DateCityStateEmployerBody PartEvent
2021-11-05PeytonCoTowers NorthwestFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was pulling a cable up a communication tower using a capstan winch. His left arm contacted the winch line and became entangled under the rope and drum. He suffered three broken arm bones, constriction wounds, and lacerations to the arm. His middle and ring fingers were medically amputated.
2021-11-01DaltonGaMarketing Alliance Group, INC.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was applying aluminum caps to the corners of cardboard material using a riveting machine. The employee went to grab a cap that had popped off a corner when the foot pedal was activated and the employee's left index finger was crushed by the riveting machine, resulting in a fingertip amputation. A guard was in place at the time.
2021-10-02Cortlandt ManorNySafety Marking IncChest, except internal location of diseases or disordersOther fall to lower level
While securing tank caps, an employee fell from the side of a paint truck when their pipe wrench came loose. They landed on the asphalt surface of a parking lot. The employee suffered a collapsed left lung, contusions to the hands and face, neck pain, and was hospitalized.
2021-09-29EdgertonOhAIR-WAY MANUFACTURING COMPANYFingertip(s)Caught in running equipment or machinery during regular operation
On September 29, 2021, an employee was using a machine that cut holes in plastic caps. The machine's blade amputated the tip of his finger.
2021-09-08GarlandTxCosmax NBT USA, Inc.Fingertip(s)Caught in running equipment or machinery
An employee was adjusting an encapsulating tabulating machine press. The machine activated and came down on the employee's right hand, amputating the middle fingertip.
2021-08-09University ParkPaStructural Group Inc.Ankle(s) and leg(s)Fall or jump from and struck by same vehicle in normal operation, nonroadway
Employees were lifting a capstone with a chain hoist. The hoist shifted forward and caused the capstone to come into contact with an employee's leg. The employee suffered a broken fibula and a dislocated ankle.
2021-05-27QuincyIlQuincy Medical Group (QMG)Thigh(s)Other fall to lower level less than 6 feet
At about 1:30 p.m. on May 27, 2021, an employee was carrying a 4-by-6 plywood panel down stairs from a second floor to a mezzanine. The employee fell at the last or second-to-last step and landed on the floor. Both of the employee's knees were injured, with quadriceps tendons torn from the kneecaps. The employee was hospitalized and underwent surgery.
2021-05-18Oak HarborOhSIGNATURE LABEL INC.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was unjamming caps of deodorant sticks from an unscrambler machine when their right ring finger became pinched between the orienting disc and the timing belt of the machine, resulting in an amputation of the tip of the right ring finger.
2021-05-13RoanokeTxVersacom LLCFinger(s), fingernail(s)Struck by object or equipment dropped by other person
Two employees were lifting a capstan hoist out of the bed of a truck when it fell, landing on one employee's left middle finger and causing a partial amputation.
2021-04-16BarbertonOhMALCO PRODUCTS INCFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was helping to get bottle spray trigger caps moving through the orienter machine when his right ring fingertip got caught between two spinning belts. The employee sustained an amputation to his finger.
2021-03-02ManorTxHCS WorkriseFingertip(s)Struck by falling object or equipment
Employees were installing some caps and a torque tube (a long cylindrical metal frame 6 inches in diameter). The tube fell, catching an employee's left little fingertip against a post. The fingertip was amputated.
2021-02-16ChicagoIlKorex Chicago, LLCFingertip(s)Caught in running equipment or machinery
An employee was trying to remove caps from the belt of a capping machine. The employee's finger was caught between the belt and roller on the assembly line, resulting in an amputation of the right pinky fingertip.
2021-01-07BrunswickGaKing & Prince Seafood CorporationMultiple body partsStruck by discharged object or substance
An employee was holding a pipe assembly, filled with CO2 pellets and sealed at the ends. The CO2 gas expanded, causing the end caps to fly off; they struck and injured the employee's chest, his right bicep, and his right hand.
