Date | City | State | Employer | Body Part | Event |
---|---|---|---|---|---|
2021-11-16 | Locust Grove | Ga | Home Depot DFC 6777 | Multiple pelvic region locations | Nonroadway collision with other vehicle |
Two clamp trucks collided as one was coming out of an aisle. The fork on one truck struck the other truck's operator in the hip/pelvis area, causing a fracture there. | |||||
2021-11-16 | Big Lake | Tx | Fleur de Lis Operating, LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was using a pneumatic wrench to tighten a clamp when their thumb became pinched in the clamp, resulting in amputation of the thumb tip. | |||||
2021-11-10 | Manchester | Nh | Northstar Steel & Aluminum, Inc. | Foot (feet) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was moving steel plates from a rack to a pallet for shipping. A set of three steel plates came unclamped from the overhead crane and crushed the employee's foot, resulting in multiple fractures and lacerations. | |||||
2021-11-03 | Plantation | Fl | Davco Electrical Contractors Corp. | Hand(s) | Caught in running equipment or machinery during regular operation |
An employee had put a strap in a mini excavator bucket. It fell out and he went to put it back in. The employee's right hand was clamped in the bucket and fractured. | |||||
2021-11-01 | Buda | Tx | Architectural Surfaces | Leg(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was on the back of a lowboy trailer, guiding a 500-pound stone slab as it was offloaded from the trailer using a forklift with a boom and a stone lifter/slab clamp. The stone slipped out of the lifter and pushed the employee off the trailer, then fell on the employee's right leg just above the ankle. The employee suffered a broken leg and was hospitalized. | |||||
2021-10-23 | Churchville | Ny | American Packaging Corporation | Lower leg(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was in a warehouse, picking up a horizontal roll of paper (weighing 2,000-3,000 pounds) using a forklift. The roll fell from the forklift's clamp and began moving toward a wall. The employee dismounted the forklift and was struck by the roll on the front of the left leg. The leg was broken below the knee and above the ankle. | |||||
2021-10-20 | Aurora | Oh | Cantex Inc. | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was attempting to unjam a machine when the hold down clamp activated and crushed his right ring finger, resulting in amputation below the fingernail. The machine was not locked out or tagged out at the time. | |||||
2021-10-19 | La Crosse | Wi | Advanced Fiber Products, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was servicing a puller pack for a product line in a pultrusion area. The puller pack's hydraulic clamping cylinder clamped down on the employee's right hand. The employee suffered a partial amputation to the index finger. The puller pack was energized at the time. | |||||
2021-10-16 | Cincinnati | Oh | Midwest Filtration LLC | Toes(s), toenail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was reading material labels and entering them into a computer while near a clamp truck when a filter roll slipped from the clamp truck and struck the employee's right foot, resulting in a fracture. | |||||
2021-10-08 | Tampa | Fl | UMI Stone | Chest, except internal location of diseases or disorders | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was moving a granite slab with a gantry crane. When the slab was put on the ground, the crane's clamp hit another piece of granite and released the slab, which struck the employee. The employee suffered a punctured lung and broken ribs. | |||||
2021-10-07 | Lancaster | Pa | Lancaster Leaf Tobacco Company of Pennsylvania, Inc. | Foot (feet) | Pedestrian struck by vehicle in nonroadway area |
An employee was walking when they struck the back of a moving clamp truck. The employee was knocked to the side and fell to the ground, and their foot was possibly run over, resulting in a foot injury that required surgical amputation of the foot. | |||||
2021-10-06 | Mount Zion | Il | Green Valley Manufacturing of Illinois, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
On October 6, 2021, an employee was working at a metal saw when a hydraulic clamp came down on it. The employee suffered an amputation to the tip of the left little finger. | |||||
2021-09-23 | Pottsville | Pa | Ashley Furniture Industries LLC | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
A maintenance employee was attempting to unclog a bag sealer when his left index finger was caught between the heating element and clamp device, resulting in a partial amputation of the fingertip. | |||||
2021-09-21 | Chanute | Ks | Optimus Industries LLC | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was using C- and L-clamps to secure two half-inch steel plates, measuring 12 feet by 12 feet and weighing 400 pounds each. The steel plates were on a beam frame table. A plate moved, resulting in the amputation of the employee's left index finger between the first and second knuckles. | |||||
