DateCityStateEmployerBody PartEvent
2021-11-16HazlehurstGaHazlehurst Wood Pellets, LLCShoulder(s), including clavicle(s), scapula(e)Fall through surface or existing opening less than 6 feet
An employee completed repairs on an electric motor under a platform and was replacing the grate covering of the motor housing area. As the employee picked up and moved the grate cover, an air line was struck and cut in half. The employee attempted to shut the air off and stepped through the opening of the motor housing area. The employee fell approximately two feet, resulting in a fractured left shoulder.
2021-11-12GranbyCoU.S. Forest ServiceLower leg(s)Jack-knifed or overturned, nonroadway
An employee was driving a motorcycle around a complex. The front tire lost traction during a turn and the motorcycle fell on top of the employee, who suffered a broken tibia and fibula. He was hospitalized, requiring surgery.
2021-11-01UrbanaOhHeritage Cooperative, Inc.Ankle(s)Other fall to lower level
An employee had just cleared a clog in a drag and re-energized the motor. The employee asked another employee at the control panel to turn on the drag. When that happened, the motor malfunctioned causing the chain and pulley system to shift, striking the employee and throwing them over the guard rail to the ground below. The employee sustained a broken ankle and shoulder injury.
2021-10-19CarthageMoDyno Nobel Inc.Finger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee was troubleshooting a motorized gate when their glove was caught between the conductors of the gate's wheel, resulting in a partial amputation to the index finger.
2021-10-16SapulpaOkParagon Industries, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
Maintenance was being performed on a production line. An employee grabbed a belt on a motor pulley system with his left hand. The pulley system pulled in his hand, causing partial amputations to the little finger, ring finger, and thumb.
2021-10-15Forest ParkGaAmeriCold Logistics LLCAnkle(s)Struck or run over by rolling powered vehicle
An employee was selecting cases in the warehouse to fill an order. The employee was walking beside a motorized pallet jack using the arm control to move the pallet jack forward. The pallet jack turned toward the employee and ran into his ankle, resulting in a fracture.
2021-10-11CottondaleAlCountry Roads RV Sales & Service, L.L.C.Chest, except internal location of diseases or disordersStruck by other falling powered vehicle
An employee was working under a motor home, jacking it up to remove a part. The motor home's suspension air bag partially deflated, causing the vehicle to lower onto the employee. The employee suffered broken ribs and a collapsed lung.
2021-10-08MadillOkOklahoma Steel & Wire Co., Inc.Arm(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was cutting weld tacks on a wire drawing machine's motor hood. After the last weld tack was cut, the hood fell on the employee's right arm and broke it.
2021-10-01CorriganTxGeorgia Pacific CorporationMultiple body partsOther fall to lower level
An employee was repairing a sight glass on a water holding tank and noticed a leaking pipe that needed repair. He stepped onto a 3-inch pipe and his wrench fell, causing him to lose balance. The employee fell onto a mixer motor and landed on the floor. The employee sustained a fractured left wrist, fractured left clavicle, and five fractured ribs.
2021-09-27AugustaGaU. S. Department of ArmyThigh(s)Fall on same level while climbing stairs, steps, or curbs
While walking into a motor pool for work, an employee tripped over a curb and fell. Surgery was required to repair a broken femur.
2021-09-27OrangeTxDeep South Cleaning & RiggingAnkle(s)Other fall to lower level less than 6 feet
An employee was attempting to access the front of a third-party trailer to prepare to land a motor for a site. The employee stepped onto the passenger-side drop axle with his left foot and the drop axle was raised, causing it to roll. The employee lost footing and fell 46 inches to the ground. The employee's left ankle was fractured.
2021-09-24BangorPaMartins Creek SES-Talen Energy Corp.Lumbar regionOverexertion involving outside sources
An employee was completing housekeeping tasks and moving electrical motors when they began to develop lower back pain.
2021-09-22PickettWiRosendale Dairy, LLCBrainPedestrian vehicular incident, n.e.c.
