DateCityStateEmployerBody PartEvent
2021-11-16JonesboroArRiceland Foods, Inc.Back, including spine, spinal cordOther fall to lower level less than 6 feet
An employee was climbing a ladder to check a metal detector when he fell approximately 4 feet to the floor, landing on his back, resulting in a back injury.
2021-11-11JonesboroArSoutheastern Freight Lines, Inc.Thigh(s)Struck by shifting load during transport, nonroadway
On November 12, 2021, at 9:45 AM, an employee was using a pallet jack to deliver goods to the front door of a school. As he started to turn, the load shifted and began to fall. The material fell and struck his left leg and hip, resulting in a broken left femur.
2021-10-21JonesboroArDelta Materials HandlingMultiple body partsStruck by falling object or equipment, n.e.c.
An employee was standing under the slip sheet attachment of a forklift, which was raised in the air as the employee installed a lift chain. The push-pole attachment fell on the employee and resulted in severe injuries to the shoulder, back, legs, and hip. The employee was hospitalized.
2021-10-15JonesboroArHytrol Conveyor Company, Inc.Leg(s)Other fall to lower level less than 6 feet
An employee was cooling off at a receiving dock after welding. He leaned on the plastic safety chain guarding the door and fell 5 feet 10 inches to the concrete surface below. He suffered a broken right leg and was hospitalized.
2021-08-23JonesboroArFedEx GroundBODY SYSTEMSExposure to environmental heat
At about 6:00 p.m. on August 23, 2021, an employee became ill while working as a package handler. The employee was hospitalized, suffering from dehydration.
2021-07-01JonesboroArRiceland Foods, Inc.Finger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
A 2500 lbs. tote bag had fallen over. An employee was holding open a loop on top of the bag to accommodate the forks of a forklift. His finger was caught between the forks and the loop and the pad of the right middle finger was amputated.
2020-10-03JonesboroArAgri Marketing Inc.Finger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was clearing a rice milling machine and caught his left hand in the auger resulting in fractured bones in the hand and wrist and amputation of the left index finger.
2020-09-21JonesboroArSHANNON KEE CONSTRUCTION, LLCFoot(feet) and leg(s)Pedestrian struck by vehicle backing up in nonroadway area
An employee was walking beside a 12-ton bulldozer, holding a dirt grading rod. The bulldozer, moving in reverse, struck and fractured his left femur and right foot.
2020-07-28JonesboroGeorgiaCGL CompaniesFingertip(s)Compressed or pinched by shifting objects or equipment
Two employees were fixing a commercial washing machine. As the drum was being manually spun to bring a broken airline into view, the injured employee's left middle finger became caught in the pulley system resulting in amputation of the fingertip.
2020-07-17JonesboroArkansasArkansas Glass Container CorporationBODY SYSTEMSExposure to environmental heat
An employee was supervising a shift starting at 5:30 PM and was also assisting in running the glass machines. Around 2:30 AM, the employee began to cramp up and went home. He was later hospitalized with heat exhaustion.
2020-06-09JonesboroArkansasArkansas Glass Container CorporationFinger(s), fingernail(s)Caught in running equipment or machinery
A brace surrounding the photo eye on the stretch wrapper machine was loose, causing the photo eye to be misaligned. This caused the chain to stop on the conveyor. An employee knelt down to adjust the brace. His hand was on the chain guard on both sides of the brace when the photo eye became aligned and the chain started up again. The chain caught his right middle finger causing a partial amputation to the distal phalanx.
2020-04-23JonesboroGeorgiaTHE SHIPPERS GROUPFingertip(s)Caught in running equipment or machinery during regular operation
On April 23, 2020, at approximately 8:25 p.m., an employee was adjusting the position of a conveyor belt. He grabbed the belt with both hands in order to pull the belt over. As he was pulling the belt over, the fingers on his left hand were pinched between the belt and roller, amputating his left ring fingertip and fracturing his left middle finger.