2021-09-17 | Trussville | Al | FOX Factory | Finger(s), fingernail(s) | Caught in running equipment or machinery |
An employee was working on a thermo-former machine when one of the clamps crushed her left thumb in the frame. | |||||
2021-09-15 | San Antonio | Tx | Improved Piping Products Inc. | Fingertip(s) | Caught in or compressed by equipment or objects |
An employee was moving a hydraulic clamp. His right hand was caught in a pinch point created by the piston, and the ring fingertip was amputated. | |||||
2021-08-24 | Fort Worth | Tx | Willbanks Metals, Inc. | Wrist(s) | Struck by falling object or equipment |
An employee was guiding a steel plate into a press brake. The plate slipped from the clamp that was suspending it in the air. It fell on the employee, who suffered a broken wrist. | |||||
2021-08-24 | Saint Marys | Oh | SETEX INC. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
The injured employee was training a co-worker in a weld cell and putting parts into the fixture. The injured employee's left middle finger got caught in the head rest clamp resulting in a partial amputation of the finger at the nailbed. | |||||
2021-08-23 | Houston | Tx | Ferguson Enterprises, LLC | Hip(s) | Pedestrian struck by vehicle in nonroadway area |
An employee was walking out of a storage area on a warehouse floor when a clamp truck struck him. He suffered a broken pelvis. | |||||
2021-08-12 | Calhoun | Ga | Mohawk Industries, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was placing a rug into the mandrel opening to be rolled and wrapped when she experienced an issue getting the rug corner into the slot opening. At the same time, a co-worker came to her left to place a second rug into position to be rolled and wrapped on the same cycle. The switch that clamps the ends of the rugs was activated and the employee's right middle fingertip was pinched, resulting in a partial amputation. | |||||
2021-08-09 | Bentonville | Ar | LITHKO CONTRACTING LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was steadying a wall form as a tower crane lowered it. The employee's left middle finger was pinched between the ribbed area of the formwork and a clamp. The fingertip was amputated. | |||||
2021-08-06 | Fairview Park | Oh | Contract Network Services LLC | Leg(s) | Other fall to lower level |
An employee was on a ladder when a mid-span clamp attachment broke, causing the tension of the fiber optic cable to waver. This caused the employee to bounce around, then fall from the ladder to the ground. The employee suffered a broken leg. | |||||
2021-07-29 | Black Creek | Wi | Saputo Cheese USA Inc. | Back, including spine, spinal cord | Overexertion in holding, carrying, or wielding-single episode |
An employee was disconnecting a wash line. While in a squatting position, the employee was using a rubber hammer to tighten a clamp and sustained a back injury. | |||||
2021-07-27 | Brenton | Wv | Diversified Gas & Oil Corporation | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee raised a well pump jack and placed the top and bottom rod clamps on the lifting rod. The bottom rod clamp slipped, causing the well pump jack to lower and amputate the employee's left thumb. | |||||
2021-07-27 | Kansas City | Ks | Pretech Corporation | Ankle(s) | Fall on same level due to tripping over an object |
An employee tripped on a clamp and fractured his ankle. | |||||
2021-07-09 | South Sioux City | Ne | Empirical Foods | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was loading a band saw when their left pinky finger was caught in the pneumatic clamp resulting in a fingertip amputation. | |||||
2021-07-08 | Syracuse | Ny | Murphy & Nolan Inc | Finger(s), fingernail(s) | Caught in running equipment or machinery |
An employee's right-hand glove was pinned by the vise clamp of a saw. The employee suffered an amputation to the right index finger. | |||||
2021-07-08 | Canton | Oh | Ohio Gratings, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was using a machine to cut grating to size when the clamp on the machine amputated their thumb. | |||||
2021-07-03 | Rhinelander | Wi | Lake Shore Systems, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a CNC bandsaw with an automatic material loading shuttle and clamping mechanism. The wood that the machine was shuttling into the clamping area was tipping, and the employee reached over to stabilize it for the clamp. The clamp closed on the employee's right index finger and amputated the fingertip. | |||||
2021-06-23 | Pleasanton | Tx | NexTier Completion Solutions Inc. | Hand(s) | Contact with hot objects or substances |
An employee was tightening a hose clamp. The hose broke and hot liquid sprayed onto the employee causing third-degree burns to both hands. | |||||
