DateCityStateEmployerBody PartEvent
2021-11-17BucyrusOhGE Lighting Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
On November 17, 2021, an employee was verifying the operation of a bulb crusher machine that had been restarted after a jam. The machine was jogged and pulled in the employee's right-hand glove. He suffered injuries resulting in the amputation of his right index and middle fingers.
2021-02-12LondonderryNhContinental Paving, Inc.Hand(s)Contact with objects and equipment
An employee was working on-site crushing old concrete. He was standing near the hopper of the crusher, pulling out debris. He signaled to the excavator operator to dump the next scoop. A large piece of concrete slid and crushed his left hand against the side of the hopper.
2021-01-06WilmingtonOhLGSTX Services, Inc.BrainStruck by dislodged flying object, particle
At 10:00 a.m. on January 6, 2021, an employee was operating a 55-gallon drum crusher when the ram of the crusher pushed the ½-inch metal door outward, breaking the door welds and striking the employee in the head. The employee suffered head trauma and was hospitalized.
2020-10-13TarentumPaStone Products Inc.NonclassifiableStruck by object falling from vehicle or machinery-other than vehicle part
An employee was attempting to replace a wear pad on a crusher. A come-along, being used to hold an access gate open, came loose and dropped the gate onto the employee. The employee suffered a chipped and/or broken vertebra.
2020-10-02MidlothianTxSTRATEGIC MATERIALS, Inc.Finger(s), fingernail(s)Contact with objects and equipment, n.e.c.
An employee climbed a fixed ladder on the glass crusher to perform a product purge. The employee pulled the handle on the diverter box and the handle snapped and broke. The employee lost his balance and grabbed the side of the metal diverter box with his right hand. The diverter plate fell on his right hand and crushed it against the side of the metal box. The employee sustained a laceration to the index finger which developed an infection and required medical amputation of the intermediate and
2020-09-29Key WestFlCharley Toppino and Sons, Inc.Knee(s) and leg(s)Struck by falling object or equipment
An employee was performing routine maintenance on a conveyor attached to rock crusher/screen equipment. While installing a new conveyor belt, the conveyor support assembly fell and struck the employee's legs. The employee suffered leg and possible knee injuries.
2020-09-29AdairsvilleGaLG Hausys America, IncUpper extremitiesCaught in or compressed by equipment or objects
An employee was cleaning the box chute for a crusher when his left hand slipped between the rollers while they were still turning, causing trauma to the hand and forearm and an amputation.
2020-09-16BarabooWiTeel Plastics, LLCFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
On September 16, 2020, an employee was clearing the bottom tape that had become wrapped around the crusher belt on the bag line. The machine was activated and the employee's left middle finger was caught in the crusher belt resulting in surgical amputation of the fingertip.
2020-07-16HarrisonburgLouisianaD&J ConstructionBrainOther fall to lower level 6 to 10 feet
An employee was preforming daily maintenance on an asphalt crusher when he lost his balance and fell approximately 8 feet to the ground, hitting his head. He was hospitalized.
2020-03-04FirestoneColoradoASPHALT SPECIALTIES CO.Multiple face locationsStruck by dislodged flying object, particle
An excavator was being used to turn a wrench to remove nuts on a crusher. The wrench came loose and hit an employee in the head. The employee suffered a welt and knot on his forehead and a swollen right eye.
2019-07-18BradentonFloridaWOODRUFF & SONS, INC.Multiple trunk locationsOther fall to lower level
An employee stepped off the frame of the crusher and fell to the ground. He was hospitalized with injuries to his ribs and right hip.
2019-05-07BurnsvilleMississippiSouthern Field Maintenance and Fabrication, L.L.C. Neck, except internal location of diseases or disordersStruck by falling object or equipment, n.e.c.
While a crane was lifting a jaw crusher that was being removed for repair a section of ductwork that was connected to the building fell and struck employee on the head. The employee sustained a fractured vertebra.
2019-05-01JacksonvilleFloridaBuilder's Best, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
A temporary employee was operating a metal crusher machine, which binds two metal pieces, when her right index and middle fingers were caught in the machine. She sustained multiple fractures to her fingers and was hospitalized.