Two employees were in a gated area of the holding pen at Rosendale Dairy replacing a motor and gearbox for a waste auger. The injured employee was struck by the hinged gate enclosing the auger pit when the fork from the skid steer did not clear the side of the gate. The gate was pushed into the enclosure, striking the injured employee on the forehead and causing him to fall backward and hit his head on the concrete wall. The employee was hospitalized for a subdural hematoma and an epidural hemat
2021-09-18AlgonquinIlBinny's Beverage DepotMultiple body partsPedestrian struck by forward-moving vehicle in roadway
An employee was crossing the road in front of a store, on the way to retrieve shopping carts from the parking lot. A motor vehicle ran her over. She suffered injuries to multiple body parts, including the back, pelvis, ribs, and a femur.
2021-09-17ClaymontDeCappelli Property ServicesFoot (feet)Fall, slip, trip
An employee climbed inside a mulch blower to kick the mulch into a mower. He slipped and his boot became stuck. The motor fractured his foot.
2021-09-08AtlantaGaJones Lang La SalleAnkle(s)Other fall to lower level
An employee was on a ladder, replacing the motor of a fan box in a classroom. He lost his balance, fell from the ladder to the carpeted concrete floor, and suffered a compound fracture to the right ankle.
2021-09-03LakewoodCoTerumo BCTHand(s) and arm(s)Direct exposure to electricity
A cooling tower fan had stopped working. The breaker feeding the fan had been turned off, and an employee was investigating the problem with the fan. The subpanel was connected to a variable-speed motor; a circuit overloaded and an arc flash burned the employee's left arm, forearm, and hand.
2021-08-27BraggsOkErvin Cable Construction, LLCFingertip(s)Machinery or equipment incident on water vehicle
Two employees were troubleshooting a pontoon boat motor. The motor began to run and the flywheel of its engine contacted an employee's right middle finger. The employee's fingertip was amputated.
2021-08-24SealyTxWalmart Distribution CenterHip(s)Pedestrian vehicular incident, n.e.c.
An employee was standing between a motorized pallet jack and an empty stack of pallets, filling an order. A forklift struck the stack of pallets, which pinched the employee against the pallet jack. The employee's hip was broken.
2021-08-23Cape FairMoCapital Paving and ConstructionMultiple body partsPedestrian struck by vehicle in work zone
A flagger was struck by motorists, suffering fractures to an ankle, a lower leg, and a neck vertebra, as well as head and arm lacerations.
2021-08-13Winter ParkFlSGL Constructors JVNonclassifiablePedestrian struck by forward-moving vehicle in work zone
Four employees were paving a road when a motor vehicle lost control, entered the lane closure, and struck the employees. One employee was treated and released, while three employees were all hospitalized for fractures.
2021-08-06AuburnMaPolar Corp.Hand(s)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee was backing up a motorized pallet jack. The employee's hand was caught and crushed between the jack and a bailer.
2021-07-21San AntonioTxService Mechanical Group, LLCShoulder(s), including clavicle(s), scapula(e)Fall, slip, trip
An employee was working on a motor condenser when he received an electrical shock, knocking him backward and resulting in a dislocated shoulder. The machine was not locked out/tagged out at the time of the incident.
2021-07-20OchelataOkWalmart, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was performing preventive maintenance on a blower motor. The belt on the pulley amputated the pad of the employee's right middle finger without bone loss.
2021-07-19Blue MoundTxCarvana LLCMultiple body partsFall on same level due to slipping
An employee was moving a motor vehicle in the company parking lot. The employee exited the vehicle, slipped on the ground that was wet from the rain, and fell between the open vehicle door and the door frame. The vehicle began to roll backward, dragging the injured employee. The employee sustained injuries to the knee, elbow and side.
2021-07-15HowellNjUnited Natural Foods IncAnkle(s)Fall or jump from and struck by same vehicle in normal operation, nonroadway
An employee was driving a motorized pallet jack. The employee leapt from the pallet jack and his ankle was crushed and fractured between it and a shelf.
2021-07-13LitchfieldIlPITTSBURGH PIPE & SUPPLY CORPLeg(s)Struck by object falling from vehicle or machinery-other than vehicle part
On 7/13/2021, around 9:00 a.m., an employee was servicing a hydraulic motor when the table that it was welded to fell 2-3 feet from a crane and struck the employee's right leg, fracturing it.
2021-07-13TulsaOkWHIRLPOOL, TULSA DIVISIONFinger(s), fingernail(s)Caught in running equipment or machinery
An employee was attempting to raise an oscillating motor when their left index, ring and little fingers became caught in the belt that rotated around the drive, resulting in an amputation of their left ring finger, including soft tissue loss.