2021-06-16 | Williston | Nd | Outlaw Well Service, Inc. | Finger(s), fingernail(s) | Contact with objects and equipment |
An employee was working on a workover rig when a suspended rod and clamp struck their little finger and crushed it on an elevator sitting below, resulting in multiple finger fractures. | |||||
2021-06-01 | Delhi | Ny | Saputo Dairy Foods USA, LLC | Multiple body parts | Contact with hot objects or substances |
An employee was loosening a clamp on a steam line for a carton filling machine. Steam burst out of the pipe where the clamp was and burned the employee's chest and arms. | |||||
2021-06-01 | Sheboygan | Wi | Gardner Denver Thomas, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
Two employees were fixing the clamping mechanism on a trim press. The press activated and came down on top of an employee's left thumb and lacerated it. | |||||
2021-05-26 | Westville | Ok | ABB, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting bar stock with an automated saw. The pneumatic clamp crushed her left ring finger at the nailbed. The fingertip was medically amputated at the first knuckle. | |||||
2021-05-21 | Harmony | Pa | HARMONY CASTINGS, LLC | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was loading a casting into a core knockout machine. When the machine was activated, the casting slipped out of the clamps. The employee was trying to catch it when the clamps caught the tip of his left index finger. He suffered an amputation (without bone loss) to the fingertip. | |||||
2021-05-21 | State College | Pa | R.H. MARCON, INCORPORATED | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was bringing a brake down on a piece of metal. The clamping mechanism caught his right thumb, causing the amputation of the thumb tip. | |||||
2021-05-13 | Houston | Tx | Team Industrial Services, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery |
An employee was helping perform an inflatable line stop. During the line stop installation, the launch tube slid into the open valve, pinching the employee's left thumb between the locking clamp and the set point stopping block. The thumb was broken and lacerated. | |||||
2021-05-04 | Double Springs | Al | Lippert Components Manufacturing, Inc. | Hand(s) and finger(s) | Caught in running equipment or machinery during regular operation |
An employee was using a corner cleaner machine to cut excess vinyl material off the finished window frame and caught her hand under the clamp mechanism. The clamp pinched her hand against the window frame resulting in fractures to the hand and/or fingers. | |||||
2021-05-03 | Decatur | Il | T/CCI Manufacturing, LLC | Fingertip(s) | Caught in running equipment or machinery during regular operation |
On May 3, 2021, an employee suffered an amputation to the tip of her right middle finger while placing a rod in a clamp fixture of a machine. | |||||
2021-05-03 | Tobyhanna | Pa | Tobyhanna Army Depot | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was loading stock into a bandsaw's automatic feeder. As the employee pushed the stock through the feeder, the hydraulic clamp came down and caught the employee's right hand against the stock. The employee's ring finger was partially amputated. | |||||
2021-04-23 | Stockton | Al | Overseas Hardwoods Company, Inc. | Hand(s), except finger(s) | Caught in running equipment or machinery during regular operation |
After an employee turned on a finger joint machine and a clamp cylinder, the employee's right hand was caught by the lumber clamp in the machine's operating area. He suffered broken bones in the palm of the hand. | |||||
2021-04-12 | Conroe | Tx | Stainless Structural Works, LLC | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was adjusting steel strips in a bandsaw. He activated the hydraulic clamp to hold the material in place, and the clamp amputated the tip of his right thumb. | |||||
2021-04-12 | Montgomery | Al | C. Hager & Sons Hinge Manufacturing Company, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was loading a part into a gang mill. When the clamping mechanism was activated, it caught his right index finger, causing the amputation of the fingertip. | |||||
2021-04-07 | Houston | Tx | Celeros Flow Technology, LLC | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was setting up to cut pipe with a saw. A clamp actuated and pinched the employee's left index finger between the clamp and a pipe. The distal third of his left index finger was amputated. | |||||
2021-04-05 | Antigo | Wi | Johnson Electric Coil Co., Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a shearing machine when their left middle finger was caught in the clamp's pinch point, resulting in a partial amputation to the nail area. | |||||
