DateCityStateEmployerBody PartEvent
2021-08-27Pompano BeachFlThe TJX CompaniesHip(s)Fall while sitting
An employee attempted to sit on a shoe bench when she contacted the edge of the bench and fell to the floor, resulting in a fractured hip.
2021-08-12Franklin ParkIlNelsen Steel and Wire Company, IncorporatedFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating a drawing bench. The rollers caught the employee's shirt, then the glove on his right hand. The rollers then pulled in his hand, breaking four fingers.
2021-07-26North Little RockArHALL MANUFACTURING, LLCFingertip(s)Compressed or pinched by shifting objects or equipment
At about 7:40 a.m. on July 26, 2021, an employee was settling a bundle of four pieces of square tubing onto a workbench when the tubing shifted and slid onto his left hand and index finger. The finger was pinched and crushed between the tubing and a piece of channel on the workbench, causing an amputation to the fingertip above the nailbed.
2021-07-20Chippewa FallsWiAdvanced Laser Machining, Inc.Hip(s)Fall on same level, n.e.c.
On July 20, 2021, during a scheduled break time, a technical assembly employee went to kneel on the bench of an outside picnic table, missed the bench, and struck her knee against the concrete ground surface, resulting in a broken left hip. The employee was hospitalized for surgery.
2021-06-22MonroevillePaPartners For Quality IncChest, except internal location of diseases or disordersFall on same level due to tripping over an object
An employee became lightheaded while walking, tripped on a bench leg, and fell onto the bench, suffering five broken ribs on the right side.
2021-06-16LoganvilleGaTOMCO SystemsFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
Two employees were lifting a refrigeration unit's aluminum frame off a work table. The frame slid and pinched one employee's right middle fingertip against a bench. The last joint of the finger was amputated.
2021-06-15BenbrookTxShoot Smart Enterprises LLCHeadFall while sitting
An employee attempted to sit down in a chair, missed the chair and fell backward hitting their head on a vice that was mounted on the workbench.
2021-06-10KyleTxJoe Bland Construction, L.P.Multiple body partsStruck, caught, or crushed in other collapsing structure or equipment
Two employees were in an excavation with benching, installing conduit along its entire length. The trench collapsed and the bench wall struck one of the employees. The employee suffered a broken right wrist and rib fractures on both sides, as well as internal injuries. The employee was hospitalized.
2021-03-25LawtonOkAmerican Electric PowerFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was smoothing a metal plate using a bench grinder when the end of their thumb was caught between the material and the grinding wheel. The employee sustained a partial amputation (approximately 25 percent) of their left thumb.
2021-03-23ReedsvillePaAlltrista Plastics LLCFinger(s), fingernail(s)Struck by falling object or equipment
An employee was separating an injection molding tool. The employee hooked up one of the mold's two sides to overhead hoists and began to separate the mold. The other side (weighing 500 pounds) fell over and crushed the employee's left ring finger against a work bench.
2021-03-23Franklin ParkIlNelsen Steel and Wire Company, IncorporatedFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was using an overhead crane to load a bundle of hexagonal bars onto the conveyor belt of a die bench machine. When the employee unstrapped the bundle, a hexagonal bar moved and crushed the tip of his left thumb against another bar resulting in a fingertip amputation.
2021-03-22CentraliaIlBig 3 Precision Products IncFingertip(s)Caught in running equipment or machinery during regular operation
At about 10:15 a.m. on March 22, 2021, an employee was working with a part on a bench disk grinder. The disk caught the employee's left glove and pulled in the employee's middle finger, amputating the fingertip. The employee was hospitalized.
2021-02-04Fort LauderdaleFlFLORIDA POWER AND LIGHTShoulder(s), including clavicle(s), scapula(e)Other fall to lower level
An employee was in the rear of the property looking for an electric service handhole. The employee stepped onto a plastic stool bench in order to see over the fence. The employee lost his balance and suffered a puncture injury underneath the armpit from climbing spikes protruding from a communications pole.
2021-01-08North Little RockArL'Oreal USA, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
At 8:00 a.m. on January 8, 2021, an employee was turning over a magnetized plate on a metal workbench. The plate pinched the employee's right index finger, causing an amputation from the fingernail bed to the tip.
2020-10-19BoonevilleMsNew Way Trucks, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee placed a new bundle of metal tubing on a work bench. While the employee was removing the last steel strap, the bundle shifted and his finger was crushed between the tubes and the bench. The employee's left ring finger was amputated.
