Date | City | State | Employer | Body Part | Event |
---|---|---|---|---|---|
2021-11-18 | Ball Ground | Ga | Awnex, Inc. | BODY SYSTEMS | Direct exposure to electricity |
An employee was welding aluminum brackets. The wires on the welding machine melted and a wire struck the employee's hand, shocking her. | |||||
2021-11-10 | New York | Ny | Tru-Val Electric | Ankle(s) and leg(s) | Struck against stationary object or equipment while rising |
An employee was on a boom lift, guiding cable through riser brackets. The arm of the boom lift hit a fence, causing the lift to spring upward. The employee's right foot was in the fixed foot pedal control, and he suffered a compound fracture to the ankle and lower leg. | |||||
2021-10-16 | Shawano | Wi | Aarrowcast, Inc. | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
At 7:00 a.m. on October 16, 2021, an employee was troubleshooting a machine. The top part cylinder became detached from the machine's top part frame, leaving a gap. The machine then cycled while the employee's right hand was between the cylinder and the bracket. He suffered amputations to the index and middle fingertips. | |||||
2021-10-12 | Fort Payne | Al | Heil Environmental | Finger(s), fingernail(s) | Contact with objects and equipment |
An employee was installing an empty cylinder onto an assembly body support bracket. The cylinder slipped and caught the employee's left index finger against the bracket. The employee suffered an amputation just below the nail. | |||||
2021-10-11 | Hamilton | Oh | The Hydaker-Wheatlake Company | Fingertip(s) | Pedestrian struck by vehicle in roadway |
An employee was guiding the bucket of a backyard machine as it was being offloaded from the trailer on a residential street. The bucket caught the trailer as it was unloaded, causing the bucket to rotate and create a pinch point between the bucket mount (a steel bracket) and a hydraulic strut. The employee's left hand was caught between the top of the bucket and the hydraulic strut, and his index fingertip was amputated. | |||||
2021-09-14 | Houma | La | Stabil Drill Specialties, LLC | Thigh(s) | Other fall to lower level 6 to 10 feet |
Employees were at the facility to perform hurricane cleanup and repair. The frame of a pull-down overhead door had been blown out during the hurricane. An employee was mounting a board to a bracket of the frame to then install a temporary vinyl curtain. The employee was standing on a pallet that was attached to a forklift and was approximately 8-10 feet above the gravel ground. When the employee struck the overhead door, it came loose and struck him, causing him to fall from the pallet to the gr | |||||
2021-09-03 | Clarence | Ny | Kreher Enterprises, LLC | Fingertip(s) | Struck by falling object or equipment |
An employee was assembling an irrigation unit when a metal support bracket fell and pinched their right index finger against a metal bar. The fingertip was amputated at the first knuckle. | |||||
2021-08-01 | El Dorado | Ks | Walmart Supercenter | Leg(s) | Struck by falling object or equipment, n.e.c. |
An employee was leaving a building through a roll-up door. After she lifted it to go out, the bracket on the wall that held the spring for the door broke. The door came down on her leg and fractured it. She was hospitalized and required surgery. | |||||
2021-06-30 | Nashua | Nh | UPS | Eye(s) | Vehicle struck by falling or flying object-roadway |
An employee was driving a vehicle down a dirt road when a windstorm caused tree branches to come down all over the road. A branch struck a mirror bracket and glass broke. A piece of glass got into the employee's eye and lacerated the retina. | |||||
2021-06-08 | Strasburg | Oh | Tremcar USA, Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was unpacking two suspensions that were bolted together with a razor-sharp angle bracket. While the employee was using a box end wrench to unscrew the bolt, the suspensions shifted and caught the employee's right index finger. The fingertip was amputated behind the nail. | |||||
2021-06-03 | Mcville | Nd | Cenex Harvest States | Chest, except internal location of diseases or disorders | Struck by falling object or equipment |
An employee was loading and unloading grain when the swivel spout broke loose from the bracket and fell on the employee, resulting in hospitalization for broken ribs and a head abrasion. | |||||
2021-05-26 | Buffalo | Ny | Flower City Masonry, Inc. | Back, including spine, spinal cord | Other fall to lower level 16 to 20 feet |
On 5/26/2021, two employees were working from a scaffold platform that was supported by side arm brackets applying brick veneer at a construction site. The employees fell approximately 20 feet when a bracket became dislodged from the frame. The injured employee suffered a back injury. The second employee was able to grab hold of the scaffold to keep from falling. | |||||