2021-07-07UniontownOhBarberton Tree Service IncSkullStruck by swinging or slipping object, other than handheld, n.e.c.
Two employees were unclogging the chipper after a rainstorm. One employee opened an access panel to the drum of the chipper to unclog it while the second employee went to the other side of the chipper. The first employee then shut the access panel. The motor was off, but the drum was still spinning. A piece of clogged brush kicked the panel open and struck the second employee in the forehead, resulting in multiple skull fractures.
2021-07-02ClevelandOhCleveland Clinic Lutheran HospitalWrist(s)Pedestrian struck by vehicle in nonroadway area
An employee was struck by a motor vehicle while walking to their own vehicle. The employee suffered a broken wrist.
2021-06-28Ellwood CityPaSwank Construction Company, LLCMultiple body partsPedestrian struck by forward-moving vehicle in work zone
An employee was flagging in a work zone on the shoulder of a road when they were struck by a motor vehicle, resulting in fractured ankles, legs, and vertebrae.
2021-06-24SomersetNjCatalent Pharma Solutions, LLCShoulder(s), including clavicle(s), scapula(e)Jack-knifed or overturned, nonroadway
An employee was driving their motorcycle over a speed bump in the company parking lot when they fell to the ground, resulting in a fractured left shoulder.
2021-06-24LouisvilleKyDept of Veterans AffairsFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was recording data from a motor. He stepped into a hole, causing him to place his hand into the equipment that was still moving after the motor was shut off. The employee's hand was caught in the fan motor belt and pulley resulting in a partial amputation of his right index finger, including the loss of bone.
2021-06-19BerlinCtManafort Brothers IncorporatedMultiple body partsRoadway collision-moving and standing vehicle in roadway
An employee was sitting in his personal vehicle parked on the side of the road in a road construction zone. A motor vehicle traveling the wrong way on the highway drove into the construction zone and struck the employee's vehicle. The employee sustained two broken ribs and a broken leg.
2021-06-05ColumbusOhDeBra-KuempelFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was repairing the four belt blower motor of an air handling unit. The belts rotated and the employee's left index finger was caught in the unit resulting in an amputation to the finger.
2021-05-10CarlislePaVitro Architectural Glass IncorporatedHand(s) and arm(s)Caught in running equipment or machinery during maintenance, cleaning
A maintenance employee was repairing a packing machine. The employee was under the machine when it cycled. The employee's right hand and forearm were caught and crushed by the counterweight of the cullet chute and the motor housing.
2021-05-08HoustonTxNCI Group, Inc.Hand(s)Caught in running equipment or machinery
An employee was making adjustments to a limit switch located inside the slide gate electrical box. The motor actuated and his hand was caught between the chain and the sprocket. The employee sustained a laceration to the right hand that required stitches and hospitalization.
2021-05-08MiddletownOhCleveland-Cliff Steel Corp Middletown WorksFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was removing chain links on the carriage assembly of a drive motor. The carriage dropped approximately 20 feet after links were removed and pulled the employee's fingers into the chain and sprocket assembly. The employee's thumb was broken and their left pinky finger was amputated.
2021-05-06HazletonPaAutozone, Inc.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was working from a scissor lift to lubricate the chain and sprocket on a overhead conveyor's motor. The employee observed a rag in the conveyor. As the employee retrieved the rag, his right pinky finger got caught in the conveyor chain/sprocket resulting in a fingertip amputation.
2021-05-06WoodvilleWiMcMillan Electric CompanyFingertip(s)Caught in running equipment or machinery, n.e.c.
On May 6, 2021, an employee was being trained on a press. The washers on the press arm kept falling down. The machine cycled while the employee was trying to wipe the area where the washers were. The employee's finger was caught between the press arm and the motor resulting in an amputation to the left index fingertip.
2021-05-05NorthlakeTxEntech Sales & Service, LLCFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was lubricating a motor. A nearby fan belt tugged his left hand into a pulley, partially amputating the tip of his left ring finger.
2021-04-30MckinneyTxEncore Wire CorporationBrainStruck by swinging or slipping object, other than handheld, n.e.c.
An employee was removing a motor. The motor fell suddenly, swung sideways on wires it was connected to, and struck the employee's head. The employee suffered a head laceration and a concussion.
