DateCityStateEmployerBody PartEvent
2020-07-09SussexWisconsinNatures Path Foods Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was training a new operator when a machine jammed. The employee had used an adjustable wrench to remove bolts and was clearing the machine when its moving parts amputated three fingertips on her left hand.
2020-03-31SussexWisconsinQuad GraphicsLeg(s)Caught in running equipment or machinery during maintenance, cleaning
Two electricians/journeyman mechanics were doing preventative maintenance on a high-density storage system, an aisle with two cranes. They were preparing to lubricate the chains on one of the cranes. One of them was on the lift station, seated above the crane on a cross-support bar to perform lubrication and test the vertical limit switch. He tripped the vertical limit switch to begin the work. The crane and the lift station began to move up, and his right leg was pinned and broken between the f
2020-03-19SussexWisconsinHoltger Bros. Inc Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was spooling out cable with a power winch. There was slack in the cable. The winch was put into forward, then reverse; the cable tensed and caught the employee's finger against the metal housing. The employee's fingertip was amputated (without bone loss).
2017-08-14SussexWisconsinGORDY'S CONCRETE PUMPING SERVICE INC.Finger(s), fingernail(s)Injured by slipping or swinging object held by injured worker
An employee was using an impact wrench when it amputated his left pinky finger at the first joint.
2016-08-17SussexWisconsinThe Prestwick Group, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
On or about August 17, 2016, an employee was using a router when the piece slipped and amputated the employee's left middle finger.
2016-06-27SussexWisconsinQUAD/TECH, INC.Knee(s)Slip without fall, n.e.c.
An employee slipped on a piece of wire covering. He twisted his knee, fracturing his patella and tearing a tendon. He was hospitalized for surgery.
2015-11-24SussexWisconsinNature's Path USA II LLCFingertip(s)Caught in running equipment or machinery during maintenance, cleaning
While attempting to clean a jet foam airlock, an employee's fingertips were struck and amputated by the spinning part ("squirrel cage") of the airlock.
2015-08-06SussexWisconsinThe Prestwick Group, Inc.Finger(s), fingernail(s)Struck against moving part of machinery or equipment
An employee operating a table saw came into contact with the saw blade causing a finger amputation.
2015-07-28SussexNew JerseyNelson Tree Services IncPelvisOther fall to lower level 26 to 30 feet
An employee engaged in tree cutting and trimming with a chainsaw fell approximately 30 feet to the ground below when his support rope was cut. He fractured his pelvis.
2015-02-10SussexNew JerseyC & E Tire, Inc.Wrist(s)Struck by swinging or slipping object, other than handheld, n.e.c.
An employee was injured while mounting a small tire. The rim split and the tire struck the employee. The employee received lacerations to his face and fractures to his right wrist. He was transported to Morristown Hospital and admitted for treatment.