2021-05-21 | Central Square | Ny | National Grid | Tooth (teeth) | Struck by object or equipment |
An employee was standing next to a directional drilling machine when a plastic bracket from the drill struck the employee in the face causing three broken teeth and mouth lacerations. | |||||
2021-05-20 | Dalton | Ga | United Weavers of America, Inc. | Multiple body parts | Other fall to lower level |
An employee was retrieving carpet rolls from a shelf located about nine feet above the ground while standing on a platform that was raised on the forks of a forklift in order to reach the shelf. Two of the platform brackets broke off causing the platform to tilt to one side. The employee lost balance and fell onto the concrete floor, resulting in a fractured left leg and a concussion. The employee was hospitalized. | |||||
2021-05-17 | Paragould | Ar | DRiV Automotive, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was troubleshooting a stamper machine. The part-sensing proximity switch was malfunctioning. The employee reached through the part access opening in the guard to adjust the proximity switch bracket. The machine cycled, causing the employee's left middle finger to be pulled between the arbor and the embossing stamper. The finger was amputated between the first and second knuckles. | |||||
2021-05-04 | Green Bay | Wi | Schneider National Carriers Inc. | Finger(s), fingernail(s) | Contact with objects and equipment |
An employee was removing a brake chamber from a truck when it expanded and pinched his finger between the brake chamber and a bracket on the truck, resulting in a partial amputation of the left pinky finger. | |||||
2021-03-31 | Bath | Me | Bath Iron Works | Multiple body parts | Fall on same level due to tripping over an object |
The employee was performing pipefitting duties when they tripped and fell over a bracket on the floor of the inverted hull section, injuring their ankle and back. | |||||
2021-03-16 | Lenexa | Ks | DH Pace | Heel(s) | Other fall to lower level 6 to 10 feet |
An employee was removing brackets from an overhead door while standing two rungs from the top of a 10 ft. ladder. When the employee removed the last bracket the overhead door shifted and the employee fell off the ladder to the ground. The employee sustained fractures to the heels of both feet. | |||||
2021-03-16 | North Charleston | Sc | American Bureau of Shipping | Eye(s) | Water vehicle incident, n.e.c. |
Two employees were inspecting separate sides of a void tank in a ship. When one of them stood up from a squat, his glasses slid down his face and his eye and right brow struck a protruding piece of a metal bracket. He suffered a cut to the brow and an eye injury from the bracket piece. | |||||
2021-03-10 | Baton Rouge | La | WATCO TRANSLOADING LLC | Wrist(s) | Contact with objects and equipment |
An employee was adjusting an overhead door spring. He struck part of the door spring or bracket and suffered a wrist laceration that required hospitalization for surgery. | |||||
2021-03-06 | Kalida | Oh | Kalida Manufacturing Inc. | Multiple body parts | Ignition of clothing from controlled heat source |
An employee was MIG welding a repair on a bracket. Her shirt caught fire, causing second-degree burns to her stomach, chest, and neck. | |||||
2021-02-24 | Baytown | Tx | Optimized Process Designs, LLC | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
A forklift operator was instructing another employee where to secure a load of pipe. A pipe in the load shifted, pinching the operator's thumb between the pipe and cab mounting bracket on the forklift. The employee sustained a partial amputation of the right thumb above the top knuckle. | |||||
2021-02-09 | Austin | Tx | Capital Concrete, LLC | Nonclassifiable | Other fall to lower level 6 to 10 feet |
An employee was stripping a metal and concrete form when the bracket they were harnessed to failed and the employee fell 4-6 feet to the ground, resulting in injuries and possible hospitalization. | |||||
2021-01-19 | Buffalo | Ny | Buffalo Wire Works | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was reassembling the screen support roller onto a pillow block. He connected the left side to the pillow block and then went to ensure that the right side of the pillow block was still connected. While doing so, the left side of the roller fell back out, pinching his finger between the roller and the support angle bracket and causing a laceration to the ring finger. | |||||
2021-01-15 | Norwalk | Oh | Borgers Ohio, Inc. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
On January 15, 2021, an employee was pushing a bed plate (for a textile production line's needle loom) into place. The bed slid in quickly, and his finger was caught in a shear point between it and a mounting bracket. He suffered a partial amputation to the finger. | |||||
