DateCityStateEmployerBody PartEvent
2021-08-06ColumbusOhCoulter Ventures, LLCFingertip(s)Caught in or compressed by equipment or objects
An employee was moving a chain on a laser CNC machine. When he pulled the chain toward the sprocket, his left ring finger was caught in the nip point of the chain/socket assembly. He suffered a partial amputation to the fingertip.
2021-08-03Beaver DamWiMetalcraft of Mayville, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
At about 7:00 p.m. on August 3, 2021, an employee was removing laser-cut parts from a sheet of steel that was positioned on a conveyor belt. A magnetic hoist was being used to lift a part from the sheet when the magnet momentarily lifted the metal conveyor belt from the frame of the conveyor. The employee's hand was resting on the conveyor frame, and when the conveyor belt separated from the magnet it fell onto the employee's hand, partially amputating a finger.
2021-06-15DecaturIlKing-Lar CompanyNonclassifiableFall through surface or existing opening 11 to 15 feet
On June 14, 2021, an employee was setting up a lasering system at a newly constructed commercial building. While anchoring or aligning a frame over a 20-foot by 22-foot floor opening, the employee fell through, landing 10-12 feet below. The employee suffered a cracked vertebra and was hospitalized.
2021-02-22TuscumbiaAlLoram Technologies, Inc.Chest, except internal location of diseases or disordersStruck by powered vehicle-nontransport
An employee was calibrating equipment in a hotel parking lot. The equipment had radiation and laser equipment that deployed from the back of a truck and rotated down. The employee was crushed between the hood and the bumper of the truck, suffering chest injuries. The employee was hospitalized.
2020-09-02NeenahWiBent Tubes LLCFingertip(s)Fall on same level due to slipping
An employee was leaning over the laser sensors using his finger to check that a part was not rotating in the pipe bending machine when he slipped and fell into the clamp on the machine. The employee's right index fingertip was amputated.
2020-06-24BensalemPennsylvaniaNational Refrigeration & A/C ProductsFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was removing cut sections of sheet metal from the laser conveyor. One of the sheets moved forward, pinning his finger against the opposite side. The employee sustained a right middle fingertip amputation.
2020-04-27ClevelandOhioCLEVELAND CLINIC FOUNDATIONFingertip(s)Struck by rolling object or equipment being pushed by injured worker
An employee was moving a surgical laser machine to a different location when the fingers of his right hand were caught and crushed between the machine and a door frame, resulting in the surgical amputation of his right small fingertip.
2020-01-09ColumbiaMissouriForTech MedicalHip(s)Fall on same level due to tripping over an object
An employee was unloading a laser machine onto a cart when wind blew fibers off the machine/cart. The employee pressed the brake on the cart, retrieved the fibers, and took them inside the building. When the employee returned for the cart, it was rolling toward cars in the parking lot. The employee chased the cart and ran into a concrete barrier and fell, suffering a fractured right hip and right elbow injury.
2019-09-09Winter ParkFloridaGENICON, INC.BODY SYSTEMSInhalation of harmful substance-single episode
An employee was using a laser cutter to cut polyurethane when she felt sick and had difficulty breathing. She was hospitalized with carbon monoxide poisoning.
2019-05-28North HavenConnecticutCOVIDIEN LIMITED PARTNERSHIPFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was troubleshooting a testing machine and cleaning the laser. The machine has a rotating table above a hole where the laser shines through. The employee's left middle finger was caught between the edge of the hole opening and the rotating table when the machine was activated resulting in a fingertip amputation.
2019-04-04BerlinConnecticutOkay Industries, Inc.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was working on an automation assembly laser machine when parts moved unexpectedly. The employee's finger was caught in the machine as it advanced, and he suffered a broken bone and a partial fingertip amputation requiring surgery. The machine was not locked out at the time.
2019-03-08CincinnatiOhioFortec Medical, Inc.Toes(s), toenail(s)Struck by falling object or equipment
An employee was installing a counterweight on a laser machine when it dropped onto the employee's toe. The employee suffered bruising and cuts.
2019-03-06AustinTexasForTec Medical, Inc.Abdomen, except internal location of diseases or disordersStruck by object or equipment dropped by injured worker
An employee was loading a medical laser when it fell onto his stomach, causing an umbilical hernia.
2019-02-05NorcrossGeorgiaJoseph T. Ryerson & Son, Inc.Abdomen, except internal location of diseases or disordersCaught in running equipment or machinery during maintenance, cleaning
A maintenance employee was making adjustments to the measurements on a tube laser. The employee was inside the inter-lock doors when the machine started up. The employee was struck in the torso by the machine arm and suffered ruptured intestines and internal bleeding.
2019-01-23MentorOhioTrailer Component Manufacturing IncFingertip(s)Compressed or pinched by shifting objects or equipment
On January 23, 2019, a temporary employee was operating laser cutting equipment. As the employee lifted a part out of the laser nest with a magnetic lift and chain hoist, one of the employee's fingers got stuck between the part and the laser nest. The fingertip was amputated.