2020-04-19JonesboroArkansasRiceland Foods, Inc.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was cleaning a rice miller's cooling chamber discharge. The feed screw inside the machine caught his right index finger, amputating it below the nailbed.
2020-03-27JonesboroArkansasRiceland Foods, Inc.Fingertip(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was working on an R-valve that was clogged with rice. He was using a metal rod to break up the clog. When the clog of rice broke loose, the blades in the R-valve started to rotate and amputated his left middle fingertip.
2019-09-22JonesboroGeorgiaThe Krystal CompanyNonclassifiableStabbing, cutting, slashing, piercing
An employee was working in the back of a restaurant when a man came in and stabbed the employee eight times.
2019-09-12JonesboroArkansasGreat Dane TrailersFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
While an employee was making an adjustment on the rivet squeezers, the machine actuated and caused an amputation of the right thumb proximal to the nail bed.
2019-09-09JonesboroArkansasGreat Dane TrailersFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was building the frame of a trailer. The trailer frame was lowered via hydraulics while the employee's finger was in a pinch point. The distal portion of his left fifth digit was amputated.
2019-08-22JonesboroArkansasLawrence Hall Health and RehabiliationHip(s)Fall on same level due to tripping over an object
An employee tripped while adjusting a fall mat, falling to the floor and suffering a hip fracture.
2019-07-18JonesboroArkansasBEST MANUFACTURING INC.Fingertip(s)Caught in or compressed by equipment or objects
Two employees were working on a malfunctioning conveyor, attempting to free it by hand. When the table became free, one employee's hand was pinched and the padding behind his right fingertip was amputated.
2019-05-31JonesboroArkansasHytrol Conveyor Company, Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was forming a part on a brake press machine when the employee's finger was pinched between the part and the die, resulting in a right index fingertip amputation and a broken right index finger.
2019-05-18JonesboroArkansasARKANSAS GLASS CONTAINER CORP.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was sitting at the light station inspecting glass containers and noticed a piece of metal equipment from the forming department on the line. The employee was removing it from the line when the metal snagged her glove and amputated her left pinky finger.
2019-04-01JonesboroArkansasBUSCH AGRICULTURAL RESOURCES, INCWrist(s) and arm(s)Direct exposure to electricity, greater than 220 volts
An employee was on an aerial man lift inspecting a roof when the employee contacted a powerline, suffering second/third degree burns on the right arm from the bicep to the wrist.
2019-02-20JonesboroArkansasAll Scapes Irrigation & Lawncare LLCFaceFall through surface or existing opening
While installing an attic ladder in a home, an employee slipped and fell from the attic onto some shelving and a concrete floor. The employee suffered a facial fracture.
2019-01-22JonesboroArkansasHytrol Conveyor Company, Inc.Finger(s), fingernail(s)Caught in running equipment or machinery, n.e.c.
An employee was working on a conveyor that had just been manufactured, testing its speed. A section of the conveyor was missing rollers; this exposed the V-belt and pulley sheave. As the employee measured the belt's speed, his left ring finger was caught between the V-belt and pulley sheave and was amputated.
2019-01-15JonesboroGeorgiaCoca-Cola United BottlingThigh(s)Fall on same level due to slipping
An employee slipped and fell on the floor while moving a cooler, tearing the left thigh muscle tendon from the knee.
2018-09-19JonesboroArkansasCamfil Farr Air Pollution ControlBrainOther fall to lower level less than 6 feet
An employee climbed onto a flatbed truck to rearrange pallets and create space for another pallet. The wooden pallet the employee was moving broke and the employee fell approximately 4.5 feet to the ground, hitting his head on a paved surface. He suffered head trauma and was hospitalized.
2018-08-08JonesboroGeorgiaLori's Transportation & Excavation, LLCMultiple body partsContact with hot objects or substances
An employee was attempting to clean out a tack truck when the spray bar expelled tar/tack onto the employee. He suffered second degree burns to the right side of his face, ear, neck, chest, and arm.