2020-10-19 | Kissimmee | Fl | Progressive Plumbing, LLC | Thigh(s) | Other fall to lower level 6 to 10 feet |
An employee was on an A-frame ladder marking locations for brackets to hold plumbing pipes in the ceiling and wall. The employee was about 8 feet high on the 12-foot ladder when he lost his balance while reaching to mark a location for a bracket and fell from the ladder onto the floor. The employee injured his face, eyes, shoulders and sustained a broken right femur. | |||||
2020-10-02 | Daytona Beach | Fl | MasTec Advanced Technologies | Hand(s) | Contact with objects and equipment |
An employee was dismounting a TV from a wall mount at a customer's residence when his left hand was lacerated by the TV and/or the bracket on the wall. The employee required surgery. | |||||
2020-08-27 | Temple | Tx | Baylor Scott & White Health System | Multiple body parts | Fall from collapsing structure or equipment |
An employee was standing on a desk when it collapsed. As she fell, her mouth hit a metal bracket from the broken desk. She suffered lacerations to the inside and outside bottom lip, broken teeth, and a broken left foot. | |||||
2020-08-04 | Houston | Tx | Pyramid Masonry & Construction, Inc | Multiple body parts | Other fall to lower level 6 to 10 feet |
While at a construction site, an employee fell from a scaffold's side bracket platform that was approximately 7'4" off the concrete flooring, sustaining fractures to their skull, arms, and wrist, as well as a laceration to the skull. | |||||
2020-07-30 | Oak Park | Illinois | Evans Electric LLC | Multiple body parts | Direct exposure to electricity |
An employee was walking between a transformer and wall-mounted, lead-jacketed secondary cable. His right shoulder brushed against the cable and his left elbow touched the transformer bracket, causing an arc flash. He suffered first- and second-degree burns to the left arm and the left chest area. | |||||
2020-07-26 | Longview | Texas | Norris Cylinder Inc | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was troubleshooting limit switches using an electrical meter. One of the switches tripped and activated a magnet to retract, which caught his finger between the magnet and a switch bracket. His left pinky finger was partially amputated, below the first knuckle. | |||||
2020-07-20 | Hesston | Kansas | King Construction Company Inc | Forearm(s) | Struck by object or equipment |
An employee was using a boom lift to access and install a light bracket on the side of a bridge. The bracket came loose and struck the employee causing injury to the forearm that required surgery and hospitalization. | |||||
2020-07-11 | Naples | Florida | Revolution Erecting LLC | Nonclassifiable | Struck, caught, or crushed in other collapsing structure or equipment |
Two employees were installing pre-cast concrete floor panels. The concrete floor panels collapsed onto the lower floor when the brackets and/or screws that secured the brackets into the wall failed. Both employees were hospitalized with blunt force trauma injuries. | |||||
2020-07-10 | Hinckley | Ohio | Xtreme Elements LLC | Trunk | Other fall to lower level less than 6 feet |
An employee was in the process of exiting a scaffold when he lost his balance and fell approximately 3 to 3.5 feet to the ground below. During the fall, he struck a scaffold bracket. The employee suffered bruised ribs and possible internal bleeding. | |||||
2020-07-01 | Longview | Texas | Patriot Process Equipment Inc. | Fingertip(s) | Struck by object or equipment |
An employee was installing a 10-foot long pipe to a new separator. The pipe came loose and struck the employee's thumb against a support bracket. The thumb tip was medically amputated. | |||||
2020-06-24 | Chillicothe | Ohio | Paccar, Inc. | Fingertip(s) | Caught in or compressed by equipment or objects |
While moving a frame rail from left to right, an employee's finger was pinched between the frame rail bracket and a J-hook. The employee's right ring fingertip was amputated. | |||||
2020-06-20 | Grapevine | Texas | Great Wolf Lodge of Grapevine, LLC | Eye(s) | Struck by swinging or slipping object, other than handheld, n.e.c. |
An employee was installing a new damper actuator on an air handler unit. He was using a cordless impact driver while working from a step ladder. While driving a self-tapping screw into a bracket, the screw bound up in the bracket causing the bracket to spin. The bracket knocked off the employee’s prescription safety glasses and struck his right eye. | |||||
2020-06-16 | Avon Lake | Ohio | FORD MOTOR COMPANY, OHIO ASSEMBLY PLANT | Finger(s), fingernail(s) | Injured by slipping or swinging object held by injured worker |
An employee was working on a trim side winder line and was attempting to secure two tether brackets using a secure gun. The employee was using the secure gun while holding the bracket when the bracket spun and struck the breakaway gloves, causing them to break but still catch the employee's finger and cause a compound fracture to the finger. | |||||