2020-10-15SalemWvOctane Environmenal, LLC.Multiple body partsOther fall to lower level 16 to 20 feet
The injured employee was working on a slip repair. He was standing on a sloped surface to spot for the articulating dump truck. A dozer was pushing dirt above and away from where the employee was spotting. A large dirt clod rolled from the dozer and struck the injured employee who slid down the sloped area approximately 15 feet and then fell over a benching of the hill that dropped approximately 5 feet onto the ground below. The employee suffered a fractured collarbone, hip, and pelvis and was h
2020-10-12HermonMeNtension CorporationFingertip(s)Caught in running equipment or machinery
An employee was removing tape from the bench welder when his hand was caught in the bench welder. The employee received finger fractures and lacerations, as well as a possible fingertip amputation.
2020-10-02LawrenceKsHaskell Indian Nations UniversityScalpNonroadway collision with object other than vehicle, n.e.c.
An employee was using an ATV to haul a trailer. While maneuvering between a building and a concrete bench, one of the trailer's tires got stuck on the bench, causing the employee to hit his head on the dashboard of the ATV. The employee sustained a cut on the top of his head.
2020-09-30Sheboygan FallsWiCurt G Joa, Inc.Fingertip(s)Struck by falling object or equipment, n.e.c.
The employee was working on a bearing assembly that was in a bench vise. As he was putting pressure on the part with a wrench to tighten it up, the part came out of the vise and started falling to the floor. The employee tried to catch it and pinched the tip of his finger between the falling part and the edge of the work bench resulting in a partial fingertip amputation.
2020-07-28ThorpWisconsinTHORP EQUIPMENT, INC.Cheek(s)Compressed or pinched by shifting objects or equipment
On July 28, 2020, an employee was moving a piece of steel on his workbench. The steel shifted and struck him in the face, lacerating his cheek.
2020-07-28CovingtonGeorgiaHopi Contracting Inc.Fingertip(s)Injured by slipping or swinging object held by injured worker
An employee was operating a bench disk sander. The sander amputated the tip of the employee's ring finger.
2020-07-27TopekaKansasWhite Star MachineryFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was lifting a hydraulic cylinder onto a bench vise for repairs. The vice rotated and the employee's left thumb was caught in a fitting hole. Then the cylinder rotated and caught the employee's thumb against the vise amputating the fingertip.
2020-05-29BiddefordMaineBarn Fresh Classics, LLC.BrainStruck by dislodged flying object, particle
An employee was using a pair of vice grips to hold a piece of metal that the employee was grinding on a bench grinder when the vice grips came loose and hit the employee in the head.
2020-04-27ClarkesvilleGeorgiaUnited Parcel ServicesChest, except internal location of diseases or disordersOther fall to lower level
An employee was on a deck delivering a package. He jumped onto a bench to get away from a dog, then lost his balance and fell from the deck to the ground, suffering broken ribs.
2020-03-11WilliamsportPennsylvaniaGeneral Cable Corp.Fingertip(s)Caught in running equipment or machinery, n.e.c.
At about 11:30 p.m. on March 11, 2020, an employee was setting up a drawbench machine to pull aluminum wire. The employee's right ring finger was caught between the wire and the capstan wheel, and the fingertip was amputated.
2020-01-20SanfordFloridaGator Dock & Marine IncForearm(s)Caught in running equipment or machinery during regular operation
An employee was drilling a 2-inch hole into a piece of aluminum when the employee's shirt sleeve became caught in the drill filing and pulled the employee's arm into the drill press bench. The employee was hospitalized with a fractured right forearm.
2020-01-08NeenahWisconsinBent Tubes LLCFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was clearing a sponge that had become stuck in a pneumatic bench-mounted launcher. The employee's hand got entangled in the machine's piston, causing a fingertip amputation.
2019-09-24WichitaKansasCapps Manufacturing, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was grinding a piece of metal on a bench grinder. His right hand was caught in the grinder and the thumb was amputated near the first joint.
2019-09-18OrlandoFloridaSiemens Energy, IncHip(s)Fall on same level, n.e.c.
An employee was carrying a 24-inch gasket on cardboard wrapped with plastic on the tips of his fingers. The wrapped gasket slipped out of his hand, and he struck a work bench and then fell to the floor. He suffered a fractured ball joint in his right hip.
