Crankshaft and camshaft machining are two processes that are often done in close proximity to each other. However, because of the high-speed and heavy work involved, these processes can lead to a number of injuries. In this article, we’ll discuss some of the most common crankshaft and camshaft machining injuries, and what you can do to prevent them.
Industrial crankshaft and camshaft machining is a very dangerous job. It can involve high speed metalworking, and the risk of injury is high. According to the National Institute for Occupational Safety and Health, machinists are nearly four times as likely to suffer a machining injury than workers in other occupations. This is because they are working with high speed tools, in difficult and challenging conditions. One of the most common types of industrial crank shaft and camshaft machining injuries is hand and finger injuries. When the operator’s hand comes into contact with the rotating parts of the machine, it can cause major damage. A finger may need to be amputated, which can be very traumatic. Other injuries that machinists often suffer include back pain, neck pain, and arm pain. In many cases, these injuries are from taking improper safety precautions. For example, workers often don’t wear gloves or protective eye wear when they are machining. This leaves them open to injury from tools and other materials that are being worked with.
If you’re thinking about machining your own crankshaft or camshaft, you should be aware of the serious injuries that can occur. Here are five of the most common mistakes and how to avoid them.
1. Not using a proper cutting tool – A dull or improperly sharp edge on your cutting tool can cause severe damage to your shaft or cam. Always use a quality tool and test it before starting any machining project.
2. Not following safety guidelines – Safety is always paramount when working with machinery, and crankshaft and camshaft machining is no exception. Follow all safety guidelines for the specific machine you are using and always use adequate protective gear.
3. Not checking the workpiece for fit – Checking the fit of your workpiece during each step of machining is crucial to preventing damage. If the fit isn’t correct, make necessary changes before proceeding with the operation.
4. Not properly cleaning the machine – After each operation, clean the machine thoroughly to prevent build-up that can cause problems later on. Use a suitable cleaner and allow it to run through the machine until it’s clean.
5. Not following product instructions – Always read the product
If you have been injured by Crankshaft And Camshaft Machining, you should contact an attorney. Your attorney can help you get the compensation you deserve.