Date | City | State | Employer | Body Part | Event |
---|---|---|---|---|---|
2021-11-15 | Mingo Junction | Oh | JSW Steel USA Ohio, Inc. | Multiple body parts | Contact with hot objects or substances |
On November 15, 2021, an employee was splashed with molten metal while measuring steel in a mold. The employee sustained multiple third degree burns on their neck, right hand, and right leg. | |||||
2021-09-07 | White River Junction | Vt | US Postal Service | Lower leg(s) | Other fall to lower level less than 6 feet |
An employee was trying to remove a stuck pin on a loading dock. The employee fell off the loading dock about 3 feet to the pavement below, suffering a broken right tibia and fibula. | |||||
2021-09-03 | Hopewell Junction | Ny | Global Foundries | Ankle(s) | Fall on same level due to slipping |
An employee was putting on a cleanroom suit. When he stood up, he slipped and twisted his left ankle resulting in a fall and a fractured ankle. | |||||
2020-09-26 | Grand Junction | Co | Anytime Labor - Colorado LLC | Pelvis | Other fall to lower level |
A temporary employee was handing barrels to another employee off the back of a truck. A barrel fell on top of another barrel and the temporary employee lost balance and fell off the truck. The employee sustained a broken pelvis. | |||||
2020-06-10 | Mingo Junction | Ohio | Total Equipment Company | Hand(s) and arm(s) | Direct exposure to electricity |
An employee had been performing maintenance on an air compressor. The employee was testing the voltage on the motor control panel when an arc flash occurred. The employee was treated for second and third degree burns to the arm and both hands. | |||||
2020-05-05 | Hopewell Junction | New York | Techtron Environmental, Inc. | Hand(s) | Nonstructural fire, n.e.c. |
While installing plumbing in a clean room, an employee contacted a white powdery substance that burst into flames. The employee suffered thermal burns to the hands. | |||||
2020-04-04 | Princeton Junction | New Jersey | A&E Construction | Head | Fall through surface or existing opening |
An employee had been moving 4 x 8 pieces of wood. The employee fell through a ceiling, landed on the ground, and sustained a laceration to the head. | |||||
2020-02-12 | Grand Junction | Colorado | Spendrup Fan Co. | Lower leg(s) | Compressed or pinched by shifting objects or equipment |
An employee was welding an impeller section when the impeller shifted and he tried to grab it. The impeller spun and struck his left leg, causing a fracture to the left tibial plateau that required surgery and hospitalization. | |||||
2019-09-09 | Mingo Junction | Ohio | JSW Steel USA Ohio, Inc. | Thigh(s) | Climbing or stepping up or down-single episode |
An employee was climbing down a ladder. He was on the second rung when he felt his quadricep pull. He requiring hospitalization and surgery for a detached right quadricep muscle. | |||||
2019-09-08 | Junction City | Kansas | C K Enterprises Inc. | Leg(s) | Fall through surface or existing opening |
An employee was walking from the pack floor to the stuff floor to run a hose through a location so that he could perform a cleaning duty. While he was walking over the clean-in-place (CIP) tank, the grating broke and he fell in. His left leg was burned. The CIP process was being run at the time, so it contained hot water and chemicals. | |||||
2019-07-31 | Junction City | Kansas | Valley Metals | Leg(s) | Explosion, n.e.c. |
An employee was working on a combine truck trying to get a part loose. The employee was using a blow torch when it exploded. The employee was hospitalized with severe burns, especially on the right leg, and smoke inhalation. | |||||
2019-06-27 | Hopewell Junction | New York | Mohegan Associates, Inc. | Multiple arm locations | Other fall to lower level |
An employee was unloading a sign trailer and disconnecting a sign from its travel supports. The employee's right arm was caught on the horizontal stiffener (Z-bar). The employee fell off the trailer and suffered a laceration to the right arm from under the arm pit to below the elbow. The brachial artery was severed. | |||||
2019-06-22 | Grand Junction | Colorado | SAFEWAY | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting sirloin steaks on a bandsaw and lacerated a finger and a knuckle bone. | |||||