2021-04-27MckinneyTxMcCourt Equipment IncorporatedLeg(s)Struck or run over by rolling powered vehicle
An employee was replacing a drive motor on a telestacker. When he removed the motor, the telestacker started to roll downhill. One of its wheels pinned the employee, who suffered broken legs.
2021-04-26Brook ParkOhFord Motor CompanyFoot (feet)Nonroadway collision with object other than vehicle, n.e.c.
An employee was driving a motorized buggy down an aisleway in the assembly area of a plant along with a co-worker. The employee braked to turn a corner when his foot slipped off the brake and on to the accelerator pedal. The motorized buggy turned the corner and went right into a mist collector. The employee was thrown forward in the buggy and suffered multiple fractures to his left foot that required surgery.
2021-04-23WichitaKsSpirit Aerosystems IncBrainPedestrian struck by vehicle in nonroadway area
An employee was struck by a motor vehicle while walking in a facility. The employee was hospitalized.
2021-04-23LincolnNeBurger KingMultiple trunk locationsOther fall to lower level
An employee was checking the hood motor on the roof for proper function. While climbing the outside roof access ladder, the employee fell and sustained a broken pelvis, bleeding in her spleen, and a head laceration.
2021-04-22TupeloMsB & B CONCRETE COMPANY INCFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was replacing belts on an air compressor. The motor pulley rotated, grabbing the employee's fingers and pinching them between the tightened belt and the pulley. The employee suffered a severed right index finger, a lacerated right middle finger, and a broken right ring finger.
2021-04-09New YorkNyWholefoods MarketLower leg(s)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee was moving pallets out of a dairy cooler. As the employee pulled a motorized pallet jack out from under a pallet, his leg was caught between the jack and the wall. He suffered a broken fibula.
2021-04-08MarathonFlCoastal Docks, LLCMultiple body partsExplosion or fire on water vehicle
While prepping a push-boat to move to another location, employees filled both motors with 2-stroke oil and put the cowlings back on the motors. An employee went to start the motors. The port motor started but the starboard motor hesitated. The employee tried again; the starboard motor started up but fire shot out and fuel that leaked caught fire. One employee was hit by the flames, and sustained burns on the neck, left hand, and both legs.
2021-04-07CollinsvilleAlJCG Foods of Alabama LLCChest, except internal location of diseases or disordersOther fall to lower level 6 to 10 feet
An employee accessed the top of a piece of equipment from a platform and had been removing a damaged motor from the equipment. The employee fell down the side of the 8-foot high piece of equipment and struck a rail and the concrete floor. The employee was hospitalized with three broken ribs and a contusion on the side of the head.
2021-04-06LafayetteLaPrairie Contractors, LLCLeg(s)Pedestrian struck by forward-moving vehicle in work zone
An employee was putting down temporary reflectorized striping tape during milling operations. A vehicle ran through the work zone, striking a motorized boom and then striking the employee who was following behind the motorized boom. The employee sustained a broken leg.
2021-03-27HooksettNhBass Pro Shops/Cabela¿s Boating CenterFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was prepping an outboard boat motor for a customer and testing all features. The motor got stuck in the tilted position. The employee was trying to free the tilt lock when the lock freed itself and the motor struck the employee's fingers while they were in the hinge area resulting in amputation of the employee's right pinky fingertip.
2021-03-24PortageWiTrienda Holdings, L.L.C.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
Two employees were removing a broken drive chain that weighted approximately 70 lbs. from a sprocket on a bottom plate motor. The injured employee's hand slipped from the oil on the chain and their right thumb was pinched between the chain and sprocket causing a partial thumb amputation.
2021-03-23CorneliaGaFieldale Farms Processing PlantFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was sanding a shaft that went through a motor and gearbox. The shaft caught his glove, causing him to suffer an amputation of the left index finger and a broken left middle finger.
2021-03-09McdonoughGaAutosales, IncorporatedLeg(s)Nonroadway noncollision incident, n.e.c.
An employee was riding on a motorized pallet jack. The pallet jack hit him, causing a fracture and a skin tear in his leg. He was hospitalized.
2021-03-07ThomsonGaDM Conlon, Inc.Leg(s)Pedestrian struck by forward-moving vehicle in work zone
An employee was operating a motorized walk-behind wire wheel brush inside a road work barricade. A car from live traffic entered the area and hit the employee, breaking the employee's leg. The employee was hospitalized for surgery.