2020-06-12 | Bay Lake | Florida | CCK Construction Services, Inc. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
A carpenter was stripping column forms when his right middle fingertip was pinched between the brackets on the hinge side. The fingernail and skin on the fingertip were removed and the bone was fractured. | |||||
2020-06-01 | Oxford | Ohio | Jesse Baker Construction | Arm(s) | Other fall to lower level 6 to 10 feet |
An employee was removing brackets from an exterior wall. The ladder he was using slipped out from under him and he fell to the tile floor about 6 feet below. He suffered a broken arm and was hospitalized. | |||||
2020-05-18 | Aspen | Colorado | KOLBE STRIPING, INC. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was setting highway cones on pavement from the back of a cone/attenuator truck. As the employee finished setting the cones, he placed his hand on the support bracket of the truck-mounted attenuator. At the same time, the driver of the cone truck began to retract the attenuator. The employee's right middle fingertip was then caught and smashed between the attenuator and the support bracket, resulting in a partial fingertip amputation. | |||||
2020-05-18 | Blue Bell | Pennsylvania | SavATree, LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was in the process of tightening a winch line when his right index fingertip was severed between the winch line and a bracket. | |||||
2020-04-29 | Orlando | Florida | Pepsi Beverages of North America | Ankle(s) | Contact with objects and equipment |
An employee was working around a can line conveyor when his left leg lower extremity made contact with a metal bracket mounted to the can line conveyor, resulting in a laceration to his left Achilles tendon. He was hospitalized and had surgery. | |||||
2020-04-28 | Lamar | Colorado | Dragon Products, LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was bolting a support leg onto the bottom of a trailer. The front of the trailer was lifted slightly in order to insert the leg mounting bracket into position under the trailer mounting bracket. Once in position and after being lowered, the two brackets can be bolted together. The employee's left hand was on the back side of the support leg and his thumb tip was amputated in a pinch point between the two brackets while the trailer was being lowered. | |||||
2020-04-23 | Chicago | Illinois | Illinois Institute of Technology | Neck, except internal location of diseases or disorders | Struck against stationary object or equipment while rising |
On April 23, 2020, at 2:40 PM, an employee was performing maintenance under an air handler unit. When the employee stood up, an iron bracket cut the back of the employee's neck. | |||||
2020-04-21 | Hurst | Texas | CPC Logistics, Inc. | Nonclassifiable | Caught between rolling powered vehicle and other object |
An employee had just disconnected a tractor/trailer and exited the truck to put in a support bracket that sits under the nose of the trailer. His tractor rolled backwards and pinned him between the trailer and the back of the tractor. He sustained lacerations. | |||||
2020-03-31 | Bristol | Florida | Apalachee Pole Company | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was replacing a wheel on a kiln cart. He was aligning the wheel with the wheel bracket when the wheel dropped down and pinched his left middle finger, amputating 1/3-inch from the fingertip. | |||||
2020-03-10 | Scottsboro | Alabama | Maples Industries, Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was operating the crosscut machine, which uses table extensions for cutting larger rugs. To unfold a table, the employee pushed in the left bracket and then went to push in the right bracket. When he pushed in the bracket that is underneath the table, the extension came down, catching his fingertip between the middle and right table extensions. This resulted in a partial amputation and a fracture to the fingertip. | |||||
2020-02-28 | New Castle | Delaware | AMERICAN BRIDGE COMPANY | Head and trunk | Struck by swinging or slipping object, other than handheld, n.e.c. |
A crew of ironworkers was disassembling am 1,100-pound steel jacking frame using chain hoists. The upper section of the frame freed from the upper bracket and the load became unstable, swung free, and knocked an employee to the ground. The employee suffered a concussion and lacerations to the kidney and pancreas. | |||||
2020-02-27 | Orlando | Florida | Skanska-Granite-Lane A Joint Venture | Finger(s), fingernail(s) | Struck by object or equipment dropped by other person |
Two employees were removing an overhang bracket. One employee was holding the bracket while another employee was using an air impact wrench. The socket slipped off the nut causing the wrench to drop down and strike the employee's first finger on the right hand causing an avulsion between the second and third knuckle. | |||||