2021-03-25 | Manitowoc | Wi | Manitowoc Tool & Machining, LLC | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was clamping an aluminum part into the chuck of a vertical turning lathe when the foot pedal was engaged causing the hydraulic clamp to close on the employee's left ring finger, amputating the fingertip. | |||||
2021-03-24 | Rogers | Ar | Tyson Poultry, INC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was performing maintenance on the frame of a forming machine. When the employee closed the slatted frame, his right ring finger was pinched between it and the outside shoe bellows clamp. He suffered a partial amputation to the fingertip. | |||||
2021-03-21 | Kent | Oh | Industrial Tube & Steel Corporation | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was using a horizontal bandsaw when his left hand and fingers were caught between the saw clamp and the part on the saw. He suffered a finger amputation. | |||||
2021-03-11 | Warren | Oh | Liberty Engineered Wire Products | Finger(s), fingernail(s) | Caught in running equipment or machinery, n.e.c. |
An employee was performing setup on a straight cut machine when her left middle finger was pinched in a clamp mechanism, causing an amputation to the finger. | |||||
2021-03-04 | Lakeland | Fl | Keymark Corporation of Florida | Fingertip(s) | Caught in or compressed by equipment or objects |
An employee was repairing a clamp whose pin had become compromised and attempting to clean a sensor. The clamp closed into the material, pinching the employee's right index finger and causing an amputation to the fingertip. | |||||
2021-02-24 | Elgin | Il | ELGIN INDUSTRIES, INC. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a welding machine when an air-powered clamp block pinched the employee's fingers between the stationary and the moving clamp pieces, resulting in amputation of two fingertips on the left hand. | |||||
2021-02-23 | Longview | Tx | Amaya Utility Inc. | Hand(s) | Indirect exposure to electricity |
An employee was pulling cable while standing in front of a directional drilling machine when the machine struck an electrical pole riser. The electrical pole riser clamp had a power cord that contacted the drilling machine. The employee was shocked and sustained burns to the right hand. | |||||
2021-02-17 | Auburn | Al | Seohan Auto USA | Fingertip(s) | Caught in or compressed by equipment or objects |
An employee was adjusting a clamp when the clamper came down and amputated the tip of his left index finger. | |||||
2021-02-12 | Lone Star | Tx | Texas Tubular Products | Arm(s) | Caught in running equipment or machinery during regular operation |
An employee was operating the south-end facer when a pneumatic clamp that holds the pipe down engaged. The clamp came down on the employee's right arm and fractured it. | |||||
2021-01-30 | Chicago | Il | G. E. Mathis Company | Lower leg(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
On 1/30/2021, at 6:00 AM, an employee was operating an overhead crane to move steel plate material in the horizontal position. The crane was equipped with lifting devices including a spreader bar, chains, and plate clamps. The rigging failed and the steel plate fell on the employee's right ankle resulting in lower leg fractures. | |||||
2021-01-27 | Barberton | Oh | Hycom Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was working on a flare machine when a clamp closed on his little finger. He suffered an amputation to the finger. | |||||
2021-01-25 | Bethlehem | Pa | BREY&KRAUSE MFR CO AND L.M. SMOYER BRASS PRODUCTS | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was welding a tube to a flange when a clamp device closed on her right thumb. The thumb tip was medically amputated above the first knuckle. | |||||
2021-01-21 | Merritt Island | Fl | Sauer Mechanical, LLC. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
On January 21, 2021, an apprentice pipe fitter was making sure that the facing machine's blades were set properly when a clamp on the machine loosened, pinching the employee's right thumb and resulting in an amputation to the tip of his thumb without bone loss. | |||||
2021-01-06 | Mckinney | Tx | Dynacraft, a Paccar Company | Fingertip(s) | Caught in running equipment or machinery |
An employee was adjusting end caps on a fuel tank when the end cap clamps were activated, causing the employee's right thumb tip to be pinched between a cylinder and the end cap and resulting in an amputation. | |||||
2021-01-05 | Kansas City | Mo | Blount International Incorporated | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was working in the milling department when a clamp caught their right ring finger causing a partial amputation. | |||||