2019-04-02 | Junction | Texas | Allen Keller Company | Head and neck | Small-scale (limited) fire |
An employee was using an infrared gun to check the temperature of hot mix that was being loaded into an elevator to feed a silo. The flames rose, burning his face and neck. | |||||
2019-03-08 | Mingo Junction | Ohio | JSW Steel USA Ohio, Inc. | Eye(s) | Exposure through intact skin, eyes, or other exposed tissue |
An employee was sweeping a floor to remove lime. The employee was hospitalized with lime dust irritation in the eyes. | |||||
2019-03-07 | Mingo Junction | Ohio | JSW Steel USA, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was operating a forklift when its hydraulic hose became bound. While the employee was trying to remove the hose, the forklift's mast chain moved, causing an amputation to the employee's left thumb to the first joint. | |||||
2019-03-03 | Yeehaw Junction | Florida | RANGER CONSTRUCTION INDUSTRIES, INC. | Nonclassifiable | Other jump to lower level 16 to 20 feet |
A vehicle struck a guardrail that was immediately behind the employee. The employee jumped over a guardrail and then fell approximately 20 feet into a cattle crossing and sustained multiple broken bones and injuries to the teeth. | |||||
2019-02-25 | Grand Junction | Colorado | Helmerich & Payne International Drilling Co. | Fingertip(s) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was guiding the first joint of casing into a conductor in a cellar area. A centralizer (secured around a pipe) was pushed through the rotary table. The centralizer slid down the pipe and caught the employee's left ring finger against the collar on the casing. The employee's left ring fingertip was amputated. | |||||
2018-09-25 | Monmouth Junction | New Jersey | Nuvida Plastic Technology | Multiple body parts | Contact with hot objects or substances |
Two employees were trying to start up a plastics extruder after a maintenance shutdown. As they tried to resolve an overpressurization problem, molten plastic began spraying from the screen changer vents. Both employees suffered burns to the head, torso, and upper extremities. They were hospitalized. | |||||
2018-09-20 | Grand Junction | Colorado | INNOVATIVE TEXTILES, INC. | Finger(s), fingernail(s) | Entangled in other object or equipment |
An employee was wrapping fishing line onto a spinning hub when the employee's right index finger became caught in the line. The employee pulled the finger away, resulting in an amputation above the top of the nail. | |||||
2018-06-26 | Junction City | Kansas | Smithfield Foods | Lower leg(s) | Fall on same level due to tripping over an object |
An employee was taping liner on a combo when he tripped over the corner of a pallet and fractured his tibia. | |||||
2018-06-06 | Grand Junction | Colorado | St. Mary's Medical Center | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was loading a deposit into a safe and when she turned the mechanism to load the deposit bag, it caught her hand and amputated part of her left middle finger. | |||||
2018-02-07 | Grand Junction | Colorado | STA of Colorado | Upper arm(s) | Overexertion in lifting-single episode |
An employee tore a bicep muscle while attempting to lift the hood of a truck. | |||||
2018-01-27 | Grand Junction | Colorado | Ferguson Enterprises | Hip(s) | Other fall to lower level |
An employee tripped and fell to the ground while descending a ladder, fracturing the left hip. | |||||
2018-01-22 | Grand Junction | Colorado | Student Transportation of America | Brain | Fall on same level due to slipping |
While walking across a snow-covered parking lot, an employee slipped on a patch of ice and impacted the frozen ground, suffering a subcutaneous bleed and head trauma. | |||||
2017-09-06 | Junction City | Kansas | O'Reilly Auto Enterprises LLC. | Leg(s) | Struck or run over by rolling powered vehicle |
An employee exited a vehicle to speak with a customer and then noticed the vehicle was moving. While attempting to get back into the vehicle, the employee was struck by the door and then run over by the vehicle, suffering tissue damage to the right leg. The employee was hospitalized overnight and had surgery. | |||||
