DateCityStateEmployerBody PartEvent
2021-07-08CalvertonNyCoastal Pipeline Products CorporationLeg(s)Other fall to lower level 6 to 10 feet
An employee was standing on top of a 9-foot concrete structure and fell to the ground below. The employee sustained a fractured leg.
2021-06-13CalvertonNyEastern Wholesale Fence Co., Inc.Finger(s), fingernail(s)Struck against moving part of machinery or equipment
An employee was cutting PVC boards using a chop saw and amputated his left thumb and index finger.
2021-05-24CalvertonNyEastern Wholesale Fence LLCFingertip(s)Caught in running equipment or machinery during regular operation
An employee was operating the notching machine and amputated their right middle fingertip.
2020-10-15CalvertonNyCALVERTON NATIONAL CEMETERYAnkle(s)Other fall to lower level
An employee fell from the cage of a forklift while cutting branches. The employee landed on the ground and fractured his right ankle.
2020-07-09CalvertAlabamaSSSI Inc DBA Songer Steel ServicesFinger(s), fingernail(s)Compressed or pinched by shifting objects or equipment
An employee was rigging a heat exchanger to a crane. As the crane was applying tension to the load, the rigging slipped. The employee was trying to move the rigging back into place when his hand was caught in the pinch point. Three of his fingers were broken.
2020-03-31CalvertAlabamaSteel Warehouse of AlabamaHand(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was cleaning a slitter machine when the employee's hand was caught in the rollers, removing skin from the hand. The employee was hospitalized.
2020-03-19CalvertAlabamaAM/NS Calvert, LLCHand(s)Direct exposure to electricity
An employee was troubleshooting an overhead crane. A part in the electrical cabinet caused an arc flash that burned his right hand. He was hospitalized.
2019-05-14CalvertonNew YorkMichael Reilly Design, Inc.Hand(s), except finger(s)Struck against moving part of machinery or equipment
An employee was using a chop saw to cut pieces of wood. He made a cut with the chop saw and moved back to his workstation with the piece of wood. He went to make an additional cut. The chop saw blade was still spinning from the previous cut when his left hand contacted the moving blade, causing a laceration between the index finger and the thumb.
2019-05-03CalvertonNew YorkRiverhead Building SupplyFinger(s), fingernail(s)Struck against moving part of machinery or equipment
An employee was using a table saw to rip wood when the employee's right hand made contact with the spinning circular blade, causing a severe laceration between the right thumb and forefinger. The employee was hospitalized and had surgery.
2019-04-27CalvertonNew YorkC&H Rentals & Leasing, LLCLeg(s)Caught in running equipment or machinery
An employee was working on a crane and suffered a broken leg.
2019-04-01CalvertonNew YorkIsland International Exterior Fabricators, LLCHand(s)Caught in running equipment or machinery during regular operation
An employee injured his hand while using a press brake.
2019-03-12CalvertAlabamaTMS International, LLCHand(s) and arm(s)Contact with hot objects or substances
An employee was removing a fill plug from the differential on a heavy loader. Hot oil causing second degree burns to the employee's left hand and right arm.
2019-01-28CalvertAlabamaAM/NS Calvert, LLCFinger(s), fingernail(s)Caught in running equipment or machinery during maintenance, cleaning
An employee was cleaning the rotary valve of a machine when his right middle and ring fingers were caught in the valve. The employee was hospitalized and both fingers were amputated to the first knuckle.
2018-09-10CalvertAlabamaAM/NS Calvert, LLCFoot (feet)Caught in or compressed by equipment or objects
An employee was changing out a work roll in a tilt plant at a finish mill. His left foot was caught and broken in a pinch point.
2018-07-19CalvertAlabamaOutokumpu Stainless USA, LLC.Fingertip(s)Caught in or compressed by equipment or objects
An employee was helping straighten out steel coils. Bands were in place to hold the coils; a hold-down bar was about to be lowered so that pressure could be applied to a coil and the bands would be further tightened. The bar was lowered while the employee's right hand was on top of the coil. His index fingertip was caught between the coil and the bar, resulting in an amputation.