2019-08-25WillistonNorth DakotaSchlumberger Technology CorporationFingertip(s)Caught in running equipment or machinery during regular operation
An employee was using a bench grinder to clean up 2-inch sub assemblies when his right index fingertip was caught between the grinder and the workpiece, resulting in a fingertip amputation at the knuckle.
2019-08-21LamontOklahomaJerry Dunkin, Inc. Lower leg(s)Struck by falling object or equipment, n.e.c.
Employees were at site to plug a well and were pulling casing from the well and laying them on a skid. An employee who was standing on a metal bench/stool lost his footing. The case fell off the rack and struck him in the right leg, breaking his tibia and fibula. He was hospitalized and had surgery.
2019-08-05AmarilloTexasTexas DodgeNonclassifiablePedestrian struck by forward-moving vehicle in nonroadway area
While being moved, a modified handicap vehicle with the pedals reversed, drove forward and an employee was pinned between the van and a workbench. The employee suffered crushing injuries.
2019-07-09PensacolaFloridaU.S. Dept of the Navy - Fleet Readiness Center Southeast CommandMultiple head locationsStruck by object falling from vehicle or machinery-other than vehicle part
On July 9, 2019, an employee was being trained to calibrate an oxygen test bench. He was lying on the floor under the bench during a simulated repair when a 40-pound counterweight's cable broke loose. The counterweight fell from 3 to 4 feet above the floor onto his head. He suffered a broken eye socket and possible skull fracture and was hospitalized.
2019-06-26KeeneNorth DakotaHalliburton Energy ServicesFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was assembling a wire line gun. His finger was pinched between the gun and a workbench causing an amputation to his right ring finger.
2019-05-13ScottsbluffNebraskaANDERSON AND SHAW CONSTRUCTION INCChest, except internal location of diseases or disordersFall from collapsing structure or equipment
An employee was starting to do work on a mobile scaffold when the scaffold fell over. The employee fell on a bench, suffering broken ribs and a collapsed lung.
2019-05-09RockfordIllinoisMARTIN AUTOMATIC INC.Fingertip(s)Struck by falling object or equipment
An employee was lifting a machine frame off of a welding bench and lowering it down to the ground. His fingers were under the frame to shift it when the frame fell and pinched his fingers, resulting in a fingertip amputation.
2019-03-18ClaremoreOklahomaBaker Hughes Oilfield OperationsFinger(s), fingernail(s)Struck by dislodged flying object, particle
An employee was using a crane when a strap attached to a work bench broke and whipped back, hitting the employee in the hand and amputating the right middle finger.
2019-03-12LaurelMississippiLaurel Machine and Foundry CompanyFoot (feet)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was lifting a piece of steel weighing approximately 100 lbs. onto the work bench utilizing a magnetic lifting device attached to a jib crane. When the employee began to move the piece of steel, it fell from the magnet and struck the employee's left foot. The employee was hospitalized for foot fractures.
2019-02-26HoustonTexasCharbonneau Industries, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery
At 10:05 a.m., on February 26, 2019, an employee was air operating an actuator. A valve that was lying/sitting on a table/work bench shut on the employee's right index finger, amputating it.
2019-02-14Bedford ParkIllinoisPactiv LLCFingertip(s)Compressed or pinched by shifting objects or equipment
Two employees were mounting a metal rod on a workbench mounted vice. The metal rod slipped from the vice and struck the tip of one employee's right ring finger causing a fingertip amputation.
2019-01-25ChicagoIllinoisSouthwest Spring Inc.Arm(s)Compressed or pinched by shifting objects or equipment
Two mechanics were working together on a spring assembly bench. A leaf spring being held by a hydraulic clamping system flipped, and the clamp caught and broke one mechanic's arm.
2019-01-09OssiningNew YorkLiRo GroupForeheadFall while sitting
An employee fainted while writing a report on a bench, suffering a laceration to the forehead.
2018-09-20WashingtonDistrict Of Berkel and Company Contractors, IncKnee(s)Jack-knifed or overturned, nonroadway
An employee was operating rig equipment to drill and install soldier piles. The rig was traveling to the next pile location when it encountered a soft spot on the bench. The employee immediately stopped on command from the spotter. The left side track of the rig then started to sink, causing the rig to tip over on its side. The employee's left leg struck the tramming levers and computer inside the cab when the rig tipped over, suffering two fractures below the knee.