2021-02-24HuntsvilleAlTechnicolor Home Entertainment Services, LLCFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was changing a motor on a sorting line and correcting tension on the conveyor belt. The belt slipped and, as he was adjusting it, his right thumb was caught by the belt and pulley. The belt wrapped around his thumb, causing the amputation of the thumb tip.
2021-02-20TampaFlU.S. Department of Veterans AffairsFinger(s), fingernail(s)Caught in or compressed by equipment or objects
Two employees were conducting preventative maintenance on multiple air handling units. One employee was greasing the motor and fan bearings inside the end of a unit when his left pinky finger was caught and pinched between the belt and pulley resulting in a partial amputation of the distal phalanx.
2021-02-18RoxburyNySki Plattekill, Inc.Multiple body partsCaught in running equipment or machinery during regular operation
An employee was entering the motor room vault at the top of a ski lift. The employee became entangled in conveyor equipment that transported riders to the snow-tubing lanes. The employee suffered multiple fractures to the face and left arm.
2021-02-17JoplinMoDarlington SnacksFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was changing a belt on a blower motor. The machinery started and the pulley pulled in the employee's right glove. The employee was injured and underwent a surgical amputation of the right ring finger.
2021-02-14Terre HauteInFederal Corrections Complex Terre HauteFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was doing preventive maintenance on a cook pot. He had greased the motor shaft and was about to clean off the fitting when a set screw pinched his right index finger between the shaft and the grease fitting. He suffered a laceration and an open fracture to the fingertip.
2021-02-09LondonOhArmaly LLCFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was fixing a jam in a conveyor when the motor was started and the employee's fingers were caught in the motor chain, resulting in amputation of two fingers and hospitalization. The motor guard was removed at the time of the incident.
2021-02-05HoustonTx84 Lumber CompanyFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was about to begin repairs to the belt and pulley system of a table saw motor when the machine started and amputated two fingers on their right hand.
2021-02-02HuntsvilleTxA Brush Above Services, LLCThigh(s)Pedestrian struck by vehicle in nonroadway area
An employee was struck by a motor vehicle at a construction site. The employee was hospitalized with a broken femur.
2021-02-02MarkesanWiDel Monte Foods, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was manually rotating a 4-foot-wide grater drum (without its drive chain and motor attached) to do maintenance. The employee's right little finger was pinched between the bar and another part, causing an amputation to the finger.
2021-01-27LulaGaswipejobs, Inc.Toes(s), toenail(s)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee was driving a motorized pallet jack out of the freezer when he lost control. His right foot slipped, striking a pole and fracturing toes.
2021-01-25Saint LouisMoJOST CHEMICAL COMPANY, INC.ScalpFall through surface or existing opening 6 to 10 feet
An employee was performing maintenance on a motor line and fell through a hole, approximately 8 feet, to the surface below striking their head and losing consciousness. The employee suffered a contusion to the back of the head and was hospitalized.
2021-01-18Fort SmithArOK FoodsForearm(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was using a motor-driven lift to raise a tank of chicken to dump into another machine. The chain being turned by the motor misfed and stopped the lift, causing the motor to shake and loosen the bolts that anchored it to its housing. The employee lowered the tank, reset it on the lift, and began to raise it again when the motor fell approximately 10 feet from its housing and struck the employee's right forearm, resulting in a fracture and laceration.
2021-01-13DallasTxXPO LOGISTICS FREIGHT, INC.Multiple body partsStruck by object falling from vehicle or machinery-other than vehicle part
An employee was removing the straps from a crate (containing a boat motor) on a trailer. When the straps were removed, the crate fell onto the employee and broke his right leg and jaw.
2021-01-11Lake MaryFlU.S. Postal ServiceAbdomen, except internal location of diseases or disordersRan off driving surface, nonroadway
On January 11, 2021, an employee was driving a tow motor when it went off the side of a truck. The employee was pinned between the truck and a compactor, suffered a spleen injury, and was hospitalized.
2020-10-19CumberlandWiSENECA FOODS CORPORATION - VEGETABLE DIVISIONHand(s) and arm(s)Contact with hot objects or substances
A conveyor belt on the green bean line was slipping due to some icing on the drive motor. An employee went over to start it manually. While tugging on the belt, the employee's hand got pulled into the underside of the conveyor. The employee sustained third degree burns on his left arm and hand requiring skin grafts.
