Date | City | State | Employer | Body Part | Event |
---|---|---|---|---|---|
2021-11-03 | Blytheville | Ar | Hays Store Inc. | Hip(s) | Fall on same level due to tripping over an object |
An employee was moving an empty dolly in the packet room. As she backed up, her left heel struck an empty pallet and she fell onto it. She suffered a broken left hip. | |||||
2021-08-05 | Blytheville | Ar | JMS Russel Metals Corp. | Hand(s) and arm(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was working on a slitter machine when the rubbers on its arbor caught his right hand and pulled his arm through the slitter head. The employee's right hand and arm were crushed. | |||||
2021-07-31 | Blytheville | Ar | H and M Construction Co., Inc. | Finger(s), fingernail(s) | Struck by falling object or equipment, n.e.c. |
An employee was lying on a concrete slab immediately next to an unloader. The unloader had been raised on a hydraulic jack so the employee could make a shim adjustment to it. When the employee lowered the unloader after making the adjustment, it fell and struck the employee, who suffered a 10-inch horizontal laceration to the chest; the amputation of three fingers on the left hand; a cut to the left side of the head; cuts on the upper right arm; and bruises to the back, left hip, and right shoul | |||||
2021-05-05 | Blytheville | Ar | Phoenix Services, LLC | Nonclassifiable | Ingestion of harmful substance |
At 4:45 p.m. on May 5, 2021, an employee was cutting up steel scrap with an oxygen lance rod. A piece of hot slag went under his face shield, bounced off his chest, entered his mouth, and was swallowed. He was hospitalized. | |||||
2021-02-04 | Blytheville | Ar | The Goodyear Tire and Rubber Company | Hip(s) | Fall on same level due to tripping over an object |
An employee walked around the counter to exit and tripped over two small lawnmower tires, falling to the floor. The employee sustained a fractured right hip. | |||||
2020-09-29 | Blytheville | Ar | Ellis Processing & Material Handling LLC | Thigh(s) | Fall onto or against object on same level, n.e.c. |
An employee was standing on top of a fuel truck refueling another vehicle. He slipped and a 3/4-inch metal rod (connected to the truck's railing behind the cab) impaled his left thigh, entering from the rear of the thigh but not passing completely through. | |||||
2020-09-08 | Blytheville | Ar | JMS Russel Metals Corp. | Thigh(s) | Standing, standing up-single episode |
An employee was in a parked golf cart. He placed his feet on the ground beside the golf cart and grabbed the side of the cart to prepare his body to stand. As he stood up, he felt a pop in his right leg and fell over onto the ground. He was hospitalized with a broken femur in his right leg. His leg had a weakened bone due to a prosthetic from a previous amputation he had suffered. | |||||
2020-08-25 | Blytheville | Ar | Calstrip Steel Corp. | Finger(s), fingernail(s) | Caught in or compressed by equipment or objects |
An employee was removing a small strap coil band from an arbor by sliding off the uncoiler drum. The drum was still collapsing to allow the coil to be removed, and as it closed it crushed and broke the employee's right ring and little fingers. | |||||
2020-02-20 | Blytheville | Arkansas | LEXICON, INC. DBA SCHUECK STEEL | Finger(s), fingernail(s) | Compressed or pinched by shifting objects or equipment |
An employee and a coworker were completing a roll change at the caster runout. They had already removed the old roll and were putting the new roll into final position. The roll was supported by an overhead crane. The coworker on the west end of the roll was providing hand signals to the crane operator in the cab. The injured employee was on the east end of the roll trying to guide the bolts into the bolt holes. The injured employee's finger was caught between the flange of the bearing housing an | |||||
2020-01-30 | Blytheville | Arkansas | Walmart Supercenter #62 | Thigh(s) | Fall on same level due to slipping |
An employee was walking toward a customer to take an order at the deli when the employee slipped on grease from rotisserie chickens that was on the floor and impacted the ground. The employee sustained a fractured right femur. | |||||
2020-01-24 | Blytheville | Arkansas | Chris-Hill Construction Co., LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was attempting to help another employee remove a 70 lb. stop/guide pin from leads. The injured employee's left ring finger was between the leads and the pin when the other employee struck the pin with a sledgehammer to free it. As a result, his left ring fingertip was amputated. | |||||
2019-09-05 | Blytheville | Arkansas | Lally Pipe & Tube | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was threading pipe on a machine with two separate clamps, one outside and one inside. The inner clamp closed on the employee's right little finger, partially amputating it. | |||||
2019-07-17 | Blytheville | Arkansas | JMS Russel Metals Corp. | BODY SYSTEMS | Exposure to environmental heat |
An employee had been sitting idle in an air conditioned 18-wheeler and then came into the office with symptoms of lightheadedness, dizziness, and slightly elevated blood pressure. The employee was hospitalized due to heat stress (dehydration, heat exhaustion). | |||||