2021-01-06MckinneyTxDynacraft, a Paccar CompanyFingertip(s)Caught in running equipment or machinery
An employee was adjusting end caps on a fuel tank when the end cap clamps were activated, causing the employee's right thumb tip to be pinched between a cylinder and the end cap and resulting in an amputation.
2020-09-19AthensGaSAC WIRELESS LLCFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating a capstan hoist when two fingers on his right hand were caught between the rope and the drum of the hoist resulting in amputation of the distal phalanges.
2020-09-18FarmingdaleNjNutraStar Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was cleaning an encapsulation machine when her left index finger got caught between two segments of the machine and was amputated. An employee was working on a granulator machine to align the hopper when his right middle finger got caught between the hopper and the base of the machine resulting in a fingertip amputation. Note to user: This record contains two separate events that were reported simultaneously to OSHA by the employer. These events are captured as one report.
2020-09-14PerryFlPACEM -DefenseFingertip(s)Caught in running equipment or machinery during regular operation
On September 14, 2020, an employee was guiding powder flow into the capsules on a pellet press. The employee's right middle finger was pinched in the press, causing an amputation to the fingertip.
2020-03-23CorfuNew YorkYancey's Fancy Inc.Knee(s)Other fall to lower level less than 6 feet
An employee fell while walking down stairs. The employee landed on a metal landing and broke both kneecaps.
2020-03-11WilliamsportPennsylvaniaGeneral Cable Corp.Fingertip(s)Caught in running equipment or machinery, n.e.c.
At about 11:30 p.m. on March 11, 2020, an employee was setting up a drawbench machine to pull aluminum wire. The employee's right ring finger was caught between the wire and the capstan wheel, and the fingertip was amputated.
2019-08-01LimaOhioLima Memorial Health SystemsKnee(s)Fall on same level due to tripping over an object
At about 12:00 p.m. on August 1, 2019, an employee was leaving a cafeteria when her foot caught on rubber flooring and she fell, breaking both kneecaps. She was hospitalized.
2019-07-23AustinTexasThomas PrintworksKnee(s)Fall on same level due to tripping on uneven surface
An employee was making a delivery at a customer's job site. He went to step into the job site trailer when his left foot became stuck on the threshold, causing him to lose balance and hit both knees against the wall of the trailer. He then collapsed to the floor inside the trailer. He fractured both kneecaps.
2019-06-25HazlehurstGeorgiaThompson Hardwoods, Inc.Multiple body partsContact with hot objects or substances
An employee was operating a loader with a grapple attachment to unload tree logs from a truck when he noticed the temperature indicator light flashing. The employee turned off the loader and waited a few minutes to let the engine cool off. Next, the employee started to remove one of the radiator caps on the loader. As he started removing the cap, hot water and steam released from that area, striking the employee. He sustained third degree burns to his left wrist, left arm, and left side torso.
2019-04-24Altamonte SpringsFloridaMACY'S, Inc.Knee(s)Trip without fall, n.e.c.
A maintenance employee was working on the roof. He was walking down the fixed stairs from the cooling tower when he missed a step and both his knees gave out. He caught himself on the rail and did not fall. He suffered from torn tendons behind both kneecaps, requiring hospitalization and surgery.
2019-02-04Rice LakeWisconsinRice Lake Glass and Door Co., Inc.Lower leg(s)Struck by falling object or equipment, n.e.c.
On February 4, 2019, an employee was removing a sheet of aluminum from a pile of aluminum (~ 4 feet x 10 feet) when the aluminum sheets fell on the employee. The employee was pushed into a rack and pinned. Both legs were broken just under the knee caps.
2018-09-20BeaumontTexasSAIA Motor FreightKnee(s)Other fall to lower level less than 6 feet
An employee fell backwards while exiting from a trailer. His right knee hit the tongue-side of a dolly below, before he fell to the ground. He fractured both kneecaps and suffered tendon injuries in both knees.
