DateCityStateEmployerBody PartEvent
2021-11-04San AntonioTxVT San Antonio Aerospace, Inc.Fingertip(s)Compressed or pinched by shifting objects or equipment
An employee was aligning a brace on the landing gear of an airplane to bolt into place. The brace was moved and his right middle finger was caught in the bolt hole. The fingertip was medically amputated.
2021-10-23MedleyFlEco Glass Production Inc.Arm(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was troubleshooting a glass washer. To test the machine, the employee placed glass at the entrance to the washer. The pinion gear caught his jacket and the machine partially amputated his left arm. The machine was not locked out/tagged out at the time.
2021-10-08ChicagoIlKloeckner Metals CorporationShoulder(s), including clavicle(s), scapula(e)Struck by dislodged flying object, particle
An employee was using a hand-held pneumatic grinder to do a vertical grind of a metal gear rack when the griding disc flew off and hit the employee's left shoulder, resulting in a laceration that required hospitalization.
2021-09-30ChiltonWiBriess Industries IncFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was installing a new gear in a hand-operated flake mill and trying to line up the gear with a worm screw shaft approximately 18 inches long and weighing 30 pounds. The employee's left thumb was pinched between the shaft and the gear, resulting in a fingertip amputation.
2021-09-22PickettWiRosendale Dairy, LLCBrainPedestrian vehicular incident, n.e.c.
Two employees were in a gated area of the holding pen at Rosendale Dairy replacing a motor and gearbox for a waste auger. The injured employee was struck by the hinged gate enclosing the auger pit when the fork from the skid steer did not clear the side of the gate. The gate was pushed into the enclosure, striking the injured employee on the forehead and causing him to fall backward and hit his head on the concrete wall. The employee was hospitalized for a subdural hematoma and an epidural hemat
2021-09-18ShreveportLaCALUMET SPECIALTY PRODUCTS PARTNERS, L.P.Multiple body partsStruck by object or equipment
An employee was responding to a seal leak on a crude pump when a nearby switchgear arced, causing a pressure wave to knock him to the ground. The employee sustained multiple lacerations to his face and hands.
2021-09-13JanesvilleWiVan Brocklin Electric, LLCMultiple arm locationsDirect exposure to electricity
An employee was testing a just-installed electrical switchgear. While the employee was testing a fuse, an electrical arc burned the employee's right arm and forearm.
2021-09-07Bay ShoreNyTForce FreightFaceStruck by swinging or slipping object, other than handheld, n.e.c.
An employee was lowering the landing gear of a trailer. The crankshaft lacerated the employee's face.
2021-08-18TamaracFlDURHAM ELECTRIC, INC.Leg(s)Struck by falling object or equipment
At 2:12 p.m. on August 18, 2021, an employee was demolishing electrical switches when the gear fell on him as it was being lowered. The employee's left leg was broken.
2021-08-12LongviewTxJoy Global Longview Operations LLC.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was using a hoist to place gears in a pallet box. After setting a gear down on the pallet, the employee unhooked the chain sling and was moving the gear into the box by hand; the gear slid toward him and pinched his right ring finger against the box causing an avulsion injury.
2021-07-24LynnMaGeneral Electric AviationArm(s)Direct exposure to electricity, greater than 220 volts
An employee was cleaning the contacts of the tie bar inside a 480V switchgear and suffered burns from an arc flash. The employee received third degree burns to his arm and first degree burns to his face.
2021-07-20ClintonMsElectro-Mech, Inc.Neck and backDirect exposure to electricity
An employee was working in an isolated, de-energized section of a switch gear. The metal wall on one side of the section made contact with an energized terminal. In the resulting arc flash, the employee suffered burns to the upper back and neck.
2021-06-29DallasTxFerrie Franzmann Industries, LLCNonclassifiableDirect exposure to electricity, greater than 220 volts
Two employees were preparing to install new circuit breakers in medium-voltage switchgear. While testing for electrical power in the switchgear, an arc flash occurred. Both employees sustained electrical burns.
2021-06-29CoffeyvilleKsCSE EnterprisesHand(s)Direct exposure to electricity
An employee was installing capacitor wires for switchgear and checking the wire length. During this process, the employee's hand contacted one of the vertical busbars, resulting in a severe electrical burn between their right thumb and index finger that required hospitalization.
2021-06-28SwedesboroNjThomas Foods InternationalFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was servicing a box machine. While wiping the gears with a paper towel, the employee was caught by the machine, resulting in partial amputations to their left middle and index fingers.