2020-10-14WakeeneyKsMpire Improvements LLCFinger(s), fingernail(s)Caught in running equipment or machinery, n.e.c.
An employee was working from a scissor lift, programming transmitters for the drive motor of an overhead door. The remote transmitter in his sweatshirt pocket activated the motor. His left index finger was caught in the exposed chains and sprockets, and was amputated at the distal joint.
2020-10-09JacksonMsLKQ KeystoneFinger(s), fingernail(s)Struck by falling object or equipment
An employee was unloading motors when a pallet shifted and a motor fell and amputated the employee's finger.
2020-10-05MidlandTxThru Tubing Solutions-Downhole Tools & ServiceFingertip(s)Struck by falling object or equipment
Employees were disconnecting a motor tool with a pipe wrench. The pipe fell approximately 6 inches, pinning an employee's finger between the motor tool and the hand rails. The right pinky fingertip was amputated.
2020-10-02RockfordIlAccuride Corp.Fingertip(s)Compressed or pinched by shifting objects or equipment
An employee went to manually move a pallet on a non-motorized conveyor because it was not moving. Another pallet began to roll forward and struck the employee's left middle finger. The fingertip was amputated.
2020-10-02GainesvilleFlDAB CONSTUCTORS, INC.Multiple body partsPedestrian struck by vehicle in work zone
On October 2, 2020, an employee was struck by a motor grader while shoveling windrow. The employee sustained fractures to the right arm, right foot, and ribs.
2020-09-30DecaturIlADM Bio ProductsFingertip(s)Compressed or pinched by shifting objects or equipment
On September 30, 2020, an employee had just replaced a motor and belts for an aspirator fan blower motor. After tensioning the belt, the employee was rotating the assembly sheave to confirm the belt was properly seated. The employee's right index finger was caught between the belt and the sheave and the fingertip was amputated.
2020-09-29StuttgartArRiceland Foods, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was troubleshooting a bean huller when their right thumb was amputated above the first knuckle by the motor of the bean huller cyclone.
2020-09-24HoustonTxGrant Sheet Metal, Inc.Multiple body partsPedestrian struck by vehicle in work zone
Two employees were working as flaggers for a construction site and were assisting a truck driver back out of the site. As the truck was backing out onto the service road, a motorist struck one of the flaggers who was in the street. The employee received head and bodily injuries. The employee was hospitalized for surgery.
2020-09-22EastonCtAquarion Water CompanySkullFall or jump from vehicle in normal operation, nonroadway
An employee was riding in the bed of a company pickup truck stabilizing the motor that was being brought over to the dumpster for disposal. When the truck came to a stop, the employee lost his footing and fell out of the truck bed on the driver's side and struck the back of his head on the driveway pavement. The employee suffered a laceration to the back of the head and a skull fracture.
2020-09-07ArkadelphiaArSiplast Inc - Roll Roofing FacilityMultiple body partsContact with hot objects or substances
A maintenance technician was troubleshooting a heat transfer fluid (HTF) motor failure on the production line. While the motor was being removed, the technician was sprayed with hot HTF, resulting in burns to the hands, arms, and torso.
2020-09-03CochrantonPaVitro Flat Glass, LLCFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was performing maintenance work to change/inspect a belt on a blower motor. The employee was removing/inspecting the v-belt from a motor/fan drive sheave and as he was rolling the belt off the sheave his left ring finger got caught between the belt and the sheave resulting in a fingertip amputation.
2020-08-31LongviewTxDG Distribution of Texas LLCAnkle(s)Collision between a moving and standing vehicle, nonroadway
An employee was driving a motorized pallet jack. The jack struck a stopped maintenance cart, and the employee's left ankle was crushed.
2020-08-31OshkoshWiWestgate CupsFinger(s), fingernail(s)Struck against moving part of machinery or equipment
An employee was operating a machine that worked with extruded plastic. The grinder attached to the machine became clogged and the employee stopped the machine to unclog the grinder. As he was clearing the jam, the grinder motor was still winding down and the still rotating blades inside the equipment amputated multiple fingers.
2020-08-31HoustonTxGrocery Company Supply, Inc.Finger(s), fingernail(s)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee was turning a motorized pallet jack. The employee's left hand came into contact with steel shelving, which severed the employee's left little finger. The employee was hospitalized.
