tarpaulin. As he unwrapped the tarp, he was dragged off the forks and fell to the ground, injuring his head on the concrete driveway.
2020-06-16RussellvilleAlabamaFranklin Structures, LLCFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was preparing to put a camper in a frame. He raised the jig while his hand was resting on the block. When he lowered the jig, his left thumb was caught between the I-beam and the block, resulting in a thumb tip amputation.
2020-06-03El PasoTexasMount Franklin FoodsFingertip(s)Struck by swinging part of powered vehicle
At about 8:55 p.m., an employee trying to dump waste into a large container using a forklift with a self-dumping attachment. As the forks were raised, the load shifted and pinched his left ring finger, partially amputating it. The employee was hospitalized.
2020-04-13Mount VernonIllinoisHogan Transports, Inc.Hip(s)Other fall to lower level less than 6 feet
The injured employee walked across the customer's parking lot to help another driver who was working in a trailer. The injured employee was entering the back of the trailer by climbing up the side of the lift gate, while it was in the raised position. The injured employee slipped and fell approximately 3 feet to the ground, landing on their hip. The injured employee was hospitalized with a fractured right hip and required surgery.
2020-04-13DunkirkNew YorkFIELDBROOK FOODS CORP.Multiple lower extremities locationsContact with hot objects or substances
An employee was hooking up piping connections. He removed a pipe from a tank that was filled with hot water. When he raised the pipe up, it filled his boot with hot water. The water burned his lower leg and foot.
2020-03-31De SotoKansasHuhtamaki IncFinger(s), fingernail(s)Struck by or caught in swinging door or gate
An employee was changing out a broken cable. The cable was raised and had a punch installed to hold the weight of the door while the employee was performing the maintenance. When the cable was replaced, the weight of the door dropped, resulting in an amputation of the employee's left middle finger to the joint and a damaged ring finger.
2020-03-26Marble FallsTexasRoss Construction IncBack, including spine, spinal cordStruck by object or equipment
An employee was in a 3-foot ditch, unhooking a cement curb inlet. The inlet was raised before it was completely unhooked and struck the employee, causing a back injury.
2020-03-17HoustonTexasValmont Industries - United GalvanizingFinger(s), fingernail(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was preparing to raise a steel frame using an overhead crane and chain sling. The tip of the crane hook was being used to raise the frame. After the frame was raised 6-12 inches from the floor, the employee went to position the chain and the frame fell onto his left hand. He sustained amputations to the middle, ring, and pinky fingers and was hospitalized.
2020-03-10BreeseIllinoisBuilders First SourceLower leg(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was behind a truck, preparing to dump one of two pallets of lumber from the truck's dump body (which had been raised so the lumber could be unloaded). The other pallet slid off the truck and struck the employee's lower leg, breaking it.
2020-03-04JacksonvilleFloridaMILTON J. WOOD COMPANYUpper and lower limb(s)Fall through surface or existing opening
An employee had been inspecting an HVAC unit on the roof of a building. He then climbed down the first section of a fixed ladder from the roof and was standing on a metal platform before climbing down the second section of the ladder. He fell through the opening in the platform where the second section of the ladder starts, and landed on the ladder's base, which is a raised metal platform. He sustained fractures to the left arm and right ankle.
2020-03-01AustinTexasLSG Sky ChefsSkullOther fall to lower level
On March 1, 2020, at approximately 5:40 a.m., the injured employee was catering a flight with employees 2 and 3. While the catering box on the lift truck was elevated, employees 2 and 3 were closing the aircraft's door and heard a noise. They observed the injured employee on the ground below. It is believed that the injured employee was inside the catering box while it was raised to service the aircraft and fell out after the box's door was opened. The injured employee sustained a skull fracture
2020-02-21MeridianMississippiSnyder Environmental and Construction LLCEar(s)Struck against stationary object or equipment while rising
Two employees were working in a lift. The lift was raised and a beam struck one employee's hard hat, cutting the employee's ear.
2020-02-14TalladegaAlabamaVulcan Materials Company, Inc.Multiple body partsContact with hot objects or substances
An employee was using a skid-steer to clean up debris and dump it into an over-the-road dump truck. The dump truck's bed was partially raised. The employee exited the skid-steer and stood behind the truck. Hot asphalt flowed from the truck bed onto the employee resulting in second and third degree burns to the hands and face. The employee was hospitalized.
2020-02-12MaconGeorgiaE.R. Snell Contractor, Inc.Finger(s), fingernail(s)Struck by swinging part of powered vehicle
After a concrete bucket was filled from a chute, the chute was raised up and crushed the left little finger of the employee who had been filling the bucket. The employee suffered an amputation to the finger.
2020-01-26LiberalKansasPackers Sanitation Services Inc., LTD.Lower leg(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was rinsing equipment with a high-pressure hose when he raised one of his legs approximately 3 feet off the ground and his foot entered an opening in the side of the equipment. His foot became entangled with the equipment, resulting in an amputation at the left knee.
2020-01-22ConroeTexasWMC SteelFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was repairing a flexible cable tray on a production machine. The tray was raised using a bottle jack. The bottle jack kicked out while the employee's finger was in an alignment hole on the flexible cable tray, resulting in a left index fingertip amputation.
2020-01-22ChicagoIllinoisCHICAGO TRIBUNE COMPANY, LLCFinger(s), fingernail(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was loading a roll of paper (500 to 800 lbs.) from a railcar onto a powered industrial vehicle (PIV) when the roll fell on top of the employee's PIV protective cage. The employee raised his hand to protect himself and his fingers went outside of the cage and were crushed between the bar of the cage and the roll of paper. As a result, he sustained a partial amputation of his left index finger and debridement of his left middle finger.