2021-06-24JanesvilleWiSiny Corp.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was operating a carding machine when their hand was caught in moving gears within the machine, resulting in the amputation of two fingertips.
2021-06-23WaldenNyProAmpacFingertip(s)Struck against moving part of machinery or equipment
An employee was removing a piece of debris from a paste pad when their right little finger contacted moving agitator gear, resulting in a fingertip amputation.
2021-06-17Lake AlfredFlMizkan America, Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee had just finished cleaning a gear box leak. As he turned the machine back on, the chain grabbed a napkin in his right hand and pulled his index finger into the chain and sprocket. He suffered an amputation to the fingertip.
2021-06-14LewistonIdFederal Cartridge CompanyFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was troubleshooting a slug cutter machine. The employee was wiping grease off of gears to inspect them when their fingertip got pulled through two gears. The fingertip was amputated at the nailbed.
2021-06-14NeenahWiBayland Transport Inc.Jaw, chinStruck by swinging or slipping object, other than handheld, n.e.c.
An employee was attaching a trailer to a semi truck. While the employee was raising the dollies using the landing gear crank, it became difficult to crank. The employee bent down to see if the dolly legs were coming up when the tension in the crank caused it to come back and hit the employee in the face. The employee suffered a broken jaw.
2021-06-04FlorenceAlThacker Casket Manufacturing, Inc.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was changing out floor paper under a chain conveyor inside a topcoat cure oven. His left middle finger was pulled into a pinch point between the conveyor's chain and a gear. The skin of the fingertip was degloved, and the fingertip was medically amputated at the first joint.
2021-05-30MehoopanyPaProcter & Gamble Paper Products CoFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was replacing a gearbox on a palletizer when the tip of his right ring finger was caught in the chain/sprocket assembly causing a partial amputation.
2021-05-28ElizabethNjMaher Terminals LLCChest, except internal location of diseases or disordersStruck by swinging or slipping object, other than handheld, n.e.c.
A shipping yard laborer had just helped a straddle carrier operator connect lifting gear to a flat rack's arms. The straddle carrier was lifting the arm when the flat rack slid toward the yard laborer and pinned him against the bumper of the straddle. The laborer suffered a broken sternum.
2021-05-17LubbockTxGoodwill Industries of Northwest TexasHand(s) and arm(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was servicing a conveyor belt. After greasing the ports and gears, the employee restored energy to the machine. The employee's left hand was then caught between the bottom belt and the pressure roller. The employee suffered a fracture and a tendon injury to the left little finger and a forearm burn.
2021-05-13Fort WorthTxTension Envelope CorporationFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was investigating a noise coming from a guarded gearbox on the backside of his machine. He was moving a loose grease line when his finger slipped into the chain and sprocket located in the box resulting in a partial amputation of the left index finger.
2021-05-07NormanOkSouthwestern Wire, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee had been running a weave machine which makes chain link. The employee made an adjustment by tightening a chain to a gear and then went to lunch. Upon returning from lunch, he turned on the machine and noticed the guard on the back of the machine was on the floor. The employee picked up the guard to put it back in place. The gear pulled in his gloved left hand and amputated the pads of the two middle fingers.
2021-05-04KankakeeIlDel Monte Fresh Produce CompanyFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
A temporary employee was removing pineapple skins that were stuck in the pineapple corer machine. When the skins were removed, the machine started up and pulled the employee's right index finger into the gears, resulting in a fingertip amputation.
2021-04-23HaleyvilleAlIndustrial Services-Haleyville, Inc.Multiple body partsDirect exposure to electricity, greater than 220 volts
An employee was removing a switchgear metal cover panel. A tool fell into the switchgear compartment and contacted a 480-volt bus, resulting in an arc flash that caused second degree burns to the employee's face and arms.
2021-04-20MontpelierOhWinzeler Stamping CompanyFinger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee operating a transfer press was manually moving a press ram when their left hand slipped off the flywheel onto the top of a gear. The employee's third and fourth fingers became caught in the gear, resulting in an amputation to their fourth finger.
2021-03-24AlbanyGaACTION ELECTRIC CO., INC.Hand(s)Direct exposure to electricity
An employee was working on an electrical switchgear with two other employees. The switchgear was energized and an arc flash caused third degree burns to the employee's hand. The hand was surgically amputated.