2020-10-20 | Desoto | Tx | Diab Americas LP | Hand(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was operating a welding machine when it was jammed by a piece of material. The employee cleared the jam and started the machine. The material jammed the machine again. The employee walked behind the machine and proceeded to clear the jam. Soon after, the machine continued to cycle. A set of material clamps came down and a material pusher came forward. The employee was then caught in the machinery and both of his hands were amputated. | |||||
2020-10-15 | Deer Park | Tx | Makco Enterprises, LLC. | Toes(s), toenail(s) | Struck by swinging part of powered vehicle |
Employees were placing stumps in the back of a truck. The injured employee was in the back of the truck guiding the loader when the loader closed its clamps to exit the back of the truck and pinched the employee's left foot in the clamps. The employee sustained injury to a toe on the left foot. | |||||
2020-10-14 | Osceola | Ar | Big River Steel, LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was removing a light fixture from a conduit. He was using a fixture clamp vise and ratchet set. The fixture shifted and amputated a quarter-inch of his left index fingertip. | |||||
2020-10-13 | Walton Hills | Oh | NPK Construction Equipment Inc. | Toes(s), toenail(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was placing a steel plate back into a rack using a 10-ton overhead crane and a plate clamp. The plate fell, hitting the employee's left foot and amputating the big toe as well as part of the second toe. | |||||
2020-10-08 | Milford | Nh | HITCHINER MANUFACTURING CO., INC. | Fingertip(s) | Caught in or compressed by equipment or objects |
An employee was loading a part into a machine when the clamping mechanism closed on their hand, resulting in amputation of the left index fingertip. | |||||
2020-10-05 | Saint Louis | Mo | MCCARTHY | Head and neck | Other fall to lower level |
An employee sustained head and neck injuries while removing a form panel that was used to form a pilaster as part of a concrete wall system. There were 12 clamping bolts originally holding the wall in place while the concrete was poured. Six clamping bolts had been removed prior to the employee ascending the wall. The employee's task was to remove four of the remaining clamping bolts while ascending the wall and then connect the rigging from the crane to the panel so it could be hoisted out of t | |||||
2020-10-05 | New Orleans | La | BrandSafway LLC Prairieville | Multiple body parts | Other fall to lower level 16 to 20 feet |
While erecting a scaffold, an employee was descending a clamp-on ladder when he fell approximately 20 feet to the ground. The employee sustained a dislocated shoulder and fractures to the toes, a hip, and ribs. | |||||
2020-09-23 | Edwardsville | Il | Saddle Creek Logistics Services | Toes(s), toenail(s) | Nonroadway collision with object other than vehicle, n.e.c. |
An employee was operating a standup clamp truck, transporting a large box (washing machine) across a facility. As the truck passed a structural support beam, the corner of a clamp at the back struck the beam. The resulting jolt caused the employee to fall out of the truck, which continued to roll forward and struck the employee's foot. The employee suffered a partially amputated big toe. | |||||
2020-09-17 | Mansfield | Oh | America's Best Siding LLC | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was using a break machine to form metal . His right index finger was caught between the machine's clamp and the metal material, causing an amputation to the tip of the finger. | |||||
2020-09-08 | Garden City | Ks | American Warrior Inc | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was working rods up and down. His left hand was between the bottom clamp and the rod rotator when the rod rotator fell down, smashing and fracturing his left thumb and index finger. | |||||
2020-09-03 | Hoisington | Ks | SUPERIOR ESSEX | Fingertip(s) | Struck by swinging part of powered vehicle |
An employee was making repairs on a jacket line using a forklift. The employee's left thumb was caught between the forklift's forks and a clamp. The thumb tip was amputated. | |||||
2020-09-02 | Neenah | Wi | Bent Tubes LLC | Fingertip(s) | Fall on same level due to slipping |
An employee was leaning over the laser sensors using his finger to check that a part was not rotating in the pipe bending machine when he slipped and fell into the clamp on the machine. The employee's right index fingertip was amputated. | |||||
2020-08-24 | Trenton | Oh | Magnode Corporation | Hand(s) and wrist(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was fixing a clamp on a metal saw. The clamp was moved and caught the employee's hand/wrist against the side wall of the machine, breaking them. | |||||
2020-08-21 | Atlanta | Ga | CKS Packaging Inc. | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was wiping the top of a machine with a cloth when her finger slipped through an opening on the guard and the mold clamp closed on her fingertip and amputated it. | |||||