2020-02-21 | Peoria | Illinois | Dan Waibel Designer Builder, LLC | Multiple body parts | Other fall to lower level 11 to 15 feet |
An employee was dismantling a scaffold while working on an elevated platform that was lifted on the forks of a telehandler forklift and was equipped with a steel guardrail system. The employee was working from one side of the platform and slid a 24-foot aluminum scaffold platform from the wall bracket onto the top of the guardrail. The scaffold platform pivoted on the guardrail and fell 12 feet to the ground below. The employee was holding onto the platform as it fell and was ejected from the pl | |||||
2020-02-13 | Schiller Park | Illinois | Gate Gourmet, Inc. | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was operating a forklift with a mule attachment. The metal frame of the mule came off the metal bracket on the forklift. As the employee attempted to adjust it, his pinky finger was pinched between the metal bracket on the forklift and the metal mule frame. The top one-third of the employee's pinky finger was amputated. | |||||
2020-02-12 | Rockford | Illinois | Gunite Corporation | Leg(s) | Caught in or compressed by equipment or objects |
An employee was setting filters in molds in a molding machine. The employee's leg was pinched and broken between the foundry mold carriage and a roller bracket. | |||||
2019-09-17 | Scott City | Kansas | Fairleigh Feed Yard | Finger(s), fingernail(s) | Struck by or caught in swinging door or gate |
An employee was helping process cattle into a chute. While the employee was waiting for the next cow to come into the chute, the back gate was opened and the employee's finger was pinched between it and the bracket. The employee suffered a partial amputation. | |||||
2019-09-11 | Atlanta | Georgia | BA Barrett Construction Company | Leg(s) | Struck by rolling object or equipment being pushed by injured worker |
An employee was removing a 6-foot section of duct when the duct rolled off the support bracket and onto his right leg, fracturing it. | |||||
2019-08-27 | Middlefield | Connecticut | Textron Specialized Vehicles Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was replacing a starter generator bracket on a gas-powered golf cart. This required removal of the starter. He removed the seat to gain access to engine compartment and knelt on the floorboard of the car to get into position to perform the task. He loosened the starter generator adjustment bolt so that the starter generator belt could be removed. After loosening the adjustment bolt, he began to pull the belt off the front pully on the starter generator. At the same time, his knee pre | |||||
2019-08-20 | Northbrook | Illinois | UL LLC | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting an aluminum bracket with a miter saw when the bracket pinned his finger up against the backstop, resulting in fingertip amputation. | |||||
2019-08-15 | Brooklyn | New York | Jen-Mar Electric Service Corp. | Wrist(s) | Other fall to lower level |
An employee was on a 10-foot A-frame ladder, cutting steel brackets that held a wooden dock to a cement pier. One of the brackets hit the ladder and the employee fell, suffering a broken wrist. | |||||
2019-08-12 | Cicero | New York | J and R LAWNS & LANDSCAPES, INC. | BODY SYSTEMS | Direct exposure to electricity |
An employee was cutting metal brackets while wearing wet gloves and was shocked. The employee was hospitalized. | |||||
2019-08-05 | Galena Park | Texas | United States Gypsum Co. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
Two employees were removing a motor from an overhead bracket and turned to lower it to the floor. As they were lowering it, one of the employees had his left middle finger caught and crushed between the motor and a 12-inch chute. The employee sustained amputation of the distal phalanx. | |||||
2019-07-29 | Van Buren | Arkansas | Fusion Power, LLC. | BODY SYSTEMS | Direct exposure to electricity, 220 volts or less |
An employee working in climbing gear was installing a new ground wire on a power pole. He made contact with a bracket for a security light, which was energized because the photo controller was improperly wired. After making contact, he donned "secondary" gloves and continued working. About 20-30 minutes later he lost consciousness and stopped breathing. He was hospitalized with cardiac arrest. | |||||
2019-07-13 | Cordele | Georgia | GFMCO, LLC | Leg(s) | Struck by falling object or equipment, n.e.c. |
An employee was making a repair to a forklift. The tines of the forklift were elevated in order to access the brackets at the bottom of the backrest. While the employee was loosening one of the brackets, the backrest and tines fell off the forklift, striking the employee's back, legs, and feet. The employee was hospitalized with a fractured left leg that was broken in two places and a laceration to the right foot. | |||||