2018-08-22PittsburghPennsylvaniaJefferson Regional Medical CenterLower leg(s)Struck against stationary object or equipment, n.e.c.
An employee was responding to a request for assistance for a sick patient in a cardiac rehab outpatient unit. The employee was running to get towels when the employee's knee struck a bench. The employee then fell backwards incurring additional injuries. The result was a fracture of the left tibia plateau, requiring hospitalization and surgery.
2018-07-29ReadingPennsylvaniaCarpenter TechnologyLeg(s)Struck or run over by rolling powered vehicle
While working at a maintenance workbench, an employee was struck from behind by an unattended golf cart. The employee suffered a contusion and left leg injury.
2018-07-26CactusTexasSwift Beef CompanyShoulder(s), including clavicle(s), scapula(e)Contact with objects and equipment
An employee was working on a split saw bench when the bench came down on him. He suffered a broken shoulder and laceration. There was no block in place at the time of the incident.
2018-07-25FindlayOhioWERK-BRAU CO., INC.Toes(s), toenail(s)Struck by falling object or equipment, n.e.c.
An employee was building an excavator bucket when the 130-pound bucket slid off the work bench and landed on his foot, amputating a portion of his right little toe.
2018-06-06BremertonWashingtonPuget Sound Naval Shipyard, Building 460Fingertip(s)Struck by object falling from vehicle or machinery-other than vehicle part
Employees were moving a metal ring weighing 578 lbs. from a hydraulic lift table to a work bench when the metal ring fell onto one of the employee's left hand catching it between the ring and the work bench and amputating the ring and middle fingertips.
2018-06-01King Of PrussiaPennsylvaniaTech Tube, Inc.Finger(s), fingernail(s)Struck by dislodged flying object, particle
An employee was operating a draw bench when the tube broke, causing it to recoil into and partially amputate the employee's finger.
2018-05-23Chippewa FallsWisconsinVincent Tool Technologies Corp.Finger(s), fingernail(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was moving a piece of plate steel from the floor to a work bench using a crane with an under-hook magnet attachment when the piece of steel fell and crushed the employee's left pointer finger, resulting in partial amputation.
2018-05-19MidlandTexasEndeavor Energy Resources -Wireline DivisionFinger(s), fingernail(s)Nonclassifiable
An employee went to sit down on a bench in a wire line support trailer when he felt pain in his left middle finger. He removed his gloves to investigate and noticed a puncture mark below the first knuckle on his left middle finger. The puncture later became infected, requiring hospitalization.
2018-05-11KyleTexasWalmart #4130Arm(s)Fall on same level due to tripping over an object
An employee tripped over a bench and fell to the floor, breaking an arm and requiring surgery.
2018-05-09Lewis CenterOhioWalmart #2725Hip(s)Fall on same level due to tripping over an object
An employee was cleaning and trying to move a bench when he tripped over a rug behind him and fell to the floor, breaking his hip. He was hospitalized.
2018-05-02Carol StreamIllinoisSaint-Gobain AbrasivesFingertip(s)Contact with objects and equipment
An employee was sharpening a tool on a bench grinder when the tool slipped and he injured his left index fingertip, resulting in a fingertip amputation.
2018-04-26BrooklynNew YorkNYC School Support Services Inc.Fingertip(s)Struck against moving part of machinery or equipment
An employee was cutting wood with a bench saw when it amputated the employee's left middle fingertip. The saw was unguarded at the time.
2018-04-20South PortlandMaineCasco Bay Steel Structures, Inc.Foot (feet)Struck by falling object or equipment, n.e.c.
An employee was working on a steel beam that was sitting on a work bench when a chain from a crane (being operated by a different employee) hit the beam, knocking it off the bench. The beam fell on the employee's left foot, resulting in a foot amputation.
2018-04-20MobileAlabamaVT Mobile Aerospace Engineering, Inc.Lumbar regionOther fall to lower level less than 6 feet
An employee was conducting maintenance work in the cargo area of an aircraft. The employee was leaning on the guardrails of the elevated work platform when the hinge on the guardrail failed and the employee fell approximately 4 feet, landing on a work bench below and injuring his lower back.
2018-04-04QueensburyNew YorkRozell Industries, Inc.BrainFall on same level, n.e.c.
An employee was cutting carbon steel on an automated bench saw when he lost consciousness and fell, striking his head on the concrete floor. He suffered a laceration, concussion, and hematoma to the head.
