DateCityStateEmployerBody PartEvent
2021-09-27TexarkanaArCooper Tire Rubber CompanyMultiple face locationsNonroadway collision with object other than vehicle, n.e.c.
An employee was driving a tugger, connected to a full tread cart, down an aisle. The front right corner of the cart contacted the blunt end of a guardrail. The tugger turned sharply and stopped, causing the employee to fall off and strike his face on the guardrail. He suffered fractures to the cheek and around the eye.
2021-05-23TexarkanaArCooper Tire & Rubber Company, Inc.Leg(s)Struck by rolling object or equipment-other than powered vehicle
An employee was placing tire tread onto trays on a tread cart. When employee stepped down between the cart and the guardrail to straighten the tread, the tugger moved and pinned the employee's left leg between the guardrail and the cart and fractured it.
2020-07-28TexarkanaArkansasCOOPER TIRE & RUBBER CO.Multiple body partsContact with hot objects or substances
An employee was overseeing the process of emptying a condensation pit into a relief pit. While observing a pump, hot steam from a condensation tank leaked out onto the employee resulting in first and second degree burns to their back, the backside of both arms, and the backside of both legs.
2020-06-30TexarkanaArkansasCOOPER TIRE & RUBBER CO.Finger(s), fingernail(s)Contact with hot objects or substances
An employee was using a pry bar on a hot mold in a tire change press. His left pinky finger contacted the hot mold, resulting in a burn. He was hospitalized for an infection.
2020-05-21TexarkanaTexasLEDWELL & SON ENTERPRISESMultiple face locationsStruck by falling object or equipment, n.e.c.
An employee was holding a flashlight for his partner who was cutting a bumper off a truck when the bumper fell on the employee. He suffered a broken jaw and a damaged nerve around the eye.
2019-08-28TexarkanaArkansasCooper Tire & Rubber CompanyLower leg(s)Struck by rolling object or equipment being pushed by injured worker
On August 28, 2019, around 3:30 PM, an employee was pulling a 500-pound cart by hand when he backed into a low guardrail that was approximately 1.5 feet tall. The cart then impacted his leg at the calf and shin. The next day, his calf became swollen and blackish, requiring hospitalization and surgery for a muscle injury.
2019-05-25TexarkanaArkansasCooper Tire & Rubber CompanyFinger(s), fingernail(s)Contact with objects and equipment
On May 25, 2019, an employee was pulling a cart when it spun out of control and smash the employee's finger. As a result, the employee's finger was amputated.
2019-04-26TexarkanaArkansasSmith-Blair, Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was operating a shear to cut stainless steel and amputated their left ring, middle, and index fingertips.
2019-04-26TexarkanaArkansasCooper Tire & Rubber CompanyFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was moving a 1000 lbs. tire rack. His right middle finger was caught between tire racks and amputated at the first knuckle.
2019-04-09TexarkanaArkansasHostetler Roofing, LLCLumbar regionFall through surface or existing opening
An employee was rolling up warning line on a roof when he fell through a skylight to the floor. His lower back was injured and he was hospitalized.
2019-03-22TexarkanaTexasRed River Army DepotNeck, except internal location of diseases or disordersJack-knifed or overturned, nonroadway
An employee was test-driving a Humvee when it flipped over. The employee suffered head lacerations requiring stitches, as well as broken cervical bones. The employee was hospitalized.
2018-09-07TexarkanaTexasLinetec ServicesHead and neckDirect exposure to electricity, greater than 220 volts
An employee was working on a utility line when an electrical flash occurred. The employee suffered second degree burns to the face and neck.
2018-07-10TexarkanaTexasLedwell & Son Enterprise Inc.Finger(s), fingernail(s)Caught in running equipment or machinery
An employee was changing the die in a machine when the employee's left hand contacted the brake, resulting in amputation of the left index and pointer fingers.
2018-07-08TexarkanaArkansasCooper Tire & Rubber CompanyFingertip(s)Compressed or pinched by shifting objects or equipment
An employee was using an overhead crane to install a new wheel hub into a tugger drive. She was guiding the unit and when she lowered it, her finger was pinched between the unit and the wheel, severing her middle fingertip and resulting in an amputation.
2018-03-06TexarkanaTexasRed River Army DepotLeg(s)Other fall to lower level less than 6 feet
An employee was standing on a 39-inch platform and inspecting a rocket launcher that was on the back of a truck when the platform tilted and the employee fell to the ground, fracturing a leg.