2019-07-08 | Fort Worth | Texas | Basic Energy Services | Nonclassifiable | Ignition of vapors, gases, or liquids |
An employee was welding on a pipe bracket between a pumphouse and tank batteries at a salt water disposal site. A flash fire burned the employee. | |||||
2019-07-02 | Norfolk | Virginia | GENERAL DYNAMICS INFORMATION TECHNOLOGY | Lower leg(s) | Fall on same level due to tripping |
At approximately 9:30 a.m. on July 2, 2019, an employee was walking on a ship cableway located on the port side of the space en route to the port forward corner of the space when he tripped on the cableway and fell. As he fell, his calf impacted and was impaled by a U-channel bracket that was holding up the raceway. He was hospitalized. | |||||
2019-06-08 | Denver | Colorado | JSM and Associates, LLC | Finger(s), fingernail(s) | Struck by falling object or equipment |
An employee was trying to install a motor when the motor slipped and he tried to catch it. His fingers were pinched between the motor and the bracket, partially amputating two fingers. | |||||
2019-05-30 | Orlando | Florida | SGL Constructors | Finger(s), fingernail(s) | Struck by falling object or equipment, n.e.c. |
Two employees were working from an aerial lift about 10 feet off the ground. One employee was taking off a bracket to remove an overhead wood platform. The platform fell and pinned the other employee's pinky finger against the lift's rail resulting in the amputation of the employee's pinky finger. | |||||
2019-05-20 | New York | New York | TEC Building Systems, LLC | Multiple trunk locations | Contact with hot objects or substances |
An employee was on a ladder troubleshooting a faulty CO2 sensor. As she was removing the existing mounting bracket, a hot water pipe became dislodged due to corrosion and sprayed her with hot water, causing her to dismount the ladder and fall on the floor. She suffered hot water burns on her upper and lower back and left ribs, as well as bruises from the fall. | |||||
2019-04-02 | Brodhead | Wisconsin | Stoughton Trailers, LLC | Fingertip(s) | Caught in or compressed by equipment or objects |
An employee grabbed a stop bracket to pull himself across while underneath a trailer tightening up rear-frame attaching bolts. His left middle fingertip was caught between the rear frame and stop bracket, resulting in a fingertip amputation. | |||||
2019-03-02 | Tampa | Florida | Blue Light Contractors, Inc. | Hand(s) | Other fall to lower level |
An employee was walking on stilts installing metal frames in the ceiling. He stepped on a piece of insulation which caused him to lose balance and fall. A bracket on the wall cut tendons in his hand that required surgery. | |||||
2019-02-26 | Buckhannon | West Virgini | Oil States & Energy Services, LLC | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
On February 26, 2019, at approximately 1:00 p.m. a tool maintenance employee was prepping an isolation tool when a cup-shaped portion of the tool became caught on a bracket. The employee attempted to free the cup and the employee's left middle finger was caught in the hole of the cup and amputated. | |||||
2019-02-26 | Antigo | Wisconsin | Plaspack U.S.A., Inc. | Nonclassifiable | Caught in running equipment or machinery |
On February 26, 2019, at approximately 12:15 p.m., an employee at Plaspack U.S.A., Inc. was cleaning the rubber rollers on a knitter machine when a chain and sprocket located above the floor grabbed her clothes and pulled her into a rotating shaft bracket. The employee sustained crushing injuries to the top of her legs and a puncture wound. | |||||
2019-02-25 | Frostproof | Florida | Lemon X corporation | Foot (feet) and ankle(s) | Part of occupant’s body caught between vehicle and other object in nonroadway transport incident |
An employee was operating a stand up forklift and contacted the closing brackets on the corrugated baler machine. His left leg was caught between the forklift and the baler causing a fracture and laceration to his ankle and foot. The employee was hospitalized. | |||||
2019-02-13 | Colwich | Kansas | Musselmand & Hall Contractors LLC | Leg(s) | Struck by falling object or equipment, n.e.c. |
A worker was positioning the forks on a back hoe when one came loose from the bracket, fell and hit his left leg resulting in left leg fracture. | |||||
2019-02-07 | Pelham | Alabama | Forterra Pipe and Precast | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was working to remove the side forms from a 72" bulb tee line. He was unhooking the forms from a jack using lifting devices and steel pins. As he pulled the pin from the lifting device with his right hand, he attempted to push the pin with his left hand. His left index finger then entered the hole on the form brackets. The jack operator then lifted the device from the form, catching the employee's left index finger in the hole on the bracket. He suffered a left index fingertip amputa | |||||