2017-07-24 | Grand Junction | Colorado | Estes Express | Finger(s), fingernail(s) | Other fall to lower level |
An employee had just finished unloading a truck. He was descending the truck on a ladder while pulling the trailer door of the truck down when he missed a step and fell. As he fell, he pulled the door down with him and it landed on his left ring finger, breaking it. He was hospitalized and had surgery. | |||||
2017-05-18 | Junction City | Kansas | UPU Industries, Inc. | Abdomen, except internal location of diseases or disorders | Overexertion in lifting-single episode |
An employee participated in a two-person lift of a core pole that weighs approximately 100 lbs. at a loom machine. The employee suffered an incarcerated umbilical hernia that required surgery. | |||||
2017-05-09 | Grand Junction | Colorado | United States Forest Service | Multiple trunk locations | Thrown, fell, or jumped from animal being ridden |
An employee was breaking a horse in a training corral when the horse bucked the employee to the ground. He injured his back and ribs and was hospitalized. | |||||
2017-04-20 | Grand Junction | Colorado | Specialized Roustabout Services LLC | Arm(s) | Struck by dislodged flying object, particle |
An employee was using a chain to winch an object when the chain snapped and a tow cable smashed through the window and broke the employee's right arm. | |||||
2017-04-05 | Grand Junction | Colorado | ADCOCK CONCRETE, Inc. | Fingertip(s) | Injured by slipping or swinging object held by injured worker |
An employee was cutting lumber to make a form for a concrete slab. The saw kicked back and cut the tip of his right index finger resulting in amputation of the fingertip. | |||||
2017-03-03 | Grand Junction | Colorado | Charter Communications LLC | Leg(s) | Fall on same level |
While attempting to contact a potential customer, an employee was chased by a dog. While running away, he fell and broke a leg. | |||||
2016-09-27 | Grand Junction | Colorado | Spendrup Fan Company | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was using a lathe and sandpaper to sand a piece of metal pipe. As he was sanding the pipe, the sandpaper wrapped around the lathe and then wrapped itself around the second and third fingers of his right hand, partially amputating them. | |||||
2016-09-07 | Monmouth Junction | New Jersey | Nuvida Plastic Technology | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was cleaning a jammed outlet pipe on the spin dryer and amputated a fingertip. | |||||
2016-08-07 | Grand Junction | Colorado | Pacific Steel & Recycling | Upper arm(s) | Struck by dislodged flying object, particle |
An employee was using a hand chisel and hammer to remove the blade from the lower pocket of the shear head. While he was driving the chisel with the hammer, a small piece of metal came off and punctured his arm 3 inches above the elbow. | |||||
2016-07-18 | Junction City | Kansas | Foot Locker, Inc. | Foot (feet) | Part of occupant’s body caught between vehicle and other object in nonroadway transport incident |
An employee was operating a forklift when their foot became caught between the forklift and an I-beam. The operator's foot was broken. | |||||
2016-04-29 | Junction | Texas | West Bear Creek | Pelvis | Caught between rolling powered vehicle and other object |
An employee was moving a forklift and stepped off. The forklift rolled backwards and pinned the employee between a pipe rail and the forklift. The employee suffered a pelvic injury. | |||||
2016-02-18 | Grand Junction | Colorado | Bureau of Reclamation, Western Colorado Area Office | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting laminate flooring on a table saw when his left-hand fingers were cut by the saw. | |||||
2016-01-01 | Grand Junction | Colorado | Sprouts Farmers Market | Fingertip(s) | Injured by slipping or swinging object held by injured worker |
An employee cut his fingertip while cutting meat with a knife. | |||||
2015-12-10 | Grand Junction | Colorado | Delta Rigging and Tools | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee's hand got caught in a machine press, amputating the right index finger. | |||||