2019-07-12 | Blytheville | Arkansas | Nucor Steel Arkansas | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was working to de-chock a set of four high work rolls which were being removed from the roll mill for maintenance. While he was removing the spreader bar, he was caught in a pinch point between the spreader bar and a roll resulting in amputation of the right pinky fingertip. | |||||
2019-04-20 | Blytheville | Arkansas | Systems Plant Services, Inc. | Fingertip(s) | Contact with objects and equipment |
The injured employee was helping to load a toolbox onto a trailer. As employees were lifting the toolbox, the rigging slipped, amputating the tip of the injured employee's right pinky finger. | |||||
2018-08-29 | Blytheville | Arkansas | Nibco Inc | BODY SYSTEMS | Exposure to environmental heat |
A temporary employee was pouring hot metal at a foundry when he began suffering from cramps. He left work and was hospitalized for dehydration. | |||||
2018-07-05 | Blytheville | Arkansas | Nucor Castrip Arkansas, LLC | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was checking the entry gauge function on a machine. The machine's lid closed, coming down on the employee's right hand. His right little fingertip was severely injured and had to be surgically removed. | |||||
2018-05-25 | Blytheville | Arkansas | NUCOR-YAMATO STEEL, Inc. | Foot(feet) and leg(s) | Contact with hot objects or substances |
A caster operator was removing a safety blank while wearing heavy welding gloves to insert a smaller nozzle in a casting tundish holding molten steel. The blank fell onto the top of the shroud, causing the molten steel to splatter onto his flame-resistant clothing and metatarsal safety boots. He suffered second- and third-degree burns to his lower legs and feet. | |||||
2018-05-14 | Blytheville | Arkansas | Stracener Brothers Construction | BODY SYSTEMS | Exposure to environmental heat |
On May 14, 2018, an employee was working on a sheet metal roof and started to experience symptoms related to heat illness. The employee was admitted to the hospital for heat exhaustion and dehydration. | |||||
2018-04-19 | Blytheville | Arkansas | Primetals Technologies USA, LLC | Foot (feet) | Struck by object falling from vehicle or machinery-other than vehicle part |
An employee was using a crane to lift a 1,200 lb., 36" x 18" solid copper block that was chocked with a nylon strap. The strap was not centered. When the employee lifted the block approximately 3" from the pallet it was sitting on, the block pivoted, fell from the strap, and struck the employee on his right foot. His 1st, 2nd and 3rd metatarsal bones were fractured, requiring hospitalization and surgery. | |||||
2018-01-31 | Blytheville | Arkansas | Tenaris Hickman | Hip(s) | Fall on same level |
An employee was walking out a door and fell onto the concrete sidewalk fracturing her right hip. | |||||
2017-08-02 | Blytheville | Arkansas | JMS Russel Metals Corp. | Leg(s) | Caught in or compressed by equipment or objects |
An employee was wrapping a coil of steel with an ID band at an exit turnstile and slitter cart. His right leg was over the rail between the cart and the end stop when the cart moved and pinned his right leg, breaking it. | |||||
2017-07-25 | Blytheville | Arkansas | Arkansas Electric Cooperative, Inc | BODY SYSTEMS | Exposure to environmental heat |
An employee became ill while installing new poles, requiring overnight hospitalization for dehydration/heat exhaustion. | |||||
2017-05-16 | Blytheville | Arkansas | JMS RUSSEL METALS CORP. | Finger(s), fingernail(s) | Caught in running equipment or machinery |
An employee was leaning against a guard that rotates a product conveyor when his glove became caught in a gap on the conveyor and began rotating. As he pulled his hand out of the glove, his left ring fingertip and nail were amputated. | |||||
2017-04-19 | Blytheville | Arkansas | Kinder Morgan | Neck, except internal location of diseases or disorders | Jack-knifed or overturned, roadway |
An employee was driving a haul truck when the vehicle drove off the road and overturned. The employee struck his head on the cab of the truck, suffering a forehead laceration and compression fracture to his cervical vertebrae. | |||||
2017-03-12 | Blytheville | Arkansas | NUCOR-YAMATO STEEL, Inc. | Thigh(s) | Other fall to lower level less than 6 feet |
An employee was descending a fixed ladder after installing a thermocouple for a reheat furnace when he missed the bottom rung, lost his balance, and fell to the floor. He fractured his right femur and required hospitalization. | |||||
2017-01-25 | Blytheville | Arkansas | Lining & Coating Solutions, LLC | Face | Explosion |
An employee was installing a lining in a pipe that was operating when the inverter blew up and a piece of equipment struck the employee's face. | |||||
2017-01-16 | Blytheville | Arkansas | Tenaris Hickman | Nose, except internal location of diseases or disorders | Struck by dislodged flying object, particle |
An employee was changing the blade of the B-line chop saw located in the PMC finishing area. As he tightened a nut with a wrench, the saw activated and the wrench was ejected from the machine striking the employee in the face. The employee sustained a fractured nose and facial lacerations. | |||||