2021-03-23CorneliaGaFieldale Farms Processing PlantFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was sanding a shaft that went through a motor and gearbox. The shaft caught his glove, causing him to suffer an amputation of the left index finger and a broken left middle finger.
2021-03-19AllentownPaUnited Rentals, Inc.Hip(s)Other fall to lower level less than 6 feet
An employee was transferring gear from one truck to another when he fell off a truck step. He landed on the ground and suffered a broken right hip.
2021-03-12OmahaNeWerner EnterprisesLeg(s)Pedestrian struck by vehicle in nonroadway area
An employee was greasing the fifth wheel of a truck between the drive tires on the passenger side when the truck went into gear and rolled over the employee's left leg.
2021-03-02Saint LouisMoAPEX METAL FINISHING COMPANYFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was using a rag to apply grease to a gear sprocket and chain on a barrel tumbler. The rag and his glove were pulled into the sprocket and chain, resulting in two finger amputations. The machine was running at the time of the incident.
2021-02-10DallasTxTaylor Farms Texas, Inc.Hand(s) and finger(s)Caught in running equipment or machinery during regular operation
An employee was drying a conveyor belt when her hand got caught on the gears underneath. She sustained lacerations to the hand and fingers.
2021-02-09Grand PrairieTxFruit of the EarthFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee opened an access door to adjust the tension on a belt for a bag sealer machine. During that task, the access door strut failed and he attempted to tighten the door strut bolt with a wrench. The employee's hand slipped from the wrench and the tip of his right ring finger came into contact with the belt gears located just below the door strut, resulting in an open fracture and amputation.
2021-02-06OrlandoFlTAW, Inc.- Technical Field ServicesHand(s) and arm(s)Direct exposure to electricity
On February 6, 2021, an employee was performing switchgear preventive maintenance and removing a panel when a live electrical component came into contact with their skin, creating an arc flash that resulted in second degree burns to their right hand and forearm.
2021-02-04AllentownPathyssenkrupp Elevator CorpFingertip(s)Caught in or compressed by equipment or objects
An employee was disassembling a gearless machine when their left ring finger was pinched by the machine block, resulting in a fingertip amputation.
2021-02-01WichitaKsPratt IndustriesFingertip(s)Compressed or pinched by shifting objects or equipment
The injured employee was manually moving a belt into position on a four belt gear pulley. The machine was locked out at the time. While walking belt #1 over onto the pulley where belt #2 had broken off, the injured employee had a co-worker manually rotate the shaft on the other side of the machine to help walk the belt into position. The injured employee was pulling up on the belt with his right hand and was using a screwdriver with his left hand to move the belt. The rotating shaft then reverse
2021-01-19Bedford ParkIlUnited States Postal ServiceFinger(s), fingernail(s)Other fall to lower level
On January 19, 2021, an employee fell from a ladder. The employee's right hand fell into the moving gear of a machine, resulting in the amputation of the ring and little fingers.
2021-01-13Ocean SpringsMsR F Ederer Co IncFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was oiling a sprocket gear when the tip of the oil can got caught in the sprocket, pulling the employee's hand into the sprocket and resulting in lacerations to two fingers.
2020-10-16LawrencevilleGaABF Freight System Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was hooking up two 28-foot freight trailers. His left hand was caught between a trailer and the converter gear, and he suffered lacerations and a broken middle finger.
2020-10-09BraintreeMaWollaston AlloysFingertip(s)Caught in or compressed by equipment or objects
An employee was attempting to line up machined holes in a repaired gear box assembly's base plate to bolt it into the gear box cabinet. The gear box assembly was being raised into position and the employee was correcting the alignment when the gear box assembly shifted and caught his right hand between the upper interior cabinet and the gear box assembly resulting in amputation of the ring and middle fingertips.
2020-10-06WylieTxFarmers Electric Cooperative, Inc.Hand(s)Direct exposure to electricity
An employee was closing a switchgear in an underground residential distribution primary when an arc flash occurred and caused third degree burns to the employee's hands.
2020-10-03AshlandAlKOCH FOODSFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was performing maintenance on the box machine when his left hand was caught between two gears in the machine resulting in amputation of the third and fourth digits.
2020-09-16West AllisWiHM Graphics, LLCFingertip(s)Caught in running equipment or machinery during regular operation
An employee was adjusting a stitcher machine when their gloves were caught in a gear and chain. The employee's fingertip was amputated.
