DateCityStateEmployerBody PartEvent
2021-02-04InglesideTxMorgan Towing INC DBA Texas Wrecker ServiceArm(s)Struck by dislodged flying object, particle
An employee was attempting to winch a stuck excavator when he was struck by flying debris. The employee sustained a broken arm and an injured torso.
2020-09-13InglesideTxCallan Marine LTD.Toes(s), toenail(s)Caught in running equipment or machinery during regular operation
An employee was standing next to a spool, guiding a cable as it was spooled on. The employee was caught between the cable and the box, suffering a broken right big toe and amputations of three other toes.
2020-08-18InglesideTxKiewit Offshore Services, Ltd.Abdomen, except internal location of diseases or disordersStruck against stationary object or equipment, n.e.c.
An employee was inspecting the welds on a 10-inch pipe. A 24-inch pipe next to the 10-inch pipe rolled off a piece of dunnage while the employee was passing over it, causing the employee to strike the 10-inch pipe with his right side. He suffered a kidney injury and was hospitalized.
2019-09-23InglesideTexasLexicon, Inc.PelvisCompressed or pinched between two stationary objects
While trying to dislodge a stuck sling, a rigger was caught between two 24-inch pipes and suffered a pelvic fracture. The rigger was hospitalized.
2019-07-31InglesideTexasMPG Pipeline ContractorsLower leg(s)Struck by falling object or equipment
While being cut, a 20-inch metal pipe separated and a section struck an employee's lower right leg, causing broken bones.
2019-01-17InglesideTexasCamacho Demolition, LLCThigh(s)Fall from collapsing structure or equipment 6 to 10 feet
An employee was cutting metal from an elevated position of approximately 10 feet. He was tied off to the structure he was cutting. When he cut the structure, it came loose, and both he and the structure fell to the ground. He suffered a broken left leg above the knee, a bump on the back of the left ear, and scratches above the right eye.
2018-07-13InglesideTexasKiewit Offshore ServicesFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was using a crane to move steel plates onto a scaffold's deck. The plates shifted and made contact with a scaffold pole, pinching the employee's left little finger. The employee suffered an amputation/avulsion of about a quarter inch of the finger.
2018-02-28InglesideTexasSubsea 7 (US) LLCArm(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was cleaning between the pipe roller stands in a prep rack when a pop-up roller was activated and lowered. The employee's arm was caught between the roller stops, breaking it and requiring hospitalization.
2017-08-09InglesideTexasTeam Industrial ServicesChest, except internal location of diseases or disordersOther fall to lower level
An employee fell from an exchanger rig as he descended. The employee fell onto a basket made of angle iron and fractured ribs and bruised a lung.
2017-05-08InglesideTexasKIEWIT OFFSHORE SERVICES LTDPelvisFall or jump curtailed by personal fall arrest system
An employee in a manlift basket had just finished a painting job. He was wearing a harness and coming down with the manlift when he fell from the basket and struck it, breaking his pelvis.
2016-09-08InglesideTexasPerformance Contractors, Inc. Finger(s), fingernail(s)Injured by slipping or swinging object held by injured worker
An employee was using a portable bandsaw to cut a metal I-beam when the saw blade amputated the employee's left index finger.
2016-05-05InglesideTexasIndustrial Specialist Inc.FaceStruck by object or equipment
An employee was struck by a roof jack on the left side of the face while working in a tank with a floating roof.
2016-02-24InglesideTexasCCC GroupNonclassifiableStruck by falling object or equipment, n.e.c.
An employee was unloading a metal table from a trailer with coworkers when the table flipped and landed on top of the employee. The employee was crushed and required hospitalization.
2016-01-20InglesideTexasAker SolutionsFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee was operating a paddle valve in an elevated lock position on the global SCM running tool. The valve self-assisted to the open position crushing his left pinkie finger between the paddle valve and the SCM running tool frame. The employee had an open laceration as well as an open fracture that was repaired at the hospital.
2015-09-12InglesideTexasInnovative Manpower SolutionFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was preparing to fabricate a clamp for a pipe. As he was rotating the pipe, it pinched his left finger to the knuckle resulting in amputation.
2015-08-23InglesideTexasSERIMAX LLCArm(s)Other fall to lower level less than 6 feet
An employee fell off the back of a pickup truck and broke his left arm.
2015-08-03InglesideTexasBrace Integrated Services Inc.NonclassifiableOther fall to lower level 11 to 15 feet
An employee slipped on a scaffold ladder rung, lost his grip, and fell approximately 14 feet to the ground.
2015-06-15InglesideTexasGulf Marine Fabricators, LPMultiple body partsOther fall to lower level less than 6 feet
An employee was moving a pipe on a transporter. He was positioned backwards, and his foot went into a 0.5- to 1-inch access opening that connects transporters together. There were screws missing from the access hatch, which moved the access plate and caused the employee to fall over the side of the transporter from a height of 4 feet, 4.5 inches to the ground. The employee landed on a board, breaking a leg and a rib on his right side.
2015-02-09InglesideTexasEnergy Services SouthLower leg(s)Struck by swinging or slipping object, other than handheld, n.e.c.
Employee was struck by a 12-inch pipe while it was being lowered into a three-foot deep trench, breaking his leg in two places above the ankle.