2018-08-28AttapulgusGeorgiaBASF CorporationFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was using a laser to align two pulleys. As he moved from being on one knee to standing, he placed his left hand on a free-wheeling V-belt near the pulley. The belt moved and pinched his finger in an upper nip point at the pulley, resulting in a partial amputation of the left index finger.
2018-08-16Punta GordaFloridaManhattan Road & Bridge Lower leg(s)Fall on same level due to tripping over an object
An employee went to step onto the top of an H-pile (metal beam) to get a laser level from the other side when his foot was caught on an extension cord, causing him to fall onto the pile. The H-pile deeply lacerated his lower left leg.
2018-08-15TrentonIllinoisKMK Metal Fabricators, IncArm(s)Caught in or compressed by equipment or objects
An employee was cleaning debris around a laser cutting table with an air hose when the table shifted and he was caught between the bracket arm of the cutting device and a portion of the table. He suffered a laceration and fractured arm, requiring hospitalization.
2018-05-10BuffaloNew YorkBuffalo Outfront Metalworks, L.P.Back, including spine, spinal cordFall, slip, trip
An employee was troubleshooting a laser cutting table when it indexed/articulated and knocked him to the floor. He suffered a back injury.
2018-02-28Rock FallsIllinoisTHE IFH GROUP, INC.BrainStruck by object or equipment
On 2/28/2018, an employee was helping an operator manually load a laser machine with metal material when the material struck and injured the employee's head, requiring hospitalization.
2018-02-05MaconGeorgiaKumho Tire Georgia, Inc.Lower leg(s)Caught in or compressed by equipment or objects
An employee was moving laser guided vehicles (LGV) due to a jam up. One was in manual when another came up in auto. The employee kicked the sensor to stop the LGV in auto. The LGV reset after 15 seconds and started up again, trapping the employee between the two LGVs. The employee was hospitalized with a laceration and avulsion to the right calf.
2017-10-11DallasPennsylvaniaPennmark Technologies CorporationFingertip(s)Caught in running equipment or machinery during regular operation
On October 11, 2017, at approximately 9:10 PM, an employee was operating a press brake (equipped with laser guard) to bend a metal part when his right index fingertip was pinched and amputated between the part and the machine.
2017-09-25SidneyOhioLaserFab Technologies, IncFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating the laser cutting machine and amputated the right pinky finger.
2017-08-17EnnisTexasTamko Building ProductsHip(s)Compressed or pinched by shifting objects or equipment
An employee was operating a laser guided vehicle (LGV). The employee put the LGV in manual, got off the machine and was pinched between the LGV and conveyor, suffering a right hip contusion.
2017-07-28New BremenOhioThieman Quality Metal Fab, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
On July 28, 2017, an employee was removing metal parts from the laser table and stacking them on a skid. As the employee placed a part (approximately 100 lbs.) on the skid, the left middle finger was pinched between two parts resulting in a distal amputation of the finger.
2017-04-10SkokieIllinoisElettric 80 IncToes(s), toenail(s)Struck by object falling from vehicle or machinery-other than vehicle part
Employees were removing a gearbox from the frame of a laser-guided truck. After removing the last two bolts holding the gearbox to the frame, the gearbox fell and struck the employees' feet. Both employees suffered five broken toes.
2016-08-16West JeffersonOhioJefferson Industries CorporationThigh(s)Caught in running equipment or machinery during maintenance, cleaning
On August 16, 2016, at approximately 10:59 p.m., an employee was attempting to fix a sensor inside the enclosure of a laser weld cell. While the employee was inside the enclosure, a carrier that moved parts into the welding machine moved and struck the employee in the left leg, puncturing the left thigh.
2016-08-10EnglewoodColoradoAdvanced Storage ProductsHip(s)Fall on same level due to slipping
An employee was taking laser measurements at a client facility in the freezer area. There was a roof leak and patches of black ice on the floor. The employee slipped on the ice and fell to the floor, sustaining a hairline fracture to his right hip and injuring his right arm. He was hospitalized.
2015-12-21Grand ForksNorth DakotaCustom DrywallChest, except internal location of diseases or disordersFall through surface or existing opening 26 to 30 feet
An employee fell approximately 30 feet through an elevator shaft after unhooking his self-retracting lifeline to readjust a laser resulting in fractured ribs, pelvis and a punctured lung.
2015-06-30FloraIllinoisTHE GSI GROUP, INC.Lower leg(s)Struck by object or equipment, n.e.c.
An employee was troubleshooting a sensor on a pallet table for a laser machine. The table moved and struck the employee breaking the employee's lower leg.
2015-06-21BrownwoodTexasKOHLER COMPANYHip(s)Fall on same level due to tripping over an object
An employee was walking around the laser control when he tripped on the corner of the pallet and fractured his hip, requiring hospitalization.