2020-09-14TroyNyHARRISON & BURROWES BRIDGE CONSTRUCTORS, INC.BODY SYSTEMSStings and venomous bites
An employee was stung by an insect while putting on gear to start welding and was hospitalized.
2020-09-09AmarilloTxAmarillo Gear Company LLCFinger(s), fingernail(s)Struck by falling object or equipment
An employee was using a magnet to flip a gear when the magnet disengaged from the part and fell on the employee's hand causing three broken fingers. The employee was hospitalized.
2020-09-05OrlandoFlBuchanan Hauling & Rigging, Inc.Fingertip(s)Compressed or pinched by shifting objects or equipment
An employee was adjusting the height of the landing gear leg on a trailer. The employee's left index finger was inside the pin hole when the leg slipped, amputating the fingertip.
2020-09-02Colorado SpringsCoRuss Electric, Inc.Multiple body partsDirect exposure to electricity, greater than 220 volts
An employee was performing preventative maintenance on a medium volt switchgear. The employee began to wipe the area with a rag and sustained an electric shock (13,800 volts) to the left arm. The employee was hospitalized and has second degree burns on six percent of their body.
2020-08-26WilmingtonDeIKO Industries Ltd.Fingertip(s)Caught in running equipment or machinery during regular operation
At 9:30 a.m. on August 26, 2020, an employee was cutting off fiberglass material that had wrapped around a roller on a production line. A chain and gear caught the employee's gloved-hand, causing a 3-millimeter fingertip amputation.
2020-08-20South PlainfieldNjRonpak, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery
An employee was removing paper from a paper bag machine. The gears in the bundler amputated the employee's right index finger at the knuckle.
2020-08-20Tinker AfbOkU.S. Department of Defense, Tinker AFBHip(s)Fall or jump curtailed by personal fall arrest system
An employee climbed onto the wing of a B-52 aircraft from an aerial lift to begin preparations for priming. The employee slid off the wing to the floor approximately 7 feet below. The employee landed on his knees then hit his head on the rear landing gear tire that resulted in an injury requiring stitches. The employee also sustained a possible fractured hip. The employee was wearing fall protection at the time.
2020-08-04CalexicoCaU.S. Customs & Border ProtectionHeartExposure to environmental heat
On August 4, 2020, at approximately 4:20 PM, an employee was walking outside between work stations in extreme heat. The employee had his duty gear on and was carrying a backpack with first responder gear when he collapsed. The employee had a heart attack and was hospitalized.
2020-07-21MckinneyTexasPCI Utilities LLCMultiple body partsDirect exposure to electricity
An employee was pushing electrical wire through an underground conduit. The electrical wire arc-flashed with a switch gear and the employee sustained burns to the hands and face.
2020-07-20OakdalePennsylvaniaPrion Manufacturing, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating a screw machine when the gears caused an amputation to three fingers on their left hand.
2020-07-01Deerfield BeachFloridaLIST INDUSTRIES, INC.Finger(s), fingernail(s)Caught in running equipment or machinery, n.e.c.
An employee was resetting a punch press. As the employee finished resetting the press, he tripped and his right middle finger was caught in a gear mechanism and crushed.
2020-06-26Carol StreamIllinoisAmerican Litho, IncorporatedFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was setting timing on the inline section of a printing machine, which had been removed from service and was in a maintenance shop. The employee's right little finger was caught in the timing gear and amputated.
2020-06-25Chicago HeightsIllinoisFedex Freight, Inc.Hand(s)Struck by swinging or slipping object, other than handheld, n.e.c.
While an employee was lowering a trailer, the landing gear on the trailer spun and struck the employee's right hand.
2020-06-25SanfordFloridaAvocet Aviation Services, LLCBrainOther fall to lower level
An employee was working to remove an aircraft landing gear assembly. The landing gear moved and struck either the employee or the ladder that the employee was standing on, causing the employee to fall to the ground. The employee was knocked unconscious, suffering a concussion and leg bruising. He was hospitalized.
2020-06-23GreencastlePennsylvaniaAmerican Fibertech CorporationFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was on the production floor cleaning a machine with a metal rod. The metal rod got caught and was pulled by the gear of the machine causing the handle of the rod to press the employee's fingers against the edge of the area being cleaned. The employee's index, middle, and ring fingers were amputated.