2018-01-12TexarkanaArkansasCooper Tire & Rubber CompanyFingertip(s)Caught in running equipment or machinery, n.e.c.
An employee was verifying that a tire balancer machine was calibrated when his fingertip was caught and smashed between the machine's contracting panels. His fingertip was amputated.
2017-10-17TexarkanaTexasDyke Industries, Inc.Wrist(s)Other fall to lower level
An employee was securing a load to a flatbed truck when the employee fell from the truck to the ground, fracturing the right wrist and possibly the right foot. The employee was hospitalized.
2017-08-16TexarkanaArkansasCooper Tire & Rubber CompanyFingertip(s)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee was operating an electric-powered forklift. He turned to back up while his hand was resting on the outside of the vehicle. His right ring finger was then smashed between the frame of the vehicle and an adjacent steel rack, amputating his fingertip.
2017-07-14TexarkanaArkansasSmith-Blair, Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was attempting to reposition a pipe that was being cut on a semi-automatic pipe band saw. His left hand was on the pipe when the hydraulic pipe clamp was activated. His left middle fingertip was then caught between the clamp palate and the pipe's side wall, requiring surgical amputation.
2017-06-26TexarkanaTexasRiver Red Army DepotFinger(s), fingernail(s)Struck by swinging part of powered vehicle
An employee was removing a clog from a tail gate when the employee's left finger was caught between the tail gate and the latch pin. The finger had to be surgically amputated.
2017-03-24TexarkanaTexasBrookdale Senior Living Inc.Shoulder(s), including clavicle(s), scapula(e)Fall on same level due to tripping over an object
An employee stepped back and tripped on a coworker's foot, falling to the ground and injuring her right shoulder. She was hospitalized.
2017-02-07TexarkanaTexasHE Wright and Company, Inc.Arm(s)Fall through surface or existing opening
While installing metal sheets on a roof, an employee fell through an old sheet of roofing material to the concrete below, suffering a left arm injury.
2016-09-15TexarkanaArkansasCooper Tire & Rubber Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was removing left bottom roll belts from a pin at the DR machine. The end of the employee's finger was then caught between the pin and a horizontal brace on a hoist.
2016-09-12TexarkanaTexasDepartment of DefenseBack, including spine, spinal cordOverexertion in lifting-single episode
An employee fractured his vertebrae while attempting to lift a military trailer tire for repairs. He was hospitalized.
2016-09-10TexarkanaArkansasCooper Tire Rubber Company NonclassifiableContact with hot objects or substances
An employee was troubleshooting a press due to its unloader fingers not extending. He was standing on the press exit conveyor and platen edge. When he moved the wires on the unloader, the unloader moved in and down. The movement caused him to trip and fall down onto the platen, where he was pinned by the unloader and suffered burns.
2016-05-11TexarkanaTexasCaraustar Industries Inc.Wrist(s)Fall, slip, trip
An employee climbed a dumpster ladder to check how full it was when he fell backwards. He tried to catch his fall and injured his left wrist.
2016-04-20TexarkanaArkansasSMITH-BLAIR,INCAnkle(s)Struck by falling object or equipment, n.e.c.
An employee was walking when he was struck by rubber gaskets that fell from a height of approximately 10 feet. He was hospitalized with a fractured right ankle.
2016-03-16TexarkanaArkansasUnion Tank Car CompanyMultiple body partsIgnition of clothing from controlled heat source
An employee suffered from 2nd and 3rd degree burns to his chest, waist, and left hand when the shirt he was wearing caught fire while he was operating a gas-powered cutting torch to cut 8 bolts.
2016-03-09TexarkanaArkansasCOOPER TIRE & RUBBER CO.Finger(s), fingernail(s)Struck by object falling from vehicle or machinery-other than vehicle part
An employee was removing a spacer from the curing press when a bolt that was holding up the support leg for another piece of equipment (platen) broke. The support leg fell on the employee's right middle finger, smashing it.
2016-02-02TexarkanaTexasRED RIVER ARMY DEPOTFaceStruck by falling object or equipment, n.e.c.
A fire extinguisher fell while it was being serviced, striking an employee in the face. The employee was hospitalized.
2016-01-02TexarkanaTexasPrewitt EnterprisesFoot (feet)Struck by powered vehicle-nontransport, n.e.c.
An employee doing maintenance on a machine suffered a contusion on the top of his left foot when an outrigger was set on it.