2019-01-29 | South Jacksonville | Illinois | Maines Paper & Food Service - Chicago, Inc. | Abdomen, except internal location of diseases or disorders | Other fall to lower level |
On January 30, 2019, at approximately 4:27 PM, an employee was exiting his tractor-trailer at the truck stop, slipped on an icy L bracket on the truck and fell. He proceeded to disconnect the trailer. While cranking down on the legs of the trailer, which were frozen because of the temperature, he felt pressure and heard a pop. The employee was hospitalized for a hernia. | |||||
2018-09-18 | Saint Augustine | Florida | Heart Utilities of Jacksonville, Inc. | Hand(s) | Direct exposure to electricity, greater than 220 volts |
An employee was installing trip savors on an electrical line (13,200 volts) from an aerial lift when he attempted to tighten a bolt on a switch bracket using a cordless drill. An arc flash then occurred, resulting in second degree burns to both of his hands. He was hospitalized. Rubber gloves were not worn at the time of the incident. | |||||
2018-09-11 | Wichita | Kansas | FEDEX FREIGHT | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was changing out an air bag on a trailer when the bag came free and pinched the employee's left index finger between the bag and a bracket on the trailer, resulting in a fingertip amputation to approximately the base of the nailbed. | |||||
2018-08-20 | Meriden | Connecticut | Bob's Store Warehouse | Lower leg(s) | Compressed or pinched between two stationary objects |
An employee was on a trailer at a loading dock helping to load some bags of merchandise when his foot went into the gap between the dock plate and the bay door, lacerating his left shin on the side of the bumper metal bracket that required stitches. | |||||
2018-08-19 | Columbus | Ohio | Kokosing Construction Company Inc. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was handling a concrete road barrier when an automated lifting bracket moved and crushed the employee's fingers, resulting in amputation injuries. | |||||
2018-08-15 | Trenton | Illinois | KMK Metal Fabricators, Inc | Arm(s) | Caught in or compressed by equipment or objects |
An employee was cleaning debris around a laser cutting table with an air hose when the table shifted and he was caught between the bracket arm of the cutting device and a portion of the table. He suffered a laceration and fractured arm, requiring hospitalization. | |||||
2018-07-13 | Wellington | Florida | Wilco Electrical, LLC | Nonclassifiable | Direct exposure to electricity, greater than 220 volts |
A lineman was working on a switch from a bucket, covering electrical power lines with blankets and sleeves. As he reached for a jumper, his sweat-soaked shirt touched a hot jumper at the right arm while his left sleeve touched the switch bracket. A flash occurred, and he suffered first- and second-degree burns. | |||||
2018-07-12 | Fort Lauderdale | Florida | Volt Power LLC | Head and trunk | Direct exposure to electricity |
An employee cut the wire of a lightning arrester. The hot wire then made contact with a metal bracket and a flash occurred, causing thermal burns to the employee's face and chest. | |||||
2018-07-10 | Holmesville | Ohio | Auria Holmesville, LLC | Thigh(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was guiding a leg assembly being lifted by a crane when the weld broke, allowing a bracket on the leg assembly to fall and scratch the employee's thigh. | |||||
2018-06-20 | Chatham | Massachusett | Chatham Shellfish Company | Fingertip(s) | Machinery or equipment incident on water vehicle |
An employee as pulling the motor out of the water into the locked position. When it didn't lock, the motor descended and the employee was pulled overboard pinching her right thumb between the motor and the clasp to the bracket. Her fingertip was amputated. | |||||
2018-06-12 | Fond Du Lac | Wisconsin | Sadoff Iron & Metal Co Inc | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was operating an overhead crane inching a hoisted cylinder into place on a material handler with their left hand placed on the cylinder. When the hoisted cylinder slid into place on the material handler, the tip of the employee's left middle finger was pinched between the cylinder and the material handler's stabilizer bracket and amputated. | |||||
2018-06-04 | New York | New York | STAT Fire Sprinkler Inc. | Finger(s), fingernail(s) | Contact with objects and equipment |
An employee was preparing to install sprinkler pipes. While installing the pipe brackets, the beam clamp snapped onto his right index finger crushing it and resulting in amputation. | |||||