2020-06-19FarmingtonMissouriFlooring SystemsChest, except internal location of diseases or disordersStruck or run over by rolling powered vehicle
An employee was attempting to fix a transmission issue in a box truck. He was underneath the vehicle when the transmission slipped out of gear and the vehicle rolled backwards onto him. As a result, he suffered broken ribs, scrapes to the side and buttocks, a collapsed lung, and bruises.
2020-06-11JacksonvilleFloridaSteelcon Supply CoFingertip(s)Caught in running equipment or machinery during regular operation
On June 11, 2020, at 1:30 PM an employee was operating the radius bending machine. He was bending two pieces of rebar, when his glove got stuck between the two pieces and pulled his left hand into the machine's gears. The employee sustained a fingertip amputation and a fractured finger.
2020-06-05EutawAlabamaWestRock, Inc.Fingertip(s)Caught in or compressed by equipment or objects
An employee was at a weld press printing station, performing a product change using an overhead crane. His left ring finger got caught between the lock collar and the gear sleeve, causing the amputation of the fingertip.
2020-05-19EnglewoodOhioGarber Electrical Contractors, Inc.Arm(s)Direct exposure to electricity
An employee was replacing cooling fan motors in a switch gear. When he leaned in to install the fan, his right arm came into contact with an energized coil. He received electrical burns to the right arm.
2020-05-05BeaumontTexasGulfstar Industries LLCFinger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee was lowering a transfer hose between two liquid cargo barges. The winch started to free-spool and the hand crank came out of its seat. The employee was putting the hand crank back in to stop the winch from free-spooling, when the gears on the winch caused a partial amputation of a finger on the right hand and a fracture.
2020-05-04AthensAlabamaFoley Products Company, Inc. Finger(s), fingernail(s)Contact with objects and equipment
An employee was removing bolts on a shaft adapter with a ratcheting allen head socket wrench. While the employee was loosening a bolt, the blocking bar for the shaft slipped, allowing the shaft to drop 6 inches and pinch the employee's left little fingertip between the ratchet and the top of the gearbox. The finger was partially amputated.
2020-04-30HarrisonOhioGlenmoor Co.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating an oil pump machine when his right index finger was caught between the machine's chain drive and gear, resulting in amputation.
2020-04-30ShelbyOhioR. S. Hanline and Co., Inc.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
At about 9:30 p.m. on April 30, 2020, an employee was cleaning a conveyor belt on a tomato slicing machine. His left glove got caught in the conveyor gear on the left side of the belt, resulting in the amputation of his left middle fingertip. The belt was running at the time of the incident.
2020-04-15AugustaGeorgiaMilton Ruben Motors, Inc.Multiple body partsCaught between rolling powered vehicle and other object
An employee was working on a car that would not start. When he jumpstarted the starter, the car jumped into gear and pinned him between two cars. He sustained a fractured pelvis and two cracked vertebrae.
2020-04-03Richmond HeightsMissouriClipper Tree, Inc.Upper and lower limb(s)Other fall to lower level more than 30 feet
An employee was performing safety maintenance pruning procedures on a large oak tree using a chainsaw, pole saw, and hand saw. He was using a tree edge saddle/fall protection gear with a climbing line that was secured in the upper canopy of the tree. He had just finished pruning some dead limbs from the tips of a large scaffold branch and started walking back down the limb toward the trunk. He noticed a branch he had cut was stuck between two limbs, so he lowered himself down in between the limb
2020-03-31GrenadaMississippiModine ManufacturingFinger(s), fingernail(s)Caught in running equipment or machinery, n.e.c.
An employee was setting up a machine. The employee's left middle finger came into contact with rotating gears, resulting in a partial amputation.
2020-03-27PlainvilleMassachusettARCO National New England, Inc.Ankle(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was helping a delivery driver stabilize a large switchgear on a lift gate. The switchgear shifted and fell off the gate, breaking the employee's ankle.
2020-03-22GreensburgKansasSUZLON WIND ENERGY CORPORATION Fingertip(s)Compressed or pinched by shifting objects or equipment
An employee was conducting a service call for replacement and assembly of a windmill gear box. The employee picked up the pillow block and while setting it into place, his left middle finger was pinched between a plate hole and the stud of the nacelle bed plate main frame. The employee's left middle fingertip was amputated.
2020-03-12BrenhamTexasStanpac USA, LLCFinger(s), fingernail(s)Struck by falling object or equipment, n.e.c.
An employee was helping install a gearbox on a machine. The gearbox slipped off the lift and caught the employee's right hand against the machine. The hand was lacerated, the middle finger was broken, and the little finger was dislocated.