2016-10-11 | Blytheville | Arkansas | Thompson Industrial Services LLC | Foot (feet) | Struck by discharged object or substance |
An employee was using a pressure washer to clean sludge in the bottom of a pit when the pressure washer's water stream penetrated the employee's boot and was injected into the top of the left foot. | |||||
2016-09-20 | Blytheville | Arkansas | Nucor-Yamato Steel Company | Shoulder(s), including clavicle(s), scapula(e) | Other fall to lower level less than 6 feet |
An employee was scanning a bundle of steel for inventory on a flatbed railcar. He was turning to step down from the railcar when he lost his footing and fell approximately 3.5 feet to the ground, injuring his shoulder. | |||||
2016-07-22 | Blytheville | Arkansas | DAWSON EMPLOYMENT SERVICE, INC. | BODY SYSTEMS | Exposure to environmental heat |
An employee lost consciousness while operating light construction equipment due to heat illness and was hospitalized. | |||||
2016-07-19 | Blytheville | Arkansas | Tenaris Hickman LP | Abdomen, except internal location of diseases or disorders | Struck by dislodged flying object, particle |
An employee was using a cutting torch to cut a strip of steel from a master coil cylinder. The strip of steel that was under tension struck the employee in the stomach. | |||||
2016-07-18 | Blytheville | Arkansas | Crop Production Services, Inc. | BODY SYSTEMS | Exposure to environmental heat |
An employee had been outside in hot temperatures for approximately three hours standing on the ground watching bags of feed being loaded into a hopper bottom truck. The employee began feeling ill so he went and sat down for a while. When he stood up he seemed to be confused. He was admitted overnight for heat exhaustion. | |||||
2016-05-14 | Blytheville | Arkansas | KT-Grant, Inc. | Multiple body parts | Contact with hot objects or substances |
An employee was cleaning out a drop-out chamber with a Grant machine. Material fell onto the wet ground creating steam that caused second degree burns to the employee's face, ears, neck and knees. | |||||
2016-01-20 | Blytheville | Arkansas | Walmart | Brain | Fall on same level due to slipping |
On 1/20/2016 at approximately noon, an employee slipped on ice in the parking lot and fell, striking her head. The employee was admitted to the hospital. | |||||
2015-12-30 | Blytheville | Arkansas | D & L Inc | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee placed a sheet metal pipe for an HVAC duct into a roll former. His left index finger was caught between the sheet metal pipe and the die when the roller's foot pedal was actuated. The employee's left index fingertip was partially amputated. | |||||
2015-09-07 | Blytheville | Arkansas | Arkansas Northeastern Scrap Processing | Leg(s) | Struck by falling object or equipment, n.e.c. |
An employee was performing maintenance underneath a truck when the jack holding the truck into position slid/slipped, causing the vehicle to make contact with the employees right leg. The employee was hospitalized with a broken right leg. | |||||
2015-08-24 | Blytheville | Arkansas | JMC Steel Group | Lower leg(s) | Other fall to lower level less than 6 feet |
An employee was on a short step ladder removing a synthetic strap used in binding steel tubing/pipes when he fell off the step ladder fracturing the top left tibia plateau, close to the knee. | |||||
2015-08-03 | Blytheville | Arkansas | Aviation Repair Technologies | Abdomen, except internal location of diseases or disorders | Nonroadway collision with object other than vehicle, n.e.c. |
Employee was in a boom lift elevated approximately 7 ft. high and was maneuvering the lift backwards when he became pinned between an aircraft wing and the lift. The employee was hospitalized with trauma to his abdomen that required surgery. | |||||
2015-05-12 | Blytheville | Arkansas | TEMPS PLUS STAFFING INC | Toes(s), toenail(s) | Struck by powered vehicle-nontransport, n.e.c. |
An employee was taking flange coil to the beam line on a coil car. When he stepped off the coil car, he did not remove his hand from the control button. The coil car kept moving, ran over his right foot, and severed all five of his appendages. | |||||
2015-03-28 | Blytheville | Arkansas | DADDY RABBITS TRUCK WASH & TIRE SERVICE | Multiple face locations | Struck by object falling from vehicle or machinery-other than vehicle part |
The injured employee's coworker was moving a rear suspension with a Sky-Trac forklift in the salvage yard located off of Interstate 55, Exit 71, near Blytheville. A piece of the suspension broke off and hit the injured employee in the face, fracturing his jaw, eye socket, and forehead. He was hospitalized for facial reconstruction. | |||||
2015-03-06 | Blytheville | Arkansas | SCHNEIDER NATIONAL CARRIERS | Multiple pelvic region locations | Fall on same level due to slipping |
An employee was walking to the store loading dock when he slipped and fell on ice. He injured his hip and buttocks area. | |||||
2015-02-19 | Blytheville | Arkansas | Tenaris Hickman | Foot (feet) | Fall on same level due to slipping |
An employee was walking through the yard to get his equipment and slipped and fell on the ice. The employee twisted his ankle and chipped a bone in his foot which required surgery. |