DateCityStateEmployerBody PartEvent
2021-03-29TowandaIlAlexander Manufacturing CompanyFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
On March 29, 2021, a temporary employee sustained an amputation to the tip of his thumb while attempting to dislodge a stuck blade in a running machine.
2021-01-13TowandaPaJELD-WEN, IncorporatedFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was performing lubrication tasks. His left hand came into contact with a moving belt conveyor and his ring fingertip was amputated.
2020-07-13TowandaPennsylvaniaMK Tree TrimmersNeck, except internal location of diseases or disordersFall or jump curtailed by personal fall arrest system
On July 13, 2020, at approximately 11:45 AM, an employee was in a bucket truck using a chainsaw to cut a tree. While cutting, the chainsaw got stuck, causing the tree to twist. A rope, which is used to lower the tree, swung and caught the employee around the neck. The employee was pulled from the bucket but was suspended by his fall harness. The employee was hospitalized with neck injuries.
2020-05-30TowandaPennsylvaniaJELD-WEN, IncorporatedLower leg(s)Struck by dislodged flying object, particle
An employee was standing near a plywood manufacturing line. A piece of MDF board came down the conveyor path and was automatically ejected, striking the employee's right leg just above the ankle and breaking his tibia and fibula.
2020-03-06TowandaPennsylvaniaGlobal Tungsten & Powders Corp.Multiple body partsExplosion of nonpressurized vapors, gases, or liquids
An employee was visually inspecting the calciner (furnace) tube. When the employee removed the manifold for the calciner tube, tungsten (product) and nitrogen and/or hydrogen caused an explosion inside the calciner tube. Flames shot out of the end of the tube and burned the employee's face and right forearm.
2017-09-21TowandaPennsylvaniaJELD-WEN, IncorporatedLeg(s)Fall through surface or existing opening
An employee fell through a roof deck to the concrete floor below, fracturing his legs and tailbone requiring hospitalization.
2017-09-18TowandaIllinoisAlexander Manufacturing Co.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was watching the operation of a shuttle machine when parts jammed and fell beside the machine's rail. He was attempting to remove the parts when the machine cycled. The clamp then caught and amputated the first digit of his right middle finger.
2017-06-05TowandaPennsylvaniaJohn Greenland Enterprises dba Bradco Supply CompanyBrainStruck or run over by rolling powered vehicle
An employee was working on a truck. He was going to back it out of the shop when he exited the truck to hook up something beneath it. When he hooked up the wires under the truck, the truck began rolling backwards and rolled over the employee. He was pinned under the vehicle, suffering head injuries and broken bones. The truck was running and in reverse at the time of the incident.
2017-02-19TowandaPennsylvaniaSigma Cubed Inc.Chest, except internal location of diseases or disordersOther fall to lower level
On February 19, 2017, an employee slid down a containment mat and struck a pressure gauge on the wellhead while attempting to pull slack in a wire line. He suffered a rib injury that required hospitalization.
2015-03-31TowandaPennsylvaniaKeane Frac LPFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee injured his fingertip while rebuilding a down-hole tube. He was taken to the hospital where part of his finger was amputated.