2019-02-12TallahasseeFloridaJIMMIE CROWDER EXCAVATING & LAND CLEARING, INC.Arm(s)Caught in running equipment or machinery during regular operation
An employee was conducting concrete crushing operations. The equipment was turned off and the employee moved to an area to remove debris. The concrete crusher was turned back on while the injured employee was in the area causing the amputation of his right arm.
2018-03-21EdgefieldSouth CaroliU.S. DEPARTMENT OF JUSTICEFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating a can crusher machine when it amputated half of one of the employee's fingers.
2018-03-19Prudhoe BayAlaskaDoyon Drilling, Inc.Multiple body partsOther fall to lower level less than 6 feet
An employee was exiting a rock crusher and getting onto a 6-foot step ladder. He was holding onto the handrail while getting his feet onto the ladder. His feet were on the second rung from the top when the ladder kicked out from underneath him. He held onto the handrail momentarily and then fell 4 to 5 feet to the ground (gravel pad), breaking his left wrist and suffering a small compression fracture in his lower back. He was hospitalized.
2017-08-22PecosTexasCharger Earth LLCAnkle(s) and leg(s)Other jump to lower level
An employee was helping to offload a rock crusher and acting as the spotter when the load shifted. As he dismounted the rock crusher to inform the operator he broke his left lower leg and ankle, requiring hospitalization and surgery.
2017-08-14GreeleyColoradoParallel Products of Colorado, LLCToes(s), toenail(s)Caught in running equipment or machinery, n.e.c.
Two employees had shut down a can crusher because the auger was making a funny noise. The injured employee had climbed up to inspect the upper bearing and had set his right foot over to the baler to steady himself. The baler engaged and started down, and the bale ejector chain hook came down on his boot behind the steel toe. His right big toe was amputated.
2017-03-29LuverneAlabamaFred's Stores of Tennessee, Inc.Lower leg(s)Fall on same level
An employee was placing items into a baler (cardboard crusher). When she turned and walked away, she fell to the floor. She was hospitalized with a shattered tibia and fibula in her right leg.
2017-03-23AmarilloTexasExcel Machinery LtdLower leg(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was performing maintenance in the point of operation of a rock crusher. When the retaining pin for the rotor was removed, the employee fell with the rotor into the point of operation. The back of his calves were lacerated and de-gloved by the rotor, requiring hospitalization.
2017-03-01HuntingtonWest VirginiHuntington Alloys CorporationFingertip(s)Caught in running equipment or machinery, n.e.c.
On March 1, 2017, at approximately 3:00 a.m., an employee was injured while visually checking a belt drive in the Thistle Area. A jam had occurred in the crusher. The machine was locked out, the jam was cleared, and the machine was started back up. The employee gained access to a catwalk and knelt down to check the tightness of the belt drive when his knee made contact with a piece of metal causing him to react by throwing his hand out. His gloved hand made contact with the unguarded, moving bel
2016-05-22BronxNew YorkMFM Contracting Corp.Eye(s)Struck by dislodged flying object, particle
A piece of metal from a crusher machine splintered off during routine maintenance and hit an employee's right eye.
2015-10-26JamestownNew YorkJamestown Macadam, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee tried to remove stones and dirt from the crusher machine. The rotor had not stopped turning. His glove got caught in the machine resulting in the amputation of the index finger.
2015-10-15TulsaOklahomaBECCO CONTRACTORS, INC.Hip(s)Fall on same level due to tripping over an object
An employee was performing a walk around visual inspection of the crusher recycler when he tripped on a piece of rebar and fell hard on his left hip and forearm. His hip broke and required surgery.
2015-06-25La MarqueTexasSAI Gulf LLCFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was injured while cleaning a crusher machine. The employee's left index fingertip was amputated.
2015-03-14Battlement MesaColoradoBOS SOLUTIONS, INC.Hand(s)Caught in running equipment or machinery
An employee on an oil rig had his left hand amputated by a rock crusher while dislodging rocks from the machine. Lockout procedures were not followed at the time.
2015-01-26Black River FallsWisconsinGERKE EXCAVATING, INCORPORATEDFinger(s), fingernail(s)Struck, caught, or crushed in other collapsing structure or equipment
Employee received a crushing injury to the right-hand thumb when the collapsible railing on a crusher plant's catwalk vibrated loose and pinned his thumb between the railing and catwalk. The thumb was partially severed and the bone broke. His thumb was later amputated at Rochester Mayo Clinic because blood flow to the thumb could not be re-established.