DateCityStateEmployerBody PartEvent
2021-09-08DenisonTxSoutheast Power Corporation WesternLower leg(s)Struck by object or equipment rolling freely
An employee was unloading wooden utility poles. A pole was put on ground by a front-end loader. The pole then rolled downhill onto the employee's leg fracturing the tibia and fibula.
2021-06-20DenisonTxTexoma Medical CenterBrainFall while sitting
An employee was moving to sit in a chair when it slipped out from under her. Her back and neck struck the chair and the floor, and she suffered a brain bleed.
2021-02-05DenisonTxRuiz FoodsFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was clearing a jam off a conveyor when the employee sustained a partial amputation of their right index finger.
2020-09-18DenisonTxChampion Cooler Corp.Forearm(s)Caught in running equipment or machinery during regular operation
Two employees were operating a 300-ton press. The injured employee was stacking manufactured parts from the mechanical press. As the injured employee was removing a cut part from the press, the press activated and his arm was crushed in the press. The employee's arm was amputated at mid forearm.
2020-09-17DenisonTxACS Manufacturing Inc.HeadOther fall to lower level
An employee was working on an 8-foot ladder and fell backwards from the ladder onto the concrete and striking his head on the threshold of a doorway. The employee sustained a head contusion and laceration.
2019-05-16DenisonTexasChampion CoolerMultiple lower extremities locationsFall through surface or existing opening
An employee was walking on metal grate flooring above a chemical tank and fell through a section of the grate. His right foot was submerged in the chemical mixture that was heated to 160 degrees, and caused second degree burns half way up his shin.
2019-02-26DenisonTexasACS Manufacturing, Inc.Hand(s)Caught in running equipment or machinery during regular operation
An employee was operating a press brake and suffered a crushing injury to the left hand.
2018-02-08DenisonTexasCole ServicesFoot (feet)Stepped on object
An employee was standing on a 5-gallon bucket when he stepped down onto an upright welding rod and impaled his right foot.
2017-10-05DenisonTexasACS Manufacturing, Inc.Eye(s)Struck by dislodged flying object, particle
An employee was using a pneumatic rivet gun to insert rivets into pre-drilled holes when metal shavings/fragments were blown into the employee's right eye, requiring surgery.
2017-10-02DenisonTexasRuiz FoodsHand(s)Caught in running equipment or machinery during regular operation
An employee was using an industrial mixer to mix filler when he attempted to wipe the filler off the mixer. His right hand went into the opening and was struck by one of the mixer paddles, lacerating and fracturing it. The mixer was guarded at the time.
2017-07-17DenisonTexasSpectrum Brands HHIFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was attempting to clear a jam on a riveting machine when the rivet head fell on and amputated the employee's right index finger.
2016-09-27DenisonTexasDenison IndustriesFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
An employee entered a robot cell through an opening used to remove sand. As the employee attempted to adjust the casting, the saw caught and cut the employee's finger. An interlocked gate was in place at the time.
2016-08-29DenisonTexasDenison IndustriesBODY SYSTEMSExposure to environmental heat
An employee suffered a heat related illness while working at or near a furnace.
2016-05-19DenisonTexasRuiz FoodsWrist(s)Fall on same level, n.e.c.
While sorting food product, an employee stepped off a stand, lost balance, and fell to the floor, breaking a wrist.
2016-02-03DenisonTexasCHAMPION COOLER CORPORATIONForearm(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was performing maintenance on the trough machine. The guard was removed to ensure the machine was operating properly. One of the troughs fell out of the machine and activated the micro-switch, which activated the machine cycle. The employee's left forearm was caught and injured in the machine.
2015-11-02DenisonTexasACS MANUFACTURINGMultiple lower extremities locationsStruck by falling object or equipment, n.e.c.
An employee was attempting to weld a piece of sheet metal to another assembly. The tack weld broke and the sheet metal fell onto the employee possibly fracturing the right knee, left ankle and heel.
2015-10-20DenisonTexasStephenson WholesaleUpper and lower limb(s)Roadway incident involving motorized land vehicle
An employee involved in an automobile accident suffered a broken wrist and leg.
2015-08-24DenisonTexasACS Manufacturing, Inc.BODY SYSTEMSExposure to environmental heat
Employee was fabricating sound proof enclosures and began not feeling well. He was given water and told to sit down and rest. The employee became sick to his stomach and complained of chest pain. The employee was hospitalized for dehydration.
2015-07-13DenisonTexasRuiz FoodsFinger(s), fingernail(s)Caught in running equipment or machinery during regular operation
A machine drops dough into a hopper and then onto a conveyor. The machine operator knelt down on the ground and his hand went under the conveyor. His hand activated a sensor that signals the dough cutter to come down and cut/section the dough. The dough cutter, which is not a blade but a chunter, pinched the thumb on his left hand.
2015-02-06DenisonTexasSunset LogisticsFinger(s), fingernail(s)Contact with objects and equipment, n.e.c.
The employee was cleaning the windshield of a semi-truck with the hood of the truck open. He finished cleaning the windshield and went to step down when his wedding ring caught on the hood. The weight of the employee's body and the ring being caught on the hood caused the hood to cut the employee's finger. The finger was later amputated at the hospital.