2015-11-24 | Grand Junction | Colorado | Holiday Retirement | Whole body | Pedestrian struck by forward-moving vehicle in nonroadway area |
An unknown vehicle struck and dragged an employee 60 feet in the work-site parking lot. He was hospitalized with injuries to his entire body. | |||||
2015-11-17 | Grand Junction | Colorado | ST MARY'S REGIONAL MEDICAL CENTER | Ankle(s) | Fall on same level |
The employee was walking into the building from the parking lot and fell onto the landscaping rock injuring both ankles. The right ankle was fractured and dislocated. The left ankle was sprained. | |||||
2015-08-30 | Grand Junction | Colorado | CoorsTek Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee attempted to retrieve a piece of ceramic material that broke off into the tape laminator machine he was using. His right index and middle fingertips were amputated by the machinery. | |||||
2015-08-29 | Grand Junction | Colorado | Aramark Health Care | Pelvis | Struck by object falling from vehicle or machinery-other than vehicle part |
On August 29, 2015, at approximately 5:00 p.m., an employee was unloading material using a built-in hydraulic lift gate attached to the rear of the delivery truck. The material fell on and broke the employee's pelvis. | |||||
2015-08-06 | Grand Junction | Colorado | INNOVATIVE TEXTILES | Fingertip(s) | Entangled in other object or equipment |
An employee, working as a winder, was threading a spool of high grade fishing line and got the right index finger caught up in the line amputating the tip. | |||||
2015-07-20 | Junction City | Kansas | Hamm Inc. | Hand(s) | Struck by falling part of powered vehicle still attached |
An employee was helping a coworker replace struts. They were lining up pins when the supportive strap broke. The truck cab fell and crushed the employee's left hand, resulting in hospitalization. | |||||
2015-07-15 | Monmouth Junction | New Jersey | Alston Construction Company, LLC | Hip(s) | Other fall to lower level less than 6 feet |
An employee was trying to access a tool box located on company pick-up truck by climbing the back bumper. His foot slipped and he fell to the ground injuring his hip. | |||||
2015-07-10 | Rotterdam Junction | New York | SI Group, Inc. | Face | Exposure through intact skin, eyes, or other exposed tissue |
A maintenance employee was troubleshooting batteries for a sprinkler diesel pump when the battery exploded acid into the employee's face. The employee sustained burns. | |||||
2015-04-30 | Grand Junction | Colorado | Halliburton Energy Services, Inc. | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee reached into a 12-inch pipe opening and a hydraulic valve closed on his left hand, partially amputating three fingers and causing skin loss to the back of his hand. He was hospitalized. | |||||
2015-03-05 | Junction City | Kansas | Smithfield Farmland Corp. | Finger(s), fingernail(s) | Part of occupant’s body caught between vehicle and other object in nonroadway transport incident |
An employee partially amputated his left-hand middle finger when his hand got caught between the forklift he was operating and a vat dumper safety bar. | |||||
2015-02-28 | Grand Junction | Colorado | Saenz Roofing, Inc. | Nonclassifiable | Other fall to lower level 11 to 15 feet |
An employee performing roofing work fell approximately 12 feet. He was laying down substrate at the time of the accident in preparation for the placement of roof shingles. | |||||
2015-02-10 | Hopewell Junction | New York | IBM CORPORATION | Nonclassifiable | Exposure through intact skin, eyes, or other exposed tissue |
Employee was working in the Wets Tool Area which has hydrofluoric acid (HF) in the wafer and tool area. The employee was exposed to HF and was sent to the Burn Unit in Lehigh Valley Hospital in Allentown, PA. The employee is scheduled for skin graft surgery. | |||||
2015-02-02 | Hopewell Junction | New York | IBM | Hip(s) | Fall on same level due to slipping |
An employee walking in the parking lot, slipped on snow/ice and fell injuring his hip. | |||||
2015-02-01 | White River Junction | Vermont | U.S. POSTAL SERVICE | Leg(s) | Fall through surface or existing opening |
Employee broke his leg falling through a platform. |