2018-05-15 | Laurel | Mississippi | Howard Industries | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was disconnecting a hydraulic line from a cylinder that was being lifted from a core press by a crane. The cylinder then slipped from the cylinder bracket, and the employee's left little finger was pinched between the cylinder bracket and press core frame. The left little finger was amputated at the first knuckle. | |||||
2018-05-02 | Port Aransas | Texas | Oracle Elevator Holdco Inc. | Leg(s) | Caught in running equipment or machinery |
An employee was adjusting the selector on an elevator when the employee's right leg became caught and lacerated between the elevator cab and a rail bracket. | |||||
2018-04-19 | Broken Arrow | Oklahoma | Alfa Laval Inc. | Finger(s), fingernail(s) | Injured by slipping or swinging object held by injured worker |
An employee was using a hand-held drill to ream a hole in a sheet metal bracket held in a vice. The injured employee was attempting to remove a wire loop from the hole being drilled when his glove was caught in the bit. The glove pulled the middle finger on his left hand into the bit, causing cartilage and tendon damage that resulted in a finger amputation. | |||||
2018-04-05 | New Haven | Connecticut | Trelleborg Coating Systems, Inc. | Nonclassifiable | Struck by dislodged flying object, particle |
An employee was operating an idle roller. The brackets failed and the idle roller struck the employee, resulting in contusions. | |||||
2018-04-04 | Mansfield | Ohio | NEWMAN TECHNOLOGY, INC | Finger(s), fingernail(s) | Caught in running equipment or machinery |
An employee was making adjustments to a bender machine when the employee's right ring finger was pinched and amputated between the bender's carriage and bracket. | |||||
2018-04-04 | Gatesville | Texas | Attic Breeze, LLC | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a punch press to cut a bracket and amputated the left index finger. | |||||
2018-03-18 | Mechanicsburg | Pennsylvania | Fry Communications, Inc. | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was changing a roll of shrink wrap when his right pinky finger was smashed between the roll of shrink wrap and the bracket where the roll sits, resulting in an amputation to the first knuckle. | |||||
2018-03-02 | La Place | Louisiana | Cooper Consolidated, LLC | Hand(s) | Caught in or compressed by equipment or objects |
An employee was changing the air can on a crane swing drum when the drum turned and caught the employee's right hand between it and a beam bracket. The bracket runs across the drum. | |||||
2018-02-26 | Williamsville | New York | International Chimney Corp | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee was removing electrical conduit wrapped around a scaffold bracket when his finger was pinched between the conduit and scaffolding, resulting in an amputation. | |||||
2018-01-29 | Pecos | Texas | Willow Creek Co., LLC | Hand(s) and finger(s) | Caught in or compressed by equipment or objects |
An employee was securing a bell hook by wrapping a strap around the A-frame of a side boom when the operator moved the winch, causing the strap to fasten around the A-frame and the winch mounting bracket. The employee's left hand was then caught between mounting bracket and A-frame. The employee suffered a broken left hand, a ring finger compound exposure, and broken middle finger. | |||||
2018-01-18 | Westminster | Colorado | Rod Martin's Complete Basement Systems | Chest, except internal location of diseases or disorders | Struck by falling object or equipment, n.e.c. |
An employee was installing a bracket on top of a pier in a basement. As the top of the bracket was adjusted onto the pier, it bent and slipped off the pier, hitting and injuring the employee's chest. | |||||
2018-01-11 | Freeport | Texas | Zachary Industrial | Brain | Other fall to lower level 26 to 30 feet |
An employee was working at elevation, installing fitting support brackets on instrument air piping, when he fell 25 to 30 feet to the ground. He was tied off, but his fall protection disengaged about halfway down, allowing him to hit the ground. He suffered a fractured left forearm, multiple fractured ribs, a skull fracture, and a hematoma/brain bleed. | |||||
2018-01-05 | Omaha | Nebraska | Lozier | Finger(s), fingernail(s) | Contact with objects and equipment, n.e.c. |
An employee was standing on a step stool and locking out/tagging out an air valve on a bracket welder machine when her right second digit was caught between the frame and doors (guarding) on the back side of the machine. When she stepped down, her second digit fingertip was amputated to the first knuckle. | |||||
2018-01-03 | Greenwich | Connecticut | LA Home Builders, LLC | Leg(s) | Other fall to lower level 16 to 20 feet |
An employee was descending a carpenter bracket scaffold. The scaffold shifted and the ladder moved causing the employee to lose balance and fall 20 feet. The employee sustained a broken right leg. |