2018-02-27ToledoOhioLibbey Glass Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
On February 27, 2018, an employee was using a bench grinder when the employee's right hand was pulled into the grinding wheel, amputating the middle fingertip.
2018-02-05EriePennsylvaniaErie Coke CorporationAbdomen, except internal location of diseases or disordersOther fall to lower level 11 to 15 feet
An employee was wheel-barrowing patch mix to the bench area of an oven when he lost his balance and the wheel barrow tipped over. The handle hit his leg and he fell 12 feet to the next level. He was hospitalized for an internal injury around his kidney.
2018-02-01Baton RougeLouisianaRawson Inc.Fingertip(s)Trip over an object without fall
An employee was testing and adjusting a valve assembly. As he was walking towards the valve assembly, that was mounted in a bench vise, his foot caught the air hose in front of the bench, causing him to lurch forward with his hands extended to catch himself. His right index finger entered the one-inch port of the valve as his left hand forced the 24 VDC supply leads connected to the solenoid operated valve to contact one another and short. When they shorted, the valve cycled and amputated the ti
2018-01-15AttleboroMassachusettLeachgarner NonclassifiableFall on same level due to tripping over an object
While walking to a work bench, an employee felt faint, went to sit down, and tripped over a floor scale. The employee was hospitalized.
2017-09-12OrlandoFloridaEZ Rent A CarNonclassifiableBites and stings
An employee was sitting on a bench outside the work office and was bitten by an insect. The employee was hospitalized.
2017-09-02WinslowMaineALCOM, LLC.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was grinding a piece of metal (large socket) on a bench grinder when the piece of metal became caught and dragged his right index finger into the grinder, partially amputating it.
2017-08-16Wilkes BarrePennsylvaniaMohegan Sun Pocono Down LPHip(s)Fall while sitting
An employee was sitting on a picnic bench when she fell off and hit the ground, breaking her hip.
2017-07-22Rehoboth BeachDelawareTJX Companies IncorporatedElbow(s)Fall on same level due to tripping over an object
On 7/22/2017, at approximately 10:30 a.m., an employee tripped over a bench and fell on the floor, breaking her elbow. She was hospitalized and had surgery.
2017-06-27HomesteadFloridaRCMA South Dade Child Development CenterBrainFall on same level due to tripping over an object
An employee was walking when she tripped and fell backwards over a bench, striking the back of her head against the concrete floor.
2017-06-05ShelbyOhioARCELORMITTAL TUBULAR PRODUCTS SHELBY INC.NonclassifiableStruck by dislodged flying object, particle
On June 5, 2017, an employee was rebuilding a bench cylinder when pressure began building in the cylinder and released. The cylinder then struck the employee in the abdomen and pushed the employee into a locker. The employee suffered internal bleeding and crushing injuries, requiring hospitalization.
2017-05-18ShawneeKansasNAZDARFinger(s), fingernail(s)Caught in running equipment or machinery
An employee's left thumb was pulled into a bench grinder and was partially amputated. The grinder was unguarded at the time.
2017-05-10MiddletownOhioVail Rubber Works, Inc.Upper and lower limb(s)Contact with objects and equipment
On May 10, 2017, an employee was removing pins and bolts from a roller when the roller opened up and moved, pinning the employee between the bench and the open roller. The employee suffered a smashed leg and shoulder.
2017-03-29EriePennsylvaniaErie Strayer CompanyLeg(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was using an overhead crane to move a 3/8" thick, 3' x 10' piece of steel plate. There was a chain on the crane hook, which was attached to an eye bolt for moving the steel plate. The steel plate came off the crane hook, bounced off of a bench, and struck the employee in the leg. The employee was hospitalized with a broken leg and had surgery.
2017-02-17AstoriaNew YorkAstoria Generating Company, LPFingertip(s)Struck by falling object or equipment, n.e.c.
While fabricating a metal bench, an employee placed a metal clamp on top of the bench. The clamp was not secured and fell on the employee's right thumb, amputating the tip.
2017-02-08AustinTexasState Farm Insurance CompanyMultiple trunk locationsFall on same level due to tripping over an object
An employee was stepping backward from a chair in the cafeteria when she bumped into a bench behind her and fell, suffering left hip/lower back pain.
2017-02-02Grand ForksNorth DakotaAltru Health SystemFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was moving a work bench when the bench leg collapsed. The bench then amputated his left third finger.