2020-03-04CliftonNew JerseyXL PlasticsFingertip(s)Caught in running equipment or machinery
An employee was working on an individual folder machine. The employee slipped and their hand contacted a gear resulting in amputation of the right index fingertip.
2020-02-27Green Cove SpringsFloridaArtemis Holdings, LLCNeck, except internal location of diseases or disordersFall on same level, n.e.c.
A machine operator and his co-worker were removing the gear boxes (weighing between 300 and 400 pounds) from the roll mill machine. His co-worker was using the forklift with a lifting strap attachment to lift a gear box off of the roll mill machine to be serviced when another, unbolted gear box got caught on one of the forks of the forklift causing it to break free and moved towards the machine operator. The machine operator moved away from the flying gear box, fell to the ground, and hit his he
2020-02-21Midland CityAlabamaG & M Electrical Contractors, LLCMultiple body partsDirect exposure to electricity, greater than 220 volts
An employee was working on the top section of a 4,160-volt switch gear. The employee's hat fell into the bottom section of the switch gear, and an arc flash burned the employee's face and left hand as he was retrieving it.
2020-02-18Lake DallasTexasEvolutions Brands, IncFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was operating a leather machine to trim excess leather off a shoe when the machine became jammed. While the employee was trying to remove the leather, the machine gears struck the employee's hand, resulting in an amputation of the right index finger.
2020-02-08Grand IslandNebraskaJBS Swift BeefArm(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was performing preventive maintenance on an overhead ground beef take-up conveyor and its motor/gearbox assembly. The employee's left arm was caught in the moving conveyor and skin was burned/removed.
2020-02-07HuntsvilleArkansasLew Thompson & Son Trucking, IncForearm(s)Struck by swinging or slipping object, other than handheld, n.e.c.
An employee was connecting a trailer to a truck. He lowered the trailer's landing gear so the trailer could be connected. The landing gear handle sprung back when released, striking his right arm below the elbow and breaking it. He was hospitalized.
2020-01-18TulsaOklahomaTulsa HyundaiFingertip(s)Caught in running equipment or machinery during regular operation
An employee was lowering a vehicle on an automotive lift when his finger was caught in the nip point of the lift's moving gear, resulting in a fingertip amputation.
2020-01-03ChicagoIllinoisCardwell WestinghouseFingertip(s)Caught in running equipment or machinery during regular operation
On January 3, 2020, a press operator was using the press machine on the draft gear line and a welder was observing the press operator insert pins into a draft gear. The pins were not correctly inserted into the draft gear and the welder attempted to insert the pins properly. The press machine cycled, pressing down on the draft gear, and the welder's hands were pinched between the pins and conveyor guide rail, resulting in amputation of the left index fingertip and a laceration to the right pinky
2019-09-18AtlantaGeorgiaDelta AirlinesFingertip(s)Caught in or compressed by equipment or objects
An employee was attempting to install a main landing gear when his finger was caught between the gear lube and trunnion lube, resulting in left middle and ring fingertip amputations.
2019-09-16GlasgowWest VirginiStoneMor Partners L.P.Multiple body partsFall or jump from vehicle in normal operation, nonroadway
An employee was helping another employee pull a lawnmower out of a ditch using a tractor. The tractor went into gear and knocked the employee off the tractor. The tractor then ran over the employee's leg and face causing injuries.
2019-08-28Broken ArrowOklahomaMill Creek Lumber and SupplyFingertip(s)Caught in or compressed by equipment or objects
An employee was trying to remove a chain that was bound up in a door stacker machine. When the employee removed the chain, it became free and rolled over. The employee's fingers were then caught between the chain and gear, resulting in possible middle and ring fingertip amputations on the right hand.
2019-08-12PeeverSouth DakotaMasTec Services Company, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was attempting to remove a drive gear from beneath equipment. The employee was operating a pneumatic drill with his left hand while bracing himself with his right hand on the drive gear. The torque of the drill caused the gear to shift and catch the distal phalange of his right pinky finger, resulting in a partial amputation.
2019-08-06BuffaloNew YorkCHEMICAL DISTRIBUTORS, INC.TrunkExposure through intact skin, eyes, or other exposed tissue
An employee was preparing to transfer hydrofluoric acid. A transfer pump motor/gear needed repair in order to transfer the hydrofluoric acid. The employee removed the pump, made the repair, and returned to reassemble the pump. The employee was splashed by hydrofluoric acid and sustained chemical burns to the torso.