2016-01-01TexarkanaArkansasTallant Industrial, IncFingertip(s)Caught in running equipment or machinery during regular operation
An employee was welding a piece of metal (mid-rail) on a platform near a moving conveyor. While he was attempting to get his tools, the tip of his left-hand thumb got caught between the sprocket and chain on the conveyor. When he removed his glove, the tip of his left-hand thumb was amputated. He was hospitalized overnight.
2015-12-07TexarkanaTexasML James Construction CompanyThigh(s)Fall on same level due to tripping
An employee tripped and fell while walking injuring the left femur.
2015-11-07TexarkanaArkansasAbernathy CompanyKnee(s)Exposure through intact skin, eyes, or other exposed tissue
An employee was moving a 55-gallon drum of hydrofluoric acid onto a pallet on a forklift. The employee pushed the drum with his hands and knee. Approximately 1 hour later, he noticed his pant leg was wet and recognized the acid odor. He suffered 2nd degree burns to his knee cap and was hospitalized.
2015-11-02TexarkanaTexasXOTECH, LLCHip(s)Fall on same level, n.e.c.
A motor vehicle mechanic was tightening the nut on a break drum. As the employee was pulling the wrench towards himself he lost balance and fell backwards breaking the right hip.
2015-10-10TexarkanaTexasDepartment of DefenseFingertip(s)Struck by swinging part of powered vehicle
Employee was driving a combat ASV vehicle form a dock area to a staging area. The vehicle has a hatch. When the employee was exiting the vehicle, he hit the button to close the hatch. He pinched his finger in the locking mechanism resulting in the loss of the right ring fingertip.
2015-08-10TexarkanaArkansasCOOPER TIRE & RUBBER COMPANYHand(s)Struck by object falling from vehicle or machinery-other than vehicle part
A bladder assembly fell approximately 1 foot off the tip of a forklift and pinned an employee's left hand between the assembly and the press frame. The employee was hospitalized overnight for broken bones in the left hand.
2015-07-30TexarkanaArkansasCOOPER TIRE AND RUBBER COBODY SYSTEMSExposure to environmental heat
An employee became nauseous and began vomiting. He was hospitalized overnight for heat exhaustion.
2015-07-02TexarkanaTexasHousley Communications, Inc.Chest, except internal location of diseases or disordersStruck by swinging part of powered vehicle
An employee was struck by the bucket of an excavator, sustaining broken ribs.
2015-06-29TexarkanaArkansasTYSONHeel(s)Caught in running equipment or machinery during maintenance, cleaning
An employee's right heel was caught in an auger while installing a choke ring on a press in the processing room. The auger caused lacerations/a fracture to his right heel.
2015-06-23TexarkanaArkansasCOOPER TIRE & RUBBER CO.BODY SYSTEMSExposure to environmental heat
An employee was changing a tire in one of the presses when he reported that he had a light headache. His condition worsened to include nausea and blurry vision. The employee was taken to company healthcare provider and then to the emergency room. His illness was a result of dehydration.
2015-06-10TexarkanaArkansasCOOPER TIRE AND RUBBER COMPANYFingertip(s)Caught in running equipment or machinery during regular operation
An employee removed a rubber boot from a rail car and used his hand to push carbon back into the auger below the rail car. The tip of the employee's left index finger was caught in the auger.
2015-05-11TexarkanaTexasCoca-ColaFoot (feet)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee's foot came off the pallet jack platform and got caught between the platform of the pallet jack and the product.
2015-05-02TexarkanaArkansasCooper Tire & Rubber CompanyFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee's hand was caught underneath the interlocked door of a DR 2203 machine and the cutter that cuts the snow (e.g. nylon overwrap) amputated his right, middle finger just below the fingernail.
2015-04-02TexarkanaArkansasTruman Arnold CompanyHip(s)Other fall to lower level less than 6 feet
An employee fell from a two-rung step ladder while cleaning the company's private airplane, fracturing his left hip.
2015-03-19TexarkanaTexasChristus St. Michael Health SystemHip(s)Fall on same level due to slipping
An employee slipped and fell on wet pavement in the parking lot. The employee had surgery to treat a right hip fracture.
2015-03-17TexarkanaArkansasCooper Tire & Rubber CompanyFinger(s), fingernail(s)Contact with objects and equipment
Am employee operating the bead seater tool had his finger impacted by a heavy retaining ring while adjusting the tool for a tire in another size.
2015-01-10TexarkanaArkansasExpress Employment ProfessionalsNonclassifiableStruck by falling object or equipment
An employee was cutting pipe with a torch. The employee was struck on the foot by falling pipe when the pipe was cut through and the brace supporting it fell.