2018-08-27LongviewTexasGlobal Vessel and TankNonclassifiableOther fall to lower level 16 to 20 feet
An employee was placing caps on the tank openings. A forklift struck the tank and the employee fell about 20 feet to the ground below. The employee's fall protection was not attached to the anchorage point.
2018-08-06BryanTexasHASA IncFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was working at the capping station on a bottling line when some caps fell off the automated capper onto the moving conveyor belt and were caught under the guard. The employee was attempting to retrieve the caps when her right ring fingertip was amputated.
2018-08-06GranburyTexasFluor Corp.Leg(s)Injured by slipping or swinging object held by other person
A boat had capsized and 300 pounds of dead fish were on a shoreline. Employees were gathering the dead fish inside heavy-duty trash bags. A fish fin punctured through its bag while being carried by a coworker and struck the injured employee's leg. The employee's leg became swollen and the employee experienced a high temperature, requiring hospitalization.
2018-05-02PearlandTexasPackaging Service Co., Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was manually helping a production line lead at a capper machine apply caps to bottles of windshield washer fluid when he noticed that a cap had fallen into the machine's chain and sprocket. He was attempting to remove the cap when the chain and sprocket amputated four of his right fingers. The machine was guarded at the time.
2018-03-14WaterburyConnecticutLuvata Waterbury, Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was operating a die stringer machine when his right hand entered the area between the die holder and the capstan. A wire then pulled the employee's middle fingertip, resulting in an amputation. The area between the die holder and the capstan was unguarded at the time of the incident.
2018-01-23Cape CanaveralFloridaIndian River Beverage CorporationFingertip(s)Caught in or compressed by equipment or objects
An employee was cleaning a filling machine when he observed defective caps locked in the supply channels to the capper. He put the capper in manual mode and manually moved the joint with his left hand as he tried to remove the crowns with his right hand. During this operation, one of his fingers entered the moving machine, severing his fingertip.
2017-09-20LongwoodFloridaMacrocap Labs, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery
An employee was working on an encapsulation machine when a part closed on his finger. When he tried to remove his finger, skin and tissue were removed, requiring overnight hospitalization and surgery.
2017-08-03SlatersvilleRhode IslandSilgan Dispensing Systems Slatersville, LLCFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was pushing a box of plastic caps through the traffic arm on a conveyor system, which opened to allow the box to pass. The employee had his other hand resting on top of the hinged component of the traffic arm and as the arm moved, it pinched and amputated his finger. The traffic arm was unguarded at the time.
2017-07-27Cape GirardeauMissouriOzark GasNonclassifiableIgnition of vapors, gases, or liquids
An employee had been removing valve caps from acetylene cylinders using an electric drill equipped with an attachment. Acetylene gas was ignited by a spark and the employee was hospitalized for burns.
2017-07-08San AntonioTexasCribley Enterprises, Inc. Leg(s)Injured by slipping or swinging object held by injured worker
An employee was using a saw with a masonry blade to cut concrete caps to put on a modular brick wall. When he bent over to make a cut, the saw blade lacerated his left leg, requiring hospitalization.
2017-05-11MiamiFloridaMiami Country Day SchoolKnee(s)Fall on same level due to tripping over an object
An employee tripped over a table and fell, fracturing both of her kneecaps.
2017-05-08TupeloMississippiEXPRESS SERVICES, INC.Toes(s), toenail(s)Compressed or pinched by shifting objects or equipment
An employee was removing bearing caps from a skip hoist when the door slid and trapped his right foot between a brace and the door, amputating his big toe and possibly amputating the remaining four toes.
2017-04-28TonawandaNew YorkMueller Services, LLCKnee(s)Other fall to lower level
An employee was walking up the stairs when his knee popped and gave out. He fell back down the stairs, breaking both kneecaps and tearing a tendon.