2018-06-06CalvertAlabamaOutokumpu Stainless USA, LLCUpper and lower limb(s)Contact with hot objects or substances
An employee was lacing using an oxygen lancer. Concrete was heated by the lance and metal slag shot into the air and contacted the injured employee. The employee sustained burns to the left foot and right hand.
2018-03-19CalvertAlabamaOutokumpu Stainless USA, LLC.Chest, except internal location of diseases or disordersCompressed or pinched by shifting objects or equipment
An employee was assisting the crane operator with the four way rigging to a crop bucket for removal at the melt shop area of the plant and was caught between the lifting device and the hand rail resulting in three fractured ribs on the right side.
2018-01-25CalvertAlabamaOutokumpu Stainless USA LLCWrist(s)Exposure through intact skin, eyes, or other exposed tissue
An employee was cleaning when he bumped into a vertical pipe containing hydrofluoric acid. The acid dripped down under his gloves, burning the top of his left wrist. The pipe had been flushed at the time of the incident, but a section had a few ounces of trapped acid. The employee was hospitalized.
2017-03-22CalvertAlabamaTMS International, LLCBack, including spine, spinal cordIgnition of vapors, gases, or liquids
An employee was cutting demo scrap with a gas and oxygen torch when he felt his back getting hot. After removing his jacket and shirt, he found a burn roughly the size of a sheet of paper in the middle of his back. He was hospitalized.
2016-08-24CalvertAlabamaMoody's Electric, INC.Ankle(s)Other fall to lower level less than 6 feet
An employee fell three feet off a ladder and fractured the right ankle.
2016-08-18Calvert CityKentuckyJames MarineFingertip(s)Struck by discharged object or substance
An employee was using a safety tool designed to unstop a paint sprayer (spray gun) when the gun blew paint out the front or side and injected it into the employee's fingertip. He underwent surgery to remove the paint/debris.
2016-07-18CalvertonNew YorkGLAMOUR TRANSPORTATION CORP.NonclassifiableOther fall to lower level
An employee fell from a vehicle trailer.
2016-03-17CalvertAlabamaOutokumpu Stainless USA, LLCNonclassifiableExposure through intact skin, eyes, or other exposed tissue
An employee was sprayed by chemicals while checking a valve on a storage tank containing mixed acid. The employee suffered chemical burns and was hospitalized.
2015-08-03CalvertAlabamaOutokumpu Stainless USA, LLCUpper arm(s)Fall on same level while climbing stairs, steps, or curbs
An employee was walking up some steps and fell. During the fall, he cut his right bicep on a piece of metal.
2015-06-11CalvertonNew YorkRiverhead Building Supply Corp.Abdomen, except internal location of diseases or disordersOverexertion in lifting-single episode
An employee sustained a hernia while loading a piece of lumber onto a molding machine and was hospitalized.
2015-05-30CalvertonNew YorkEastern Wholesale Fence Co., Inc.NonclassifiableDirect exposure to electricity
An employee was burned by an arc flash/blast while troubleshooting an electrical problem.
2015-03-12CalvertAlabamaOtokumpu Stainless USA, LLC.Multiple trunk locationsMoving in opposite directions, oncoming, nonroadway
An employee driving a cart (similar to a golf cart) struck an oncoming forklift, causing severe internal injuries.
2015-03-08CalvertonNew YorkEastern Wholesale Fence Co., Inc.Fingertip(s)Nonclassifiable
An employee amputated her left middle fingertip.
2015-02-14CalvertAlabamaAM/NS Calvert LLC Hip(s)Fall on same level
On February 16, 2015, employee walking on flat level ground collapsed and broke his hip.
2015-02-03CalvertAlabamaDeshazo Crane CompanyMultiple mouth locationsInjured by slipping or swinging object held by injured worker
Employee using a sledge hammer to straighten a piece of metal had his grip on the hammer slip. The handle of the hammer then came back and struck his jaw, breaking his jaw and knocking out several teeth.