2020-01-13SavannahGeorgiaCHATHAM STEEL CORP.Finger(s), fingernail(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was operating a gantry crane. The crane raised two steel plates instead of one, and the lower plate slipped from a clamp and landed on the employee's left index finger. The finger was partially amputated at the first joint.
2020-01-08Lone TreeColoradoICSI Controls Fingertip(s)Direct exposure to electricity
An employee was low-voltage wiring HVAC equipment located under a raised floor. While attempting to de-energize the equipment, the employee's hand touched a live hot leg, receiving an electrical shock and burns to the left-hand fingertips. The employee was hospitalized.
2019-09-17Santa RosaCaliforniaU.S. Census Bureau, Los Angeles Regional Census CenterKnee(s)Fall on same level due to tripping on uneven surface
An employee was walking down a driveway. Her left foot hit raised pavement and she fell. Both her knees, both her hands, and her face struck the ground; she suffered a broken left patella, a sprained left wrist, and bruising under her lips.
2019-09-13WallingfordConnecticutInfra-Metals, Company Lower leg(s)Struck by swinging or slipping object, other than handheld, n.e.c.
On September 13, 2019, at approximately 10:10 p.m., the injured employee offered to help a second employee load three pieces of 20-foot angle onto a trailer using an overhead crane. During the lift, two of the angles became stuck together. The injured employee asked the second employee to further raise the south hoist. As the second employee lifted the angle, the injured employee attempted to release the raised angle from the adjacent angle. When the angles released, the angle being raised relea
2019-09-11MilanMissouriSmithfield Fresh Meats Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating the controls of a combo dumper. When the dumper was raised, it pinched his right little finger against the rail, causing the amputation of the finger.
2019-09-03Elm CreekNebraskaPMI Nebraska, LLCFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was placing a steel to block up a conveyor. The conveyor was being raised with a chain fall. It shifted and pinched the employee's left index fingertip, causing an amputation.
2019-08-16HopeArkansasTYSON FOODS INC.Finger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee raised the door to a breading machine and the machine caused an amputation to the employee's right index finger.
2019-08-07North AdamsMassachusettB&B MICRO MANUFACTURING, INC.Ankle(s)Other fall to lower level 11 to 15 feet
An employee was installing plywood on a roof. The plywood was staged on forklift forks that were raised approximately 12 feet. The employee climbed from the roof onto the forks of the forklift to retrieve the plywood. The employee was kneeling on the stack of plywood when it fell to the ground. The employee fell with the plywood approximately 12 feet onto concrete, requiring hospitalization for a fractured left ankle.
2019-07-30MiamiFloridaG.F.B. Enterprises, LLCFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was adjusting the setting points on a car lift which had a car on it. The lift raised up, trapping the employee's left index finger between the setting point of the lift and the undercarriage of the car resulting in the amputation of the left index fingertip.
2019-07-19VandaliaOhioBuilders FirstSource, LLC Ankle(s)Other fall to lower level
An employee was going to hammer protruding nails into a wall in preparation to take down shelving. The nails were more than 10 feet above the ground. The employee was standing on a wooden pallet which was raised on the forks of a forklift when the pallet failed. The employee lost balance and fell more than 10 feet to the ground. The employee sustained a broken left ankle.
2019-07-15CorriganTexasCorrigan OSB, L.L.CFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
Employees were using an overhead crane to move logs. One employee was controlling the crane with a remote control. Another employee had his right hand on top of the hoist block when the block was raised. The employee's index finger was caught between the block and a pipe resulting in a partial amputation of the right index finger.
2019-07-10Staten IslandNew YorkBank of AmericaEye(s)Fall on same level due to tripping on uneven surface
An employee was walking to her desk, tripped over a raised floor tile, and fell hitting her head on the desk. She sustained a laceration above the left eye.
2019-07-10OdessaTexasByrd Oilfield ServicesChest, except internal location of diseases or disordersStruck by object or equipment
An employee was working on a drilling rig as a pipe was being raised out of the hole. The pipe struck the employee resulting in hospitalization for broken ribs, a punctured lung, and a broken back.
2019-06-14NewtownOhioJerry Ritter Trucking, Inc.Toes(s), toenail(s)Struck by object falling from vehicle or machinery-other than vehicle part
On June 14, 2019, an employee was dumping approximately 3 tons of asphalt that was left inside the bed of a dump truck from the night before. The employee raised the dump truck and then exited the truck. While the employee was standing at the rear of the truck, the asphalt broke loose and fell onto the employee, pinning the employee between the pavement and the tailgate of the dump truck. The employee suffered burns, lacerations, broken bones, and the amputation of toes.
2019-05-25ClaypoolArizonaFreeport-McMoRan Copper & Gold Miami OperationsHand(s)Contact with hot objects or substances
An employee was changing an anode mold. The employee's right hand was caught in a pinch point when a forklift raised the hot anode mold. The employee received second and third degree burns on the right hand.
2019-05-20YonkersNew YorkELQ Industries Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
Tri-axle dump trucks were importing stone to the worksite. After one of the trucks emptied its load the injured employee noticed stone on the tail of the body where the tailgate would close. The employee notified the driver who, again, raised and lowered the bed of the tri-axle to dislodge the debris. When the bed lowered the employee's left hand was caught in a pinch point between the truck body and the tailgate resulting in amputation of the middle and ring fingertips.