DateCityStateEmployerBody PartEvent
2021-10-05LorainOhEnprotech Industrial TechnologiesFingertip(s)Struck by object or equipment dropped by injured worker
On October 5, 2021, an employee was servicing a metal forming machine. As the employee put a torque wrench on a fastener, it fell onto the employee's left thumb. The nail and flesh on the tip of the thumb were torn off.
2021-09-02WillacoocheeGaWMT Housing, LLCEye(s)Struck by discharged or flying object
An employee was shooting brads into the top of a house. The brads came in sleeves, held together by plastic fasteners designed to fall off when the gun was fired. As it came off, one of these plastic fasteners struck and injured his left eye.
2021-04-12WedoweeAlJeld-Wen Windows & DoorsHand(s)Struck by discharged object or substance
An employee was assembling a pallet using a screw gun. The gun double-bounced and shot a fastener through the base of the employee's left hand and into the wrist.
2021-04-09WoosterOhThe Wooster Brush CompanyFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was pointing at the source of a squeaking sound on a hook-and-loop fastener dot application machine. Moving parts caught his left middle finger, causing a fingertip amputation.
2021-03-12NeedhamMaJ.W. CAMPBELL CONSTRUCTION, INC.HeadStruck by discharged object or substance
Two employees collided while one of them was climbing down a ladder carrying a nail gun. The gun discharged, firing a wire nail fastener into the other employee's head. That employee was hospitalized.
2021-01-25SylvaniaGaKOYO BEARINGS NORTH AMERICA, LLCFingertip(s)Struck against moving part of machinery or equipment
A maintenance employee was supporting a machine component by hand while another associate loosened mounting fasteners. The cooling fan blades partially amputated the injured employee's left middle finger (third distal phalanx with acute fracture).
2020-05-22DumasTexasNutrien Ag SolutionsForearm(s)Struck by falling object or equipment, n.e.c.
An employee was performing maintenance on a wheel loader (front-end loader) and removed an access plate to the bottom of the engine compartment. After the fasteners were removed, the access plate fell to the floor and crushed the employee's forearm between the plate and the floor. The employee suffered damage to the muscle and connective tissue (no broken bones).
2020-03-19FitchburgMassachusettAvery Dennison Corporation Fastener DivisionFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was operating a bagger machine line when it became backed up and needed to be cleared. The employee switched the machine to manual and began clearing fasteners with his left hand. The bagger clamps closed on the employee's left ring finger and amputated the fingertip.
2019-04-08SpartaWisconsinCentury Foods International, LLCMultiple body partsContact with hot objects or substances
An employee was tightening a clamp (using channel lock pliers) on a pasteurizer system when a leak was identified. The clamp fastener dislodged while turning and 240-degree liquid discharged onto the employee, causing burns to the waist, abdomen, legs, and knees.
2019-01-11OrlandoFloridaAll State PalletsHand(s), except finger(s)Struck by discharged object or substance
An employee was using a corrugated air gun to repair a pallet when the corrugated fastener cut his left hand and struck an artery. He was hospitalized and required hospitalization.
2018-04-27HinesIllinoisEdward Hines Junior VA HospitalMultiple body partsStruck, caught, or crushed in collapsing structure, equipment, or material, n.e.c.
An employee was cleaning her workstation and organizing her files when a section of the acoustical ceiling (tiles and grid), adjacent light fixtures, and portions of the plaster ceiling above suddenly collapsed due to a prolonged, concealed steam leak that weakened the fastener connections. She sustained a cut to her head, bruise to her head, scratches on her neck, a scratch to her left hand, and irritation to her right hand, requiring hospitalization.
2018-01-12AtlantaGeorgiaLichty Commercial Construction, IncAnkle(s)Other fall to lower level 6 to 10 feet
An employee was standing on a 12' step ladder about 8' off of the ground while cutting a pipe. As he was cutting the pipe, the pipe came loose from the fasteners that were holding it into the ceiling. It swung down, knocking his ladder over and causing him to land wrong on his right ankle. He was hospitalized with a right ankle injury.
2017-08-07BelvidereIllinoisFCA US LLCFinger(s), fingernail(s)Injured by slipping or swinging object held by injured worker
An employee was tightening a bolt with a rotating bolt fastener when the employee's glove became caught in the gap between the sleeve and socket extension. The fastener then amputated the left-hand ring finger.
2017-01-19ForsythGeorgiaCole Technology, Inc.HeadStruck by dislodged flying object, particle
An employee was moving pallets with a forklift when it became stuck in the mud. Two coworkers attempted to pull the forklift out of the mud by tying two straps of fastener together with a clevis and attaching it to a truck that was pulling the forklift. The clevis then broke and swung back, striking and lacerating the employee's head.
2016-08-01RosharonTexasReed Industrial Systems, Inc.Multiple body partsOther fall to lower level 11 to 15 feet
An employee was screwing fasteners into duct work while standing on a ladder. He lost his balance and fell approximately 11 feet, cracking a rib and breaking his right heel.
2015-09-02CollinsvilleIllinoisCAVO BROADBAND COMMUNICATIONS, LLCBrainOther fall to lower level
An employee was preparing to run a new cable line from a utility pole to a house. The employee leaned a 28-foot ladder against the cable strand and was climbing or working when the staple fastener that was holding a strand support came out of the pole. The strand then fell 4 feet and the employee fell from the ladder, sustaining a serious head injury and other broken bones.
2015-08-30La JuntaColoradoLewis Bolt & Nut CompanyFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee had completed a run of five fasteners on an upsetter machine when their left hand got caught in the dies of the machine. The employee's left-hand pinky and ring fingers were amputated.
2015-05-27HerefordTexasEDF Renewable Services Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was operating a fastener tool. While checking the tightness of bolts, he lost balance and pinched his right hand pinky finger between the fastener tool and the wall. Employee suffered an open fracture of the right hand pinky finger and was hospitalized.
2015-05-15ArlingtonTexasGeneral Motors Arlington Assembly PlantFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was trying to install two fasteners that hold a dashboard instrument panel onto a firewall. The employee was wearing gloves; a finger on the glove got caught between the socket and the fastener, pulling the employee's finger into the socket and amputating it at the base.