2018-07-19JonesboroArkansasAsphalt Producers LLCShoulder(s) and arm(s)Contact with hot objects or substances
An employee was preparing to unload liquid asphalt from the tanker truck into the storage tank at the asphalt plant. Hot oil splashed onto the employee after the cap was removed to hook up the hose. The employee sustained burns to the arms and shoulders (4.5% of his body). The safety valve was not closed at the time of the incident.
2018-06-08JonesboroArkansasTENENBAUM RECYCLING GROUP (TRG), LLC.Neck, except internal location of diseases or disordersStruck by object or equipment
An employee was working in the iron yard sorting incoming metal scrap at the exit point of the metal shear. The metal shear is located outside and there is a hole through the wall where the conveyor conveys metal scrap into the building where the operator workstation is located. There is a heavy rubber matting that hangs above the conveyor as a safety barrier to protect the employee from potential flying metal. A gap in the heavy rubber matting caused some metal to come underneath the plastic st
2018-06-03JonesboroGeorgiaLa Unica 2Finger(s), fingernail(s)Struck against moving part of machinery or equipment
An employee amputated the left ring finger to the middle knuckle while cutting pork ribs with a meat band saw.
2018-05-14JonesboroArkansasAnimal Medical Center BODY SYSTEMSExposure to other harmful substances
An employee was using medicated shampoo to bathe a dog with a lot of ticks when the employee became ill with nausea and dizziness. The employee was hospitalized.
2018-04-19JonesboroArkansasArkansas Glass Container CorporationFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was retrieving a tool that was dropped into the container former machine when the baffle arm on the machine struck the employee's elbow forcing the employee's right hand into the machine where it was trapped under a baffle. The employee's right ring finger was amputated just above the knuckle.
2018-03-13JonesboroArkansasE & M ContractingAbdomen, except internal location of diseases or disordersExcavation or trenching cave-in
An employee was working inside a trench approximately 3 feet deep. An excavator was working above him when the weight of the excavator caused one of the trench walls to fall, pushing the rebar cage into the employee and striking his abdomen. He was hospitalized with abdominal bleeding.
2018-01-20JonesboroArkansasCrane CompositesFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was clearing a jam in a panel/film and tensioner wheel. The employee raided the tensioner wheel set and began pushing the panel/film out of the wheels. The thumb of the his left glove became caught in the tensioner wheel assembly, pulling his hand through the top and bottom wheels. Once his hand travelled through, he was able to free it. His left thumb fractured.
2018-01-09JonesboroArkansasGreat Dane Fingertip(s)Caught in running equipment or machinery during regular operation
An employee was using a metal shear to shear an 8' x 16" wide aluminum scrap roofing material to 4" x 4" test strips when his hand went under the guard and the stops came down and crushed both of his index fingertips. His left index finger required a 5 mm amputation from the tip end of the bone. His right index finger was debrided.
2017-10-10JonesboroArkansasFocus Inc.Wrist(s) and arm(s)Fall on same level due to tripping over an object
An employee went to a residential house to provide assistance for a consumer. As she went to turn on the light, she tripped on the corner of a shoe that was laying in the floor. She tried to catch herself when she fell, breaking several bones in her left wrist and radial bone.
2017-06-24JonesboroGeorgiaStrictly Mechanical, Inc.Head and trunkOther fall to lower level
An employee fell off an 8-foot ladder while changing a ceiling filter, injuring his back and head and requiring hospitalization.
2017-05-20JonesboroArkansasArkansas Glass Container CorporationAnkle(s)Other fall to lower level
An employee had just picked up a pallet of product with a forklift when he noticed the product had shifted. He stopped the forklift and climbed on the forklift to adjust the product. He lost his balance and landed on his left foot, fracturing his left ankle.
2017-05-12JonesboroArkansasHytrol Conveyor Company, Inc.Fingertip(s)Caught in running equipment or machinery during regular operation
An employee and a coworker were operating a saw with dual palm buttons. The employee was on the left side holding a 2 x 4 wooden board to be cut toward the back stop on the machine. The coworker was on the right side and actuated the palm buttons while the employee's left thumb was in the point of operation. When the blade came up, it amputated approximately 1/4" of the employee's left thumb tip. The saw was unguarded at the time.