2019-08-05Sunny Isles BeachFloridaJORDAN HIGH VOLTAGE INCUpper and lower limb(s)Direct exposure to electricity, greater than 220 volts
An employee was working on a 7.6 kV electrical switch gear panel to add a new cable. The employee was electrocuted and sustained burns to both feet and the right hand.
2019-08-04ItascaIllinoisHearthside Food Solutions, LLCFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
On August 4, 2019, a maintenance mechanic was tracking plastic film through a package-sealing machine during a setup process. A film clip caught the mechanic's jacket, pulling the mechanic's right hand toward the chain and gear. The mechanic suffered amputation of the middle and fourth fingertips.
2019-08-02MiamiFloridaBowlero MiamiFingertip(s)Contact with objects and equipment
An employee was moving a gearbox when it landed on his index finger, amputating the tip. He was hospitalized.
2019-07-29Van BurenArkansasFusion Power, LLC.BODY SYSTEMSDirect exposure to electricity, 220 volts or less
An employee working in climbing gear was installing a new ground wire on a power pole. He made contact with a bracket for a security light, which was energized because the photo controller was improperly wired. After making contact, he donned "secondary" gloves and continued working. About 20-30 minutes later he lost consciousness and stopped breathing. He was hospitalized with cardiac arrest.
2019-07-26LenexaKansasBARTS ELECTRICMultiple body partsDirect exposure to electricity
An employee had a team working on a new conduit feeder to a substation switchgear. The 480-volt side of the switchgear where the work was taking place was locked out, tagged out, and verified with a meter to not have power. At the entrance point of the conduit into the substation, another employee was using a knock-out set to punch a hole into the gear. He was having trouble getting the knock-out started, so the injured employee attempted to help him. The injured employee was standing on a two-
2019-07-17Heber SpringsArkansasSaint Jean IndustriesFingertip(s)Caught in running equipment or machinery during regular operation
An employee was working inside a robotic cell, handling parts coming out of an X-ray machine. While waiting for the next tray of parts to come out of the X-ray, he rested his hand on the side edge of the roller system. The chain/sprocket teeth then caught his right glove, pulling his fingers into the sprocket. He pulled his right hand out of the sprocket gear and injured the tip of his right middle finger, resulting in a fingertip amputation. The chain and sprocket were unguarded at the time of
2019-07-08SteeleAlabamaUnipres Alabama, Inc.Fingertip(s)Caught in or compressed by equipment or objects
An employee was lifting the elevator chain of a 1,200-ton press to place on a gear. The counterweight fell and the employee's left middle finger was caught in the elevator chain, suffering an amputation/crushing injury to the fingertip.
2019-06-18MathisTexasTri-County Warehouse & Mill, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was trying to place a gearbox/motor unit into place using a pry bar and his hands. The gearbox/motor unit was partially in place but did not sit all the way down. The employee tried to feel what was blocking the unit when the unit fell the rest of the way into place and pinched his left thumb, resulting in a thumb amputation at the nailbed.
2019-06-07Belle ChasseLouisianaHutco, Inc.Multiple body partsStruck by swinging or slipping object, other than handheld, n.e.c.
An employee was removing a gear from an engine using a crane. The employee was unhooking a come-a-long when the crane operator noticed tension on the gear box. The crane operator lowered the gear and the employee unhooked the come along. The gear box came loose, swung, and hit the employee, pinning him between the gear box and bulk head. He fractured his left arm and ribs on the left side.
2019-06-05AtlantaGeorgiaHolland LPFinger(s), fingernail(s)Caught in or compressed by equipment or objects
An employee was conducting maintenance on the conveyors. His left index finger was caught in the chain and sprocket of the gear controls causing a partial amputation.
2019-05-30Fort WorthTexasShrieve ChemicalFingertip(s)Caught in or compressed by equipment or objects
Four employees were lowering a boat into the water at a dock. An employee's left middle finger was caught in a gear resulting in a fingertip amputation.
2019-05-28PhoenixvillePennsylvaniaVolpe Dedicated, Inc.Elbow(s)Other fall to lower level less than 6 feet
An employee was stepping down from a semi-tractor cab to hook up airlines and raise the trailer landing gear when the employee's foot missed one of the cab steps, causing the employee to fall 3 to 4 feet and strike the pavement. The employee injured the left elbow, requiring hospitalization and surgery.