2017-04-24BaytownTexasChili's Bar & GrillArm(s)Contact with hot objects or substances
An employee was changing out a capsule of dish detergent in the dish machine when product spilled onto his arms. The employee sprayed hot water onto his arms to get the soap off resulting in thermal burns to both arms.
2017-02-15New LondonConnecticutThames Shipyard & Repair Co., Inc.Fingertip(s)Compressed or pinched by shifting objects or equipment
On February 15, 2017, an employee was working cables for dry dock spray curtains with a capstan. His left index finger was caught in the cable where it meets the drum, amputating his fingertip.
2017-02-02East RutherfordNew JerseySun Chemical IncBrainOther fall to lower level
An employee fell from a tanker while changing the caps, suffering a head injury.
2016-05-12ColumbusOhioScioto Services, LLCKnee(s)Fall on same level due to slipping
An employee slipped on floor stripping chemical and fell to their knees. The chemical seeped into their pants resulting in third degree burns to the knee caps.
2016-04-01ValdostaGeorgiaLetica CorporationFingertip(s)Caught in running equipment or machinery during regular operation
An employee was adjusting plug tints/caps on an automatic installer machine when the machine's installing head cycled and amputated the employee's left middle fingertip.
2016-03-14TampaFloridaParagon SystemsKnee(s)Fall on same level due to tripping
An employee was running to help a coworker when he tripped and fell to the cement on his knees, fracturing both kneecaps.
2016-03-08Point ClearAlabamaPCH Hotels and Resorts, Inc.BODY SYSTEMSExposure to environmental cold
Two employees got on a jet ski to rescue a guest that had capsized. During the rescue operation, a wave capsized the jet ski and caused it to break down. One of the employees suffered hypothermia after being immersed in the 55-degree water for several hours.
2016-03-08OakwoodTexasBarrilleaux, Inc.Jaw, chinStruck by dislodged flying object, particle
An employee was using a pressure washer to clean a forklift. The pressure washer lost pressure, so the employee walked around the pressure washer to try and see what was wrong. At that time, the "caps" blew off of the heater element on the pressure washer, striking the employee in the jaw and fracturing it.
2015-12-10MorgantownWest VirginiMylan PharmaceuticalsFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was troubleshooting an encapsulation machine and bypassed the safety interlock. The employee's hand was caught in moving parts while troubleshooting resulting in the partial amputation of the left middle finger from the tip to the second joint.
2015-12-06BethelConnecticutSandvik Materials, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was untangling a wire tangle at the capstan. The employee tried to cut the tangle when his left hand got caught in the ball of wire, amputating two fingers. The machine was still in operation at the time.
2015-12-05MckinneyTexasEncore Wire CorporationFingertip(s)Caught in running equipment or machinery during regular operation
An employee was operating a rigid cable machine when his left hand got caught between a wire and a capstan sheave. While attempting to free his hand, he amputated his left middle and ring fingertips.
2015-07-21WheatlandPennsylvaniaJMC Steel GroupFinger(s), fingernail(s)Struck against moving object or equipment, n.e.c.
An employee was working on a pipe-threading machine, placing caps on the end of a pipe. The employee's finger caught the sharp edge of the pipe and was severely lacerated. The employee was hospitalized.
2015-04-01BeaumontTexasBailey-Buchanan Masonry, Inc.Knee(s)Fall through surface or existing opening
An employee climbed onto a scaffold to place his tools on the wall. He reached a section on the scaffolding where he needed to stretch to reach and removed the guarding at the end frame. When he went back to work in the area, he fell through the unguarded section, breaking his knee caps.
2015-03-25MaconGeorgiaCherokee Brick and Tile CompanyFingertip(s)Entangled in other object or equipment
An employee was using a capstan and rope. The rope got caught, and the employee attempted to untangle it. The employee's hand was caught between the rope and the capstan spool while wearing a glove. His fingertip was degloved.