2017-02-01JacksonvilleFloridaMetal Container CorporationFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was assembling the printer pinion gear at his work bench when his right pinky finger was pinched between the bearing housing and the housing of the gear box resulting in the amputation of his right pinky fingertip without bone loss.
2017-01-24AtlantaGeorgiaEmory UniversityMultiple body partsIgnition of vapors, gases, or liquids
A graduate assistant teacher was preparing to run a column chromatograph7 purification wearing a flame retardant lab coat and safety glasses, as well as gloves, long pants and closed toed shoes. A second graduate assistant teacher was sitting at his desk in the same lab at the time. The first teacher struck the bottom of a 4L glass bottle of hexanes on the edge of the bench, while attempting to put the bottle down. The bottom of the bottle sheared off on contact with the bench and the contents s
2017-01-03BridgeportPennsylvaniaTube Methods, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery
An employee's left index finger was pinched by a plow on a draw bench, requiring medical amputation.
2016-10-04TupeloMississippiLeggett & Platt Components Company, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
On October 4, 2016, at approximately 10:00 AM, an employee was operating a small full-revolution clutch mechanical power bench press, forming and punching recliner hardware. The press was equipped with two palm buttons, light curtains, and two mechanical side guards. Unexpectedly, the top ram came down and pinned the employee's left hand against the bottom half of the die. She suffered broken fingers and was hospitalized for surgery.
2016-07-22North EastPennsylvaniaRidg-U-Rac, Inc.Fingertip(s)Caught in running equipment or machinery, n.e.c.
On 7/22/16, at 10:30 a.m., an employee was setting up a shear to shear parts and was adjusting the stops. During the setup, the shear cycled and his left middle finger was caught in the pinch point between the bench and the part hold-down, amputating his fingertip.
2016-06-22New PhiladelphiaOhioLauren ManufacturingFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was cutting rubber parts on a bench cutter when the blade came down and cut her right middle finger (possible amputation).
2016-05-03LancasterPennsylvaniaECORE INTERNATIONALFingertip(s)Compressed or pinched by shifting objects or equipment
The employee was relocating a workbench with another employee to a temporary location so the floor could be painted. While grasping the table from the sides, his left pinky was pinched between the table and a stationary guard rail which resulted in a partial fingertip amputation.
2016-02-24TrappePennsylvaniaAccellentFingertip(s)Caught in running equipment or machinery during regular operation
An employee was pushing tubing into a draw bench when a trolley caught the employee's fingertip, causing an avulsion.
2016-01-08FrankfortIllinoisPactiv LLCFingertip(s)Caught in running equipment or machinery, n.e.c.
An employee was bench-testing a rebuild on a CO2 pump when it unexpectedly cycled and amputated his fingertip.
2015-11-20SheltonConnecticutInline Plastics Corp.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
The employee was working with a bench mounted drill press and amputated the right middle finger at the second knuckle.
2015-11-10AltamontIllinoisIrwin Seating Company Fingertip(s)Caught in running equipment or machinery during regular operation
Three of an employee's left-hand fingertips were amputated while he was adjusting a press brake to bend 90-degree angles on bench seating.
2015-10-24GreeleyColoradoTeasdale FoodsFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was inspecting a disassembled actuated ball valve on a workbench. The employee placed a finger on the valve when it cycled and amputated the left middle fingertip.
2015-09-24WhartonNew JerseyDIMENSIONAL MERCHANDISING, INC.Foot (feet)Struck by object or equipment dropped by injured worker
An employee tried to move a bench in the production shop. The bench fell on her right foot, causing fractures.
2015-07-15RussellvilleArkansasHackney LadishFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
The employee was sharpening a tool on a large bench grinder and his right thumb got caught in the grinder causing a partial amputation.
2015-07-04Big LakeTexasCasedhole Solutions, Inc.Fingertip(s)Injured by slipping or swinging object held by injured worker
An employee was working with a perforating gun on a work bench. He turned the gun and it skipped off the roller wheels and fell on the edge of the table, amputating the index and middle fingertips on his right hand.
2015-03-25EastlakeOhioConn-SelmerFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee suffered an amputation of their left middle finger while working on the draw bench. The employee's finger was caught between the faceplate and the knockoff ring.
2015-03-03Grove CityOhioBuckeye RanchFingertip(s)Caught in running equipment or machinery during regular operation
A maintenance employee was using a drill press when their left pinky finger was caught in a slot on the work bench, resulting in a fingertip amputation.