2017-05-11JonesboroArkansasFrito-LayLower leg(s)Part of occupant’s body caught between vehicle and other object in nonroadway transport incident
An employee was traveling down an aisle in the warehouse when the forklift he was operating veered and struck a support column. His leg became pinned between the body of the forklift and the support column. He sustained multiple fractures to his lower left leg, which was amputated below the knee.
2017-05-05JonesboroTexasUsed Tractor PartsAbdomen, except internal location of diseases or disordersIgnition of clothing from controlled heat source
On May 5, 2017, an employee was using a cutting torch to dismantle equipment when the employee's shirt caught on fire. The employee suffered first and second degree burns to the abdomen and was hospitalized.
2017-02-04JonesboroGeorgiaHorizon Staffing Inc.BrainFall on same level, n.e.c.
An employee was packing potato chips into boxes and had a seizure. He fell and hit his head on a table and then the floor. The employee was admitted to a hospital.
2016-10-01JonesboroArkansasHytrolFingertip(s)Caught in or compressed by equipment or objects
An employee was making an adjustment to the stretch-wrap machine when his finger was caught between the drive wheel and the machine frame, severely lacerating his left first fingertip.
2016-05-06JonesboroGeorgiaShippers Warehouse of GeorgiaFinger(s), fingernail(s)Contact with hot objects or substances
An employee was working with a sealer for packaging shipments when it jammed. The employee tried to clear the jam, triggering it to close, and burned the four fingers on his left hand, resulting in hospitalization.
2016-03-18JonesboroArkansasFocus, Inc.Nose, except internal location of diseases or disordersFall on same level due to slipping
An employee walked outside to get the client's newspaper and slipped in the client's garage. She fell and hit her face on the tracks of the garage door, suffering a nasal septal fracture and upper lip lacerations.
2016-03-11JonesboroGeorgiaTrue Value CompanyFoot (feet)Nonroadway collision with other vehicle
An employee was operating a powered industrial truck (PIT) to move product through the shipping area. The employee's PIT collided with another PIT, and the employee suffered a lacerated and fractured left foot, requiring hospitalization.
2015-12-09JonesboroArkansasWindmill Rice CompanyFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee attempted to clean rice bran from the trunk of a whitening machine. His right hand contacted a rotating blade, amputating 1 inch of his middle finger. The machine was not locked out at the time of the incident.
2015-09-02JonesboroArkansasApex Tool Group LLC.Finger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating a brake press. She reached for a piece of metal and stepped on the press pedal. The press cycled and partially amputated her right middle and ring fingers, requiring surgery.
2015-06-01JonesboroArkansasThomas & BettsFingertip(s)Caught in running equipment or machinery during regular operation
An employee's finger got caught in the manual bender machine while loading a pipe, amputating the right ring fingertip.
2015-05-27JonesboroArkansasButterball LLCHand(s) and finger(s)Caught in running equipment or machinery during maintenance, cleaning
An employee removed a guard on the ST04 to clear a jam in the packaging film. After clearing the jam, the employee removed meat from the pockets to be rerun. The employee reached in the seal head area which had a sensor that triggered the lift to raise the form box to the seal head. The employee's left hand was caught between the seal head and the form box. The employee sustained third degree burns to the top of their left hand and two broken fingers.
2015-04-09JonesboroArkansasApex Tool Group LLC.NonclassifiableCollision between a moving and standing vehicle, nonroadway
An employee and a contractor were using a scissor lift to reach the top of the black powder spray booth where steel tanks are brought in to be painted. The employee was going to clean the top of the booth, while the contractor was going to work on the lighting in the area above the booth. The product-carrier which brings the steel tanks to the paint booth was not locked out. The product-carrier started to bring a steel tank to the spray booth and made contact with the scissor-lift. The carrier t