2020-08-25WinonaMsAnel CorporationFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was replacing a belt on a motor. The motor started and the employee's right middle fingertip was pinched between the belt and a pulley. The fingertip was amputated.
2020-08-24FairlawnOhThe Village of St. EdwardBODY SYSTEMSDirect exposure to electricity, greater than 220 volts
An employee was changing out the capacitor on the blower motor of a heat pump. After the swap out, he turned the power back on, but the blower motor was not working. He reached under the unit and disconnected the 277-volt power. The employee was then electrocuted and dropped to the floor.
2020-08-22JacksonvilleFlPRIME COMMUNICATIONS, L.P.Abdomen, except internal location of diseases or disordersPedestrian struck by vehicle in nonroadway area
An employee was helping a customer inside the store when a motorist outside lost control of her vehicle, crashed through the store wall, and struck the employee. He was hospitalized with a lacerated liver.
2020-08-20New BostonOhOSCO Industries Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was getting ready to switch out a motor on a piece of foundry equipment. The motor shifted, crushing the employee's left ring finger against its metal frame and causing a partial amputation to the finger.
2020-08-14HolcombKsTyson Fresh MeatsFingertip(s)Fall on same level due to tripping over an object
An employee was carrying an electric motor that weighed 35lbs. and had to use four sets of stairs to reach the area where the motor was to be installed. After coming down the third set of steps, he was on a flat surface when he tripped over an air wand hose that was on the ground. The motor he was carrying came down on his right ring finger, causing an amputation of the soft tissue of the right ring fingertip.
2020-08-05JacksonAlPACKAGING CORPORATION OF AMERICAMultiple body partsDirect exposure to electricity
An employee was checking the voltage on the power source to a chipper motor. The meter blew up, causing an arc flash that burned the employee's neck, face, and hands.
2020-08-03ColumbiaMoHarbor Freight Tools Store 242Lower leg(s)Fall on same level due to tripping over an object
An employee was transferring products from a pallet to a non-motorized conveyor belt. While walking around the pallet, she tripped on one of its corners and fell to the ground, breaking her lower left leg.
2020-07-11ExtonPennsylvaniaDSM BiomedicalFinger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee was servicing an exhaust fan motor. The fan suddenly began to turn, and the employee's thumb was pulled into the pulley and amputated.
2020-07-07WaynesboroGeorgiaSouthern CompanyFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was changing the motor and motor sheath of an HVAC unit. As the motor was rotated, his right ring finger was caught between its belt and pulley. The finger was amputated above the first knuckle.
2020-07-03OmahaNebraskaChesterman CompanyFoot (feet)Pedestrian struck by vehicle in nonroadway area
A motorized pallet jack struck an employee's foot, breaking it.
2020-06-26Port BolivarTexasCallan Marine LTD.Fingertip(s)Machinery or equipment incident on water vehicle
An employee was removing an air breather off of a boat motor when the engine's turbo pulled the employee's finger into the engine rotor blade, resulting in a right index fingertip amputation.
2020-06-25DawsonvilleGeorgiaTyson Poultry, Inc.Multiple body partsPedestrian struck by vehicle in nonroadway area
A Tyson Poultry commercial motor vehicle driver was struck from behind by an empty cage being carried on a three-wheel forklift. The driver suffered lacerations to the right elbow and the top of the left hand, a compound fracture to the right tibia and fibula, fractures to three lower-back vertebrae, and body abrasions.
2020-06-24LoganOhioShelly and SandsNonclassifiablePedestrian struck by forward-moving vehicle in work zone
An employee was working as a flagger on a highway project. While directing northbound traffic, he was struck by a motorist heading northbound. The employee was hospitalized.
2020-06-18RomeNew YorkFamily Dollar Distribution CenterBrainFall or jump from vehicle in normal operation, nonroadway
An employee fell off a motorized pallet jack and hit her head on the ground, suffering a concussion and requiring hospitalization.
2020-06-14Cle ElumWashingtonU.S. Forest Service, Cle Elum Ranger DistrictUpper and lower limb(s)Fall or jump from vehicle in normal operation, nonroadway
An employee was riding a motorcycle on a trail when the front tire hit a rock and the employee was thrown from the motorcycle. The employee sustained a broken leg and a broken wrist.