2020-08-20 | Edison | Nj | Unis, LLC | Ankle(s) | Struck by falling object or equipment, n.e.c. |
An employee was working on slab lifter tongs with another employee. The employee was placing a stone slab wedge to separate bundles so that the clamps could pick up a stone slab. The 400-pound stone slab overturned, pinning the employee between the stone slab and the unloading dock. The employee sustained a broken ankle and was hospitalized. | |||||
2020-08-04 | Jackson Center | Pa | Penn Stainless Products, Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was pulling a plate clamp out from under a 1,600-pound stainless steel plate above a plasma table. The plate slipped out and pinched his finger against one of the slats on the plasma table. His fingertip was medically amputated at the first knuckle. | |||||
2020-07-31 | Tiffin | Ohio | Webster Industries Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee working on a milling machine placed a round bushing into the fixture-activated pneumatic hold-down. The clamp came down and partially amputated her left index finger. | |||||
2020-07-28 | Auburn | Alabama | PyongSan America, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
A temporary employee was operating a leak tester machine when the clamping cylinder caught her left middle finger in the point of operation. The fingertip was amputated. | |||||
2020-07-17 | North Kansas City | Mo | Full Circle Chemical Supply | Hand(s) and arm(s) | Ignition of vapors, gases, or liquids |
A temporary employee was using a cordless drill to attach a hose clamp to machinery. The drill arced, which caused a fuel bucket to ignite. The employee's left arm and right hand were burned by the fire. | |||||
2020-07-16 | Geneva | Ohio | Elster Perfection Honeywell | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was leak testing gas riser parts when the leak tester's sliding clamp returned to its home position and caught his left index fingertip, resulting in a partial amputation. | |||||
2020-07-06 | Oneida | New York | HP Hood LLC | Multiple body parts | Contact with hot objects or substances |
An employee was removing a clamp from a pipe connection. The pipe sprayed 200-degree water onto the employee, who suffered second-degree burns to the face and from the chest to the knees. | |||||
2020-07-01 | Anniston | Alabama | BAE Systems, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee working at the magnetic particle inspection clamp in the track machine line activated a hydraulic clamp and pinched their right ring finger between the side edge of the product being clamped and the clamp wall. The pinching action trapped the employee's finger and removed the soft tissue portion of the ring finger pad under the fingernail, resulting in a partial amputation. | |||||
2020-06-30 | Forest Park | Georgia | VIATECH PUBLISHING SOLUTIONS, INC. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
At about 12:30 p.m. on June 30, 2020, an employee was adjusting the position of books on a cutting machine. The clamp cycled and came down on the employee's hand, causing a partial finger amputation. | |||||
2020-06-19 | Mentor | Ohio | PAKO Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a CNC bender when the machine closed the tooling clamp on his left index finger. The employee sustained an amputation to the left index finger. | |||||
2020-06-17 | Waco | Texas | Swan Products, LLC | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was about to start winding the core of a hose on a reel, which requires attaching the end of the core to an air inlet on the side of the reel. The reel becomes automated once the hose core is attached and begins to spin. When she went to attach the core to the air inlet, the reel began to automatically spin. Her hand was caught between the spinning reel and a clamp that holds the pin in, resulting in a fracture to the second metacarpal bone of the left hand. | |||||
2020-06-16 | Evergreen | Colorado | Bridgestone Retail Operations, LLC | Arm(s) | Explosion of pressure vessel, piping, or tire |
An employee was performing a tire exchange service. During the air up process on the rim clamp tire equipment, the tire sidewall failed/exploded, causing the rim and tire assembly to strike the employee in the left arm/wrist area. The employee was hospitalized with left arm injuries. | |||||
2020-06-14 | Lincoln | Nebraska | Duncan Aviation Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting metal when his left ring finger was caught under a metal clamp. Once he pressed the pedal to actuate the cutter, his finger was crushed from the nail to the fingertip causing it to be amputated. | |||||
2020-05-26 | Sylacauga | Alabama | American Metal Group | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was positioning the end of a coil into the butt welder machine. As the employee pressed the foot pedal to close the pneumatic clamp his right index finger was caught in the clamp and amputated at the first knuckle. | |||||
2020-05-13 | Maryneal | Texas | Cholla Petroleum, Inc. | Head | Other fall to lower level less than 6 feet |
An employee was tightening a nut on a polished rod's 2-bolt clamp on a horse head while standing on a well head cap 2 feet off ground when the employee slipped and fell back, hitting a concrete block. The employee suffered a head contusion. | |||||
2020-05-04 | Seguin | Texas | Central States Manufacturing- Texas Division | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was holding a piece of trim to be bent in a trim folding machine. The machine actuated and the employee's left hand was caught under the clamping beam. The employee's fourth and fifth fingertips were amputated. | |||||
2020-04-28 | Denver | Colorado | HEGGEM-LUNDQUIST | Chest, except internal location of diseases or disorders | Other fall to lower level less than 6 feet |
An employee was working from a scaffold, installing a beam clamp. The employee fell 5 feet to the ground, suffering three broken ribs as well as head and ear lacerations from his hard hat. | |||||
2020-04-02 | Atlanta | Georgia | Altium Packaging LP | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was removing jammed plastic between an extrusion head and the top of molds when the mold clamp closed, crushing the employee's left-hand pinky, ring, and middle fingers. The employee was hospitalized and required surgery. | |||||
2020-03-23 | Stanley | North Dakota | American Well Services | Chest, except internal location of diseases or disorders | Other fall to lower level |
An employee was removing a clamp from the cable on the swivel. The decking had been removed and the employee was standing on the beam. The employee slipped and fell, landing on the surface casing valve. The employee sustained broken ribs and a punctured lung. | |||||
2020-03-19 | Fitchburg | Massachusett | Avery Dennison Corporation Fastener Division | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was operating a bagger machine line when it became backed up and needed to be cleared. The employee switched the machine to manual and began clearing fasteners with his left hand. The bagger clamps closed on the employee's left ring finger and amputated the fingertip. | |||||
2020-03-14 | Temple | Texas | McLane Southwest | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was repairing a fuel pole stanchion when his finger was caught between the clamp and the steel pole. The employee sustained a fingertip amputation. | |||||
2020-03-11 | Birmingham | Alabama | Berger-US, Inc | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a resistance welder. The employee placed a ring band on the lower electrode. She then placed a closure handle on the top of the band. Once the welding process was initiated, the employee reached for the next band to process with her left hand, and reached for the ring she was currently welding with her right hand. The machine had not completed the clamping process and her right index finger was caught between the upper electrode and the ring. The fingertip was amputated | |||||
2020-02-28 | Barnhart | Missouri | MIDWEST CONTAINER | Hand(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was monitoring machines on the production floor when he noticed plastic sticking to the head of the machine. As the employee tried to remove the plastic, the machine clamp closed on and crushed his left hand. | |||||
2020-02-21 | Decatur | Texas | Poco Graphite, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a band saw and using a push stick. He placed material on the table and secured it with clamps. The material became jammed, so he moved to the other side and activated the saw blade. The saw blade caught the push stick and amputated his right index finger. | |||||
2020-02-16 | Austin | Texas | Ultra Clean Technology, Inc. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was using a tube squaring machine to cut tubes. The employee had turned off the machine in order to tighten the clamping shell. The machine had not come to a full stop as the employee moved his right hand into position to turn the tensioning screw. While turning the tensioning screw, the employee’s right hand slipped and his right ring finger contacted the square tube blade resulting in a fingertip amputation without bone loss. | |||||
2020-02-14 | Groveport | Ohio | SADDLE CREEK CORPORATION | Brain | Fall or jump from vehicle in normal operation, nonroadway |
At about 12:00 p.m. on February 14, 2020, an employee was taking product through a warehouse using a stand-up clamp truck. He fell off the lift, struck his head on the concrete ground, and lost consciousness, beginning to shake. He was hospitalized, in a